Post Buy Requirement
G. M. Industries
Thane, Maharashtra, India
gstGST : 27BRYPS1606N1ZW Verified Add Review

Industrial Heaters

GM INDUCTION HEATER MODEL GM 12V

We offer gm induction heater model gm 12v vertical type.
View Complete Details

Induction Heater

We are offering induction heater.
Gm induction heaters are designed to heat the bearings and other shrink-fit components prior to mounting, using latest technology intelligent microcontroller based electronic controls.
The life of bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.
Gm induction heaters are available in different models for mounting, range of bearings having bore size from 10 mm and above. Fast, safe and economical heating of bearings is best features of gm induction heaters.
View Complete Details

Induction Heater

gm induction heatersare designed to heat the bearings and other shrink-fit components prior to mounting, using latest technology intelligent microcontroller based electronic controls.


the life of bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.


gm induction heatersare available in different models for mounting, range of bearings having bore size from 10 mm and above. Fast, safe and economical heating of bearings is best features ofgm induction heaters.

gm induction heater - gm 04is light weight and portable for better performance. It has power capacity of 2 to 4.0 kva. The controls are intelligent microcontroller based programmable electronic controls. It has two operating modes, temperature mode and time mode. Both are controlled through feather touch key board. Both modes can be seen at the time of operation. It can also be used to heat bearings of larger diameter using a pair of raiser blocks size 55 x 55 x 130 mm. The unit can also be used to heat a plate of any magnetic material by placing the plate in place of the horizontal yoke across the vertical supports.

TECHNICAL DATA SHEET
Product Data GM 04
1) Power 2.0 to 4.0 KVA
2) Voltage 230V or 110V±10%, 50-60Hz
3) Current (Max) 10 / 18A
4) Power Control 25% 50% 75% & 100%
5) Temperature Control (Range) 0-250oC
    Maximum Temperature 400oC
    Accuracy Temperature ± 3oC
6) Time-Control 0-99 Minutes
7) Residual Magnestium <1A / cm
8) Overall dimensions (wxdxh) (mm) 300 X 270 X 330
9) Space between supports (wxh) (mm) 140 X 130
10) Weight (Main Unit) 27 Kg.
11) Weight with Standard Yokes 32 Kg
12 ) Horizontal York Sizes (mm) 20 X 20 X 250 for bore dia. 25 MM & above
  30 X 30 X250 for bore dia. 40 MM & above
  55 X 55 X 250 for bore dia.
75 MM & above
13) Colour of the Equipment RED / BLUE & APPLE GREEN
Optional Accessories
1) Horizontal Yoke Sizes (mm) 10 X 10 X 250 for bore dia. 
12 MM & above
  15 X 15 X 250 for bore dia.
20 MM & above
  40 X 40 X 250 for bore dia. 
55 MM & above
  45 X 45 X 250 for bore dia. 
61 MM & above
2) Digital Thermometer (0-500 C)
3) Roll-Sliding Model
4) Swing Arm Model
5) Riser Block (Pair) (mm)
6) Magnetic Temperature Probe
7) Equipment Trolley
8) Hydraulic Equipment Trolley





GM Induction Heater Range
 Induction Heater GM04 
(2 to 4KVA)
 Induction Heater GM10 
(6 to 10KVA)
 Induction Heater GM12 
(12 to 16KVA)
 Induction Heater GM25 
(25 to 40KVA)
 Induction Heater GM50 
(50 to 80KVA)
 Induction Heater GM100 
(100 to 150KVA)
 Induction Heater GMIR 
(25 to 150KVA)
 Motorised Bearing Extractor 
GM BEM 30
Motorised CTRB Extractor 
GM CTRB100
GM Hydraulic Product Range
 Hydraulic Puller GMP - Series Hydraulic Puller with Separate Hand Pump GMS - Series Hydraulic Puller with Inbuilt Pump GMM - Series
Hydraulic Pullerwith with Inbuilt Pump & Separator GMR - Series  Bearing Pullers GMBP - Series Bearing Fitting Tool Kit
 Highpressure Oil Injector GM IP - Series  Hydraulic Bearing Extractor GM BET - Series Hydraulic Power Pack GM PC - Series
Hydraulic Stackers GM ST - series Hydraulic Pallet Truck GM PT - Series AC / DC Stackers GM ST 902 / 903 - Series
Hydraulic Scissor Lift GM SS 910 /909 Series Drum Leafter cum Tilter GM DT - series Hydraulic Press GM PP - Series
Hydraulic High Pressure Valves GM HV - Series    









View Complete Details

Induction Heaters

  • Voltage 2 / 3 Ø X 415V ± 10%
Induction Heaters are designed to heat the Bearings and other shrink-fit components prior to mounting, using latest technology intelligent microcontroller based electronic controls. The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • A. P. Singh (G. M. Industries)
  • Unit No. 7, Shailesh Industrial Estate, Navghar, Vasai (east). Thane - 401 210 Maharashtra. India - 401210
  • Share us via
  • Call 08068051313 Ext. 114