Kolkata, West Bengal, India
Our Products
We design and fabricate a wide variety of lances/injectors for demanding environments and challenging physical spaces.Whereas a header or spray bar is a pipe containing multiple nozzles, a lance is a pipe in which one nozzle is attached to the end of it (see photos). The lance can then be inserted into the target area. This could be a tank, a larger pipe, or a gas or fluid system. The purpose of the lance is to spray at a specific target (such as to clean a tank) or inject fluid into the system (such as gas conditioning).We can fabricate a nozzle lance to perform any spray requirement for you purpose.
Insulated, water- or steam-jacketed lances for high temperature applicationsRetractable lances to avoid process interruptionDesuperheating lances for reduction in steam volume
Shivam Process Equipment, today is a trusted name in the field of ejectors. With an experience of 20 years, our facilities have been developed to manufacture Steam Jet, Liquid Jet and Air Ejectors used in various fields.
We attribute our success to our motivated and skilled work force who can accomplish job orders of varying magnitudes and complexities. We are proud to have esteemed customers who have entrusted their faith in us over the years.
Ejector These jet mixing eductors are placed in a vessel and fed by a recirculation line. The recirculated liquid sucks in surrounding liquid from the vessel, mixes with it, and is ejected. The ejected liquid promotes futher mixing by forming a swirling flow inside the vessel.
Ejectors Six types of Ejector available to us.
Steam: These offer a range of vacuum levels using steam as the motive fluid. Single stage units are for low vacuum use, while high vacuum applications require multistage designs with intercondensers.
Steam Jet Liquid: For transporting, discharging, or heating liquid with high speed steam as the motive fluid.
Liquid: Used to suck and mix, transport, or compress fluids using high speed fluid (usually water) as the motive medium.
Air: Installed in the suction line of a water sealed vacuum pump, using atmospheric air as the motive medium.
Solid Jet Ejector: For conveying solid throught venturi effect by ejector.
Dry Polymer Jet Vacuum Ejector: For agitating dry polymer granules with water in vessel.
Ejector systems are available for producing higher vacuum levels.
Material Selection
Following types of materials are generally used.
1.Stainless steel (SS 304, SS 316, SS 316 L & all grades)2.Hardened SS
3.PVC, Nylon, Teflon
Tank Cleaning Fixed Nozzle Assembly For Fast and Powerful Cleaning of Drums and Barrels
Powerful cleaning using low flow ratesRemoves tough residues quickly and effectivelyFast cycle times clean multiple drums or barrels in minutesCompatible with a variety of pumps including pressure washers
Spray Nozzle Pattern: Flat Fan(Standard Spray or Wide Angle and Narrow Angle), Solid Cone/Full Cone, Hollow Cone, Spiral Cone (Full Cone and Hollow Cone), Fog Misting, Plastic Nozzles.
We present high quality Irrigation Sprinkler System at highly reasonable rates. Water is distributed through a system of pipes usually by pumping and sprayed in the air and irrigate entire soil surface through spray heads to break up in small water drops that falls on the ground. Sprinklers cover irrigation of the small and large areas. Moreover, It is also adaptable to irrigable soils due to the availablility of sprinklers in broad range of discharge capacity. Sprinkler Irrigation is a method similar to rainfall when used. We provide an Irrigation Sprinkler System to the clients as per the requirements within stipulated time frame.
Attributes:
Maximum water savingCombining high qualityAffordabilityEasy installationHigh strengthChemical resistance engineering metalFunctional satisfactionCost effective
Fine full cone spray pattern from a cluster of nozzles with large capacity flow relatively small particle size.
Application :* Gas colling, desuperheaters* Fire protection* Chlorine precipitation, absorption* Chemical process
Materials - These nozzles are available in SS & brass.
We offer a wide spectrum of industrial and air conditioning cooling towers spray nozzles that are popular amongst our clients owing to their flow rates, sizes, spray angles and performances. Our range of spray nozzles are fabricated using brass, nylon, pp, pvc and stainless steel 304. Hollow cone jet sprays are one of the commonly offered spray nozzles types that are designed with a replaceable orifice cap and are of non-clogging types.
Shivam Process Equipment, today is a trusted name in the field of tank eductor. With an experience of 20 years, our facilities have been developed to manufacture tank eductors used in various fields.
We attribute our success to our motivated and skilled work force who can accomplish job orders of varying magnitudes and complexities. We are proud to have esteemed customers who have entrusted their faith in us over the years.
Eductors These jet mixing eductors are placed in a vessel and fed by a recirculation line. The recirculated liquid sucks in surrounding liquid from the vessel, mixes with it, and is ejected. The ejected liquid promotes futher mixing by forming a swirling flow inside the vessel by venturi process.
Material Selection
Following types of materials are generally used.
1.Stainless steel (SS 304, SS 316, SS 316 L & all grades)2.Hardened EN8
Gravity feed GunsSuction feed GunsAir Blow Guns and WashingLubricating and Protective Coating Guns.
Material Selection
Following types of materials are generally used.
Stainless steel (SS 304, SS 316, SS 316 L & all grades)
Cluster Head multiple spray full cone nozzles produce a cloud of consistently sized fine droplets. These multi-orifice nozzles produce a finer spray than a standard full cone, single orifice nozzle working at the same pressure and delivering the same quantity of liquid.Typical Applications Gas cooling, fire suppression, dust suppression.
CONTINOUS CASTING COOLING FULL CONE NOZZLEThis type spray Nozzle the supply of liquid takes palce arially and form fine. Uniform full cone spray pattern.
Application :* Spray Drying* Brine Spraying* Metal Treating* Cooling & Cleaning of air and gas.
The nozzle tips of Dovetail Type are usually mounted onto a pipe by means of a welded nipple and secured in place by a locknut. They can be easily be replaced with the assurance that the linear spray will be in the correct position because the dovetail maintains the correct orientation.
High Impact Nozzle
Flat, high impact, sharply defined spray pattern without heavy edges. This type of high velocity spray is excellent for cleaning applications. Spray angles of 15, 25, 40, 50, 65, 80, 95 and 110 degrees are available.
Materials - These nozzles are available in SS & brass.
Features:High impact spray, high cooling performance and energy-saving mist cooling nozzle.Large turn-down ratio of 1: 20 and minimal variation in spray angle. (DOVEA series)Large free passage diameter for minimal clogging.
Advantages:Slab continuous castingBloom continuous castingBillet castingCooling for continuous casting rollersCooling for hot mill rollersContinuous annealing equipment
