Other Products / Services #22169

fully automatic operation :- simply turning on the switch will put the burner in operation, intelligent burner controller performs all the parameter checks i.e. Flame detection, blower on, etc. In case of failure of any parameters puts the burner in lock out mode, switching off the gas supply and gives visual/audio alarm for operator attendance. On-off/hi-lo operation:- standard burner comes with on-off control which can be hooked up with automatic temperature controller/thermostat. Specially developed hi-lo system for precise control over the set point (optionaf) which can be hooked up witfl heat gen dtc 302 temperature controller (optional) is supplied as per requirementofthecustomer. Compact design :- designed to work in harsh industrial environment, with easy adaptability to most heating application. Burner and control panel are fitted-separately to avoid damages to control section, ignition transformer, etc. Due to back heat. Highly efficient :- the burner comes with adjustable. Air and gas flow control for complete combustion of fuel & to achieve tuning of burnerto various applications resulting in high efficiency. Easy maintainance :- overall construction of burner' permits an easy access to the burner components ensuring easy maintainance. Rugged constructlon:- critical components are manufactured with high grade of heat resistant stainless steel material to ensure high quality level and high working life. Burner controllers and other control components used are of high quality and, are housed in separate conirol panel for trouble free operation.lndegenious components avoid inventecy of imported costly components which in turn reduces running cost. Spares & services:- easy availability of spares & efficient before and after sales service by team of experienced and skilled personnel. Application guidance:- experienced and knowledgable team of engineers to guide &assist in burner selection for customer application.

programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise, less effect of vibration, can work in dusty conditions and extended temperature range.

HG 2003/ 1 is a fully synchronised, true three phase angle thyristor power controller for 3 wire or 4 wire resistive, transformer coupled resistive & inductive loads. The output through 3 pairs of SCR''S in inverse parallel mode gives synchronised full wave control over all the three phases. The drive accommodates all feathers like soft start, current limit & over current limit as a standard features. It is built to work in harsh industrial environment. It gives very smooth control at the set value of a PID Controller with a 0 shoot up and shoot down which saves at least 5 to 10% of energy. This unit is well suited for Ovens, Kilns, Furnaces, Plastic Injection Moulding Machines & Many More where smooth control at set value is required. As this unit is vigorously tested in our own Furnaces, it can be used blindly on any equipment.

Hydraulic Scissor lift is manually operated device, relatively cheap & easy to maintain. It is robustly constructed and it can handle quite heavy loads in confined space. It makes easy movement & handling of heavy die punches, mould and material. It reduces man efforts, man hours and man power. It totally avoids changes of accidents and increases productivity without operator fatigue.

APPLICATIONS

*Loading and Unloading of heavy material in Wearhouse
* Godowns
* Press shop
*All types of Industries

FUNCTION & OPERATING PRINCIPLE - The function of "PLASMA METAL SPRAY BOOTH" is - to provide fresh & clean air for operators. - Collecting dry over-spray of metal powder in to the washing chamber. The principle of "PLASMA METAL SPRAY BOOTH" is based on collecting (scrubbing) the dry over-sprayed powder by using centrifugal action. The dry overspread plasma spray powder is collected into tank by a down draught and forced to pass over distribution plate at a very high velocity, and subjected to a torchorous traveling path. The powder if any is carried away from working chamber by the air is subjected to pass through eliminator plates in washing chamber. The eliminators plate avoids sprayed particles depositions on blower impeller. Waterwash spray booth for handling dusts and fumes generated by Thermal Spray Processes. Unit will be designed for self exhaust and to collect particulate from the thermal spray work environment. Spray Booth will incorporate efficient water wash principle. Air will be drawn form the work area with over spray, dust and fumes into a water curtain. The exhaust air will be washed twice, once as it passes through the curtain and then again as it is scrubbed and agitated in a dense water spray created by a series of overlapping water spray nozzles. Booth exhaust air at 14000 CFM against minimum 3 " static pressure. Inlet face velocity of the booth will be 250 CFM minimum. Unit be supplied with a fan motor suitable to produce required air velocity at the booth face opening. Fan will generate a hoise level of less than 90 db. Booth will have a reinforced 10 gauge mild steel water tank with slopping bottom for complete draining and easy cleaning. The Tank will be accessible from the front of the booth for convenient clean out 1 water tank capacity will be 80 litres minimum. The washing chamber & Booth panels will be fabricated from 14 gauge mild steel sheets. Panels will have flanged sides and rolled edges with matching pre-punched slotted holes for easy bolting for assembly or disassembly. Unit will be provided with an automatic water level control system. Water when lost through evaporation will be replaced as required by an automatic fill valve. The automatic water control system will maintain full tank level at all times for proper water conditioning and recirculating cycles. Booth will be provided with a vapor proof fluorescent fixture which will facilitate two 40 watt tube lights. Electrical power for booth lighting will be supplied from main power connection of the booth. Provision of mounting head stock and tail stack Assembly. All piping including that for water supply line to booth and drain line to sewer shall be provided. Spray Booth will be supplied with Starters and Light switches and all other equipment for satisfactory functioning. Exhaust stack from spray booth to outside the building will be provided by the contractor.

Booth exhaust air at 14000 CFM against minimum 3 " static pressure
*Incorporate efficient water wash principle
*Provide fresh & clean air for operators
*Collecting dry over-spray of metal powder
*Handling dusts and fume