Sheffer Industries

Bhuleshwar, Mumbai, Maharashtra

We are prominent manufacturer, importer and exporter of quality Firefighter Suit. Firefighter suit consist of fire fighter jackets & trousers. The description of fire fighter jackets & trousers are given below.

Fire Fighter Jackets:

• Wide shoulder seams give plentiful freedom of movement
• Water-, windproof and breathable due to high performance membrane
• Highly heat resistant, stable zip with cover flaps
• Length of jacket 92 cm (size s and m)
• Two side hip pockets with flaps
• Flame protection collar, on the backside to wear up to the helmet bottom
• Nomex knitwear wristlet extended over the hands
• 5 cm wide silver strips at the ends of the jackets back side and around the end of the sleeves

Fire Fighter Trousers:

• High freedom of movement through a loose, especially low-necked crotch seam
• Water-, windproof and breathable due to high performance membrane
• The back of the trousers is extended upwards, so as to provide extra protection to the kidney areas
• On the trouser legs circulating, 5 cm wide silver strips

The new Firefighter Helmet, tested for structural fire fighting are under extreme conditions:

• Meets NFPA 1971, 2007 edition
• Unique glass fibre compositehelmet shell
• Easilyadjustable
• Revolutionaryhelmet lamp system(optional)
• Still more convincingarguments.

Applications : nomex coveralls are an industry standard for petrochemicals, utilities, military applications, auto racing, volunteer and professional fire fighters and can be used asarc flash clothing. Not recommended for : use around any molten substances, welding operations, or in a critical static control application.We are best Flame Retardant Coveralls Manufacturer and Nomex Fire Suits Manufacturer affordably. Flame resistance : are inherently flame resistant and this property can not be degraded by laundering. Colors : will dye in a wide range of colors with mixed colorfast to laundering; some shades good, some fair ; also available in a solution dyed form where fiber is dyed in the fiber forming process. This limits color selection, but provides improved colorfastness at increased costs. Thermal stability : has good thermal stability and does not melt. The fiber decomposes between 700 degrees f. - 800 degrees f. And is inappropriate and not recommended for use around any molten substances or welding operations. Hot molten contact will will stick to the fiber, forming holes. Processing : for best color retention, launder processing should be carried out at 140 degrees f. Or less in buffered, nonionic detergents. However, higher temperature/harsher detergent laundering will only affect the color, not the performance of the fabric. Garments may be dry cleaned in either perchloroethylene or petroleum solvents. They may be conditioned or tunnel finished at up to 280 degrees f. Fabric temperature. Garment life : under normal wear conditions, as long as 3-5 years, or 2-3 times the life of conventional 65% polyester/35% cotton and 3-5 times the life of fr cotton. Garments are extremely durable and can be expected to perform well for many years in applications where longevity can be utilized.

Kevlar twill fabricthis kevlar fabric provides the improved cosmetics and drapability of a twillweave. Ideal for impact resistant applications requiring the lightweight, highstrength properties of kevlar where pattern show-through is desirable. resin compatibility:kevlartwill weave fabric, is compatible with polyester, vinyl ester, andepoxy resins.

Warp raw materia - 130 tex x 2

Filling raw materia - 130 tex x 1

Weave pattern - 2 x 2 twill

Fabric areal weight - 480gsm

Warp ends - 3000N / 5 cm.

Pick - 600N /5 cm

Nominal thickness - Appr. 1.7mm

Fabric width - 1000mm

Composition - 100% Bromid

CHARACTER

Self-Bonds / Self Fuses

No sticky residue or adhesive / glue

Excellent for sealing ends of sleeve

Excellent for wrapping electrical connections and splices

TEMPERATURE

500F / 260C continuous rating with weld splatter / molten metal splash protection

TYPICAL APPLICATIONS

Widely used in Metallurgy, Chemical , Motor industry and Aviation, Shipbuilding. Typically used to protect the free ends of sleeve from wicking liquids once installed on hoses or cables.

SPECS

Standard Width: 25mm, 50mm

Standard length is 50 meters, rolled

Other widthis availiable by special order.

High-temperature tube, is named oursilicon coated fiber glass sleeve, also known as fire tube, silicone rubber fiberglass casing, with the preparation of high purity e-glass fiber into a tube, and then coated with silicone in the tube wall formed by the curing treatment. after curing at -65 c - 260 c temperature range, long-term use and maintain the soft elastic properties. itself is composed of a large number ofsilicon coated fiber glass sleeve, fiber casing is coated with iron oxide red surface of silicone rubber that can withstand the molten metal splashes and a strong heat and flame, making it the protection of the environment is changing in the negativehoses, cables and tubes the ideal device.
Minus 50 ? ? ? , thesilicon coated fiber glass sleevecan maintain flexibility to withstand the continuous effect of 260 ? ? ? ; 1093 ? ? ? Under 15 to 20 minutes; 1649 ? ? ? Under 15 to under 30 seconds. sets the diameter of the length of the high temperature up to 127mm, with the best stretch factor for the cables and software bundle. it's insulation properties can provide users with efficient combustion protection against damage by heat hose, while greatly reducing heat loss. Unlimited storage life of products, can withstand oil, fuel oil and the role of hot liquid. industrial products and aerospace grade level.
Features forsilicon coated fiber glass sleeve:first: the role from molten metal splash and withstand intense radiant heat of the ability to set most suitable for high temperature harsh environment protection rubber hose, ptfe tubes, wires and cables and metal pipes.
Second: high temperature sets a high flexibility in the structure can be extended expansion.
Third: in the steam or hot oil pipeline near the pipeline operation and maintenance personnel, it is often possible burns, heat set to provide effective protection, while reducing energy loss. so the use of hot steam pipes and hot oil pipelines can be used where high-temperature units.
Synthesis of special high temperature determines the heat pipe has a number of other similar materials may be difficult to replace features: high temperature resistance, thermal insulation properties, flame retardance, electrical insulation, chemical stability, resistance to weather aging, cold, water, oil, ozone resistance, resistance, voltage, arc resistance, such as corona resistant properties, especially safety and environmental protection performance, asbestos and other hazardous products is the best alternative.