4/3/2 Way Suction Collection Head

Consist of 4/3/2 nos. 63mm Size (GM) Male Instantaneous coupling as per IS: 903 with NRV

• Deluge Valve Model A
• Fast application of water in spray, pre-action and foam system
• Size: 50, 80, 100, 150 & 200 mm (2", 3", 4", 6" & 8")
• Cast Iron construction
• Maximum service pressure 12 bar (175 psi)
• Vertical inlet and Horizontal outlet
• Bronze Seat
• Flanged connection dimensions to ANSI B 16.1
• No latch, no piston, no hinges
• Simple yet rugged
• Diaphragm operated with rubber to metal drip-tight positive sealing
• Reset without any tools
• Service without removal from line
• Easily trimmed for actuation by manual, remote solenoid valve & with wet or dry pilot
• Internal and external surfaces epoxy coated for extra protection
• The Deluge Valves are also available as pre-assembled cabinet/skid mounted, upon request
• UL Listed

• Fiber glass tank of capacity 160 litres in yellow finish, Optional construction Carbon Steel or Stainless Steel tank of capacity upto 220 litres
• Two solid rubber wheels for easy maneuver by one person Mounted with aluminium or bronze inductor of capacity 225 / 450 lpm (60 / 120 gpm) and branch pipe
• Provision for mounting two fire hoses

• Vertical or Horizontal unit
• Maximum working pressure 12 Bar (175 PSI)
• Carbon Steel or Stainless Steel Construction
• Tank made to ASME Code Section VIII Div I
• ASME U Stamp available as an option
• Capacity up to 15, 000 liters (4000 gal.)
• Compatible with all foam concentrates
• Nylon reinforced Buna-n-rubber bladder
• Proportioner pre-piped on to the tank
• Bladder Tank filling kit provided if required
• UL Listed

• Horizontal unit
• Made up to 15000 liter (4000 Gal) Storage capacity
• Stainless Steel 304/316 material
• Comes with ladder, sight glass and air vent
• Expansion dome of 2% tank capacity
• Flat end or dome end
• Natural, Custom or Red RAL 3000 epoxy painted
• Tank can be custom made with inline inductor mounted on the tank

AFFF is Aqueous Film Forming Foam concentrate (AFFF) has characteristic of film forming, due to which flame is rapidly knocked down and sealing of fuel surface is effectively achieved. AFFF is formulated with Fluorinated surfactants, hydrocarbon surfactants and stabilisers to give best performance and long shelf life. Due to presence of Fluorocarbon surfactant the foam has a positive spreading coefficient on the surface of the fuel, giving fast coverage and thereby helping the fire fighters in saving precious time. AFFF can be used with fresh or sea water. AFFF is available as 3% and 6% Foam Concentrate.

FP is mainly based on protein material, which gives good sealing and excellent burn back resistance. However the spreading of the foam is slow. This limitation is overcome by incorporating fluorinated surfactant in the formulation; without affecting heat stability. FP is formulated with hydrolysed protein, fluorochemicals, metal salts, special stabilizers and preservatives to give the best performance and satisfactory storage. It is highly reliable, cost effective and efficient on massive hydro-carbon fires. It gives resistance to fuel pick-up and is suitable for sub-surface applications. FP is suitable for long pre-burn fires on petroleum tank farm fires, oil jetties, refineries and offshore oil platforms. FP is available as 3% and 6% Foam Concentrate.

• Flexible Sprinkler Connections
• Complete unit, a corrugated stainless steel flexible with nipple, reducer, Bar and brackets, which are fitted to the ceiling tile support rails to locate and secure the sprinkler in the correct position
• Sizes: 800MM, 1000MM, 1200MM, 1500MM
• Max Service Pressure - 12 Bar
• Material flexible - Stainless Steel
• Support Brackets, Inlet/Outlet Connectors and Square Bar - Mild steel, zinc plated
• UL Listed

• Ductile Iron material to ASTM - A536
• Flanged x Flanged, Grooved x Grooved and Grooved x Flanged available
• Rated for maximum 17.5 Bar (250 PSI) operating pressure
• Size: 80, 100, 150 and 200 NB
• Variable Pressure Trim with Retard Chamber and Water Motor Gong
• Constant Pressure Trim available as an option
• Epoxy painted internally & externally
• UL Listed and FM Approved

• Hydraulically operated mechanical bell used along with fire protection system valves
• Corrosion resistant Aluminium alloy material, epoxy coated all over
• Wall mounted or direct online mounting type
• UL Listed and FM Approved

• Brass construction for Model MV-A and MV-AS
• Stainless Steel construction for Model MV-B and MV-BS
• Aluminium Bronze construction for Model MV-E
• Size 1/2" BSPT or NPT
• Open orifice design used in deluge water spray system
• Non-automatic fixed pattern, external deflector
• Solid cone discharge
• Several combination of different orifice sizes & spray angles
• K-factor(Metric) - 18, 22, 30, 35, 41, 51, 64, 79, 91 & 102
• K-factor(US) - 1.26, 1.54, 2.10, 2.45, 2.87, 3.57, 4.48, 5.53, 6.37 & 7.14
• Spray angle - 65⁰, 80⁰, 90⁰, 100⁰, 110⁰, 120⁰ & 140⁰
• Each Nozzle body permanently marked with model number, batch number, spray angle, K-factor & UL mark
• Finish - Brass, Bright Nickel Chrome or Natural Finish
• Approvals - UL Listed and FM Approved
• FM Approved Blow - Off Plug

Environmental Specifications :

• NEMA 4/IP54
• Temperature Range: 40F - 120F, (4.5C - 49C) - UL
• Non-corrosive sleeve factory installed in saddle

Approval UL Listed, FM Approved.

Micro Controller Based 2 Zone Fire Alarm Panel Expandable Up to 4 Zones. Compact design good looking Panel.

Features :

• Fully Confirm IS 2189
• Zone Wise fire fault LED Indication.
• Zone Isolation Facility
• Mains on, System On, Charger on, visual indications.
• Auto dialler attachable facility
• External S/w for Reset, Silence, Lamp test.
• External s/w to test each zone fire, open, short status manually.
• Inbuilt Buzzer
• 16 2 Line LCD Display.
• Inbuilt Battery Charger & Battery Space.
• Operates on 230 VAC, 50 Hz AC supply.
• Potential Free Contact Facility

Features :

• New attractive look with zone wise LED & LCD indication.
• Two mode selection facility (Auto/Manual) with cross zoning
• Gas Inhibition and instant release facility.
• Feather touch switched for auto/manual mode selection, manual release, manual abort, disable operations.
• Inbuilt battery charger & battery space facility.
• Up / Down switch for delay time setting.
• SOV line monitoring facility and line status through LED display.
• 7 - segment display for discharged delay time setting.
• Key lock for enabling and disbling of control switches.
• Common fire, fault and pre - discharge potential free contacts.

Features :

• Customised talk back master station.
• Used for two way communication.
• Simplex type talk back with connectivity.
• 5 to 50 zone expandable.
• Simple operation (Press to talk facilities).
• Talk back panel as per IS standards.
• Best used in multistoried building.

Features :

• Easy to operate
• Maintenance free
• Longer working life
• High performance

Features :

• DOL Starter
• Star - Delta starter
• Auto - Transformer starter
• Soft Starter
• Three phase and single phase starter available
• Easy installation and connections
• Operational voltage - 415 V.
• Wall mounting / Floor mounting available

Doors are approved from central building research institute (CBRI Roorkee)120 Minuts Rated Composite Wooden Fire / Smoke Check Door
Door Frame :

Wooden door frame of hard wood / teak wood of section 120 mm 70 mm with heat activated intumescent fire stip of section 15mm 4mm and one coat of fire and anti-termite primer.

Door Shutter :

50mm thick asbestos free composite fire / smoke check wooden shutters of 120 minutes fire resistance rating comprising of two 12mm thick calcium silicate board sandwiching 25mm thick proprietary fire resistance insulation material faced with 3mm thick commercial ply facing on bath sides with heat activated intumescent fire seal strip size 15mm 4mm mounted in the grooves on three sides except bottom and one coat of anit - termite fire retardant primer.

Steel Doors are approved from department of Industries & Commerce, Bahadurgarh (Haryana) 60 / 120 Minutes Fire Rated Steel Door

46mm thick steel fire door of 60 / 120 minutes fire rating fabricating with 2 no. 18SWG galvanized steel sheet sandwiching with proprietary fire resistant insulation material in between. The door frames are manufactured from 16SWG galvanized steel sheet. Pressed form to double reabate profile of size 143mm 57mm. The door frame and door shutter are fitted with SS ball bearing Hinges (extra cost) and are coated with one coat of fire and corrosion resistant primer.

4/3/2 Way Suction Collection Head

Consist of 4/3/2 nos. 63mm Size (GM) Male Instantaneous coupling as per IS: 903 with NRV

• Deluge Valve Model A
• Fast application of water in spray, pre-action and foam system
• Size: 50, 80, 100, 150 & 200 mm (2", 3", 4", 6" & 8")
• Cast Iron construction
• Maximum service pressure 12 bar (175 psi)
• Vertical inlet and Horizontal outlet
• Bronze Seat
• Flanged connection dimensions to ANSI B 16.1
• No latch, no piston, no hinges
• Simple yet rugged
• Diaphragm operated with rubber to metal drip-tight positive sealing
• Reset without any tools
• Service without removal from line
• Easily trimmed for actuation by manual, remote solenoid valve & with wet or dry pilot
• Internal and external surfaces epoxy coated for extra protection
• The Deluge Valves are also available as pre-assembled cabinet/skid mounted, upon request
• UL Listed

• Fiber glass tank of capacity 160 litres in yellow finish, Optional construction Carbon Steel or Stainless Steel tank of capacity upto 220 litres
• Two solid rubber wheels for easy maneuver by one person Mounted with aluminium or bronze inductor of capacity 225 / 450 lpm (60 / 120 gpm) and branch pipe
• Provision for mounting two fire hoses

• Vertical or Horizontal unit
• Maximum working pressure 12 Bar (175 PSI)
• Carbon Steel or Stainless Steel Construction
• Tank made to ASME Code Section VIII Div I
• ASME U Stamp available as an option
• Capacity up to 15, 000 liters (4000 gal.)
• Compatible with all foam concentrates
• Nylon reinforced Buna-n-rubber bladder
• Proportioner pre-piped on to the tank
• Bladder Tank filling kit provided if required
• UL Listed

• Horizontal unit
• Made up to 15000 liter (4000 Gal) Storage capacity
• Stainless Steel 304/316 material
• Comes with ladder, sight glass and air vent
• Expansion dome of 2% tank capacity
• Flat end or dome end
• Natural, Custom or Red RAL 3000 epoxy painted
• Tank can be custom made with inline inductor mounted on the tank

AFFF is Aqueous Film Forming Foam concentrate (AFFF) has characteristic of film forming, due to which flame is rapidly knocked down and sealing of fuel surface is effectively achieved. AFFF is formulated with Fluorinated surfactants, hydrocarbon surfactants and stabilisers to give best performance and long shelf life. Due to presence of Fluorocarbon surfactant the foam has a positive spreading coefficient on the surface of the fuel, giving fast coverage and thereby helping the fire fighters in saving precious time. AFFF can be used with fresh or sea water. AFFF is available as 3% and 6% Foam Concentrate.

FP is mainly based on protein material, which gives good sealing and excellent burn back resistance. However the spreading of the foam is slow. This limitation is overcome by incorporating fluorinated surfactant in the formulation; without affecting heat stability. FP is formulated with hydrolysed protein, fluorochemicals, metal salts, special stabilizers and preservatives to give the best performance and satisfactory storage. It is highly reliable, cost effective and efficient on massive hydro-carbon fires. It gives resistance to fuel pick-up and is suitable for sub-surface applications. FP is suitable for long pre-burn fires on petroleum tank farm fires, oil jetties, refineries and offshore oil platforms. FP is available as 3% and 6% Foam Concentrate.

• Flexible Sprinkler Connections
• Complete unit, a corrugated stainless steel flexible with nipple, reducer, Bar and brackets, which are fitted to the ceiling tile support rails to locate and secure the sprinkler in the correct position
• Sizes: 800MM, 1000MM, 1200MM, 1500MM
• Max Service Pressure - 12 Bar
• Material flexible - Stainless Steel
• Support Brackets, Inlet/Outlet Connectors and Square Bar - Mild steel, zinc plated
• UL Listed

• Ductile Iron material to ASTM - A536
• Flanged x Flanged, Grooved x Grooved and Grooved x Flanged available
• Rated for maximum 17.5 Bar (250 PSI) operating pressure
• Size: 80, 100, 150 and 200 NB
• Variable Pressure Trim with Retard Chamber and Water Motor Gong
• Constant Pressure Trim available as an option
• Epoxy painted internally & externally
• UL Listed and FM Approved

• Hydraulically operated mechanical bell used along with fire protection system valves
• Corrosion resistant Aluminium alloy material, epoxy coated all over
• Wall mounted or direct online mounting type
• UL Listed and FM Approved

• Brass construction for Model MV-A and MV-AS
• Stainless Steel construction for Model MV-B and MV-BS
• Aluminium Bronze construction for Model MV-E
• Size 1/2" BSPT or NPT
• Open orifice design used in deluge water spray system
• Non-automatic fixed pattern, external deflector
• Solid cone discharge
• Several combination of different orifice sizes & spray angles
• K-factor(Metric) - 18, 22, 30, 35, 41, 51, 64, 79, 91 & 102
• K-factor(US) - 1.26, 1.54, 2.10, 2.45, 2.87, 3.57, 4.48, 5.53, 6.37 & 7.14
• Spray angle - 65⁰, 80⁰, 90⁰, 100⁰, 110⁰, 120⁰ & 140⁰
• Each Nozzle body permanently marked with model number, batch number, spray angle, K-factor & UL mark
• Finish - Brass, Bright Nickel Chrome or Natural Finish
• Approvals - UL Listed and FM Approved
• FM Approved Blow - Off Plug

Environmental Specifications :

• NEMA 4/IP54
• Temperature Range: 40F - 120F, (4.5C - 49C) - UL
• Non-corrosive sleeve factory installed in saddle

Approval UL Listed, FM Approved.

Micro Controller Based 2 Zone Fire Alarm Panel Expandable Up to 4 Zones. Compact design good looking Panel.

Features :

• Fully Confirm IS 2189
• Zone Wise fire fault LED Indication.
• Zone Isolation Facility
• Mains on, System On, Charger on, visual indications.
• Auto dialler attachable facility
• External S/w for Reset, Silence, Lamp test.
• External s/w to test each zone fire, open, short status manually.
• Inbuilt Buzzer
• 16 2 Line LCD Display.
• Inbuilt Battery Charger & Battery Space.
• Operates on 230 VAC, 50 Hz AC supply.
• Potential Free Contact Facility

Features :

• New attractive look with zone wise LED & LCD indication.
• Two mode selection facility (Auto/Manual) with cross zoning
• Gas Inhibition and instant release facility.
• Feather touch switched for auto/manual mode selection, manual release, manual abort, disable operations.
• Inbuilt battery charger & battery space facility.
• Up / Down switch for delay time setting.
• SOV line monitoring facility and line status through LED display.
• 7 - segment display for discharged delay time setting.
• Key lock for enabling and disbling of control switches.
• Common fire, fault and pre - discharge potential free contacts.

Features :

• Customised talk back master station.
• Used for two way communication.
• Simplex type talk back with connectivity.
• 5 to 50 zone expandable.
• Simple operation (Press to talk facilities).
• Talk back panel as per IS standards.
• Best used in multistoried building.

Features :

• Easy to operate
• Maintenance free
• Longer working life
• High performance

Features :

• DOL Starter
• Star - Delta starter
• Auto - Transformer starter
• Soft Starter
• Three phase and single phase starter available
• Easy installation and connections
• Operational voltage - 415 V.
• Wall mounting / Floor mounting available

Doors are approved from central building research institute (CBRI Roorkee)120 Minuts Rated Composite Wooden Fire / Smoke Check Door
Door Frame :

Wooden door frame of hard wood / teak wood of section 120 mm 70 mm with heat activated intumescent fire stip of section 15mm 4mm and one coat of fire and anti-termite primer.

Door Shutter :

50mm thick asbestos free composite fire / smoke check wooden shutters of 120 minutes fire resistance rating comprising of two 12mm thick calcium silicate board sandwiching 25mm thick proprietary fire resistance insulation material faced with 3mm thick commercial ply facing on bath sides with heat activated intumescent fire seal strip size 15mm 4mm mounted in the grooves on three sides except bottom and one coat of anit - termite fire retardant primer.

Steel Doors are approved from department of Industries & Commerce, Bahadurgarh (Haryana) 60 / 120 Minutes Fire Rated Steel Door

46mm thick steel fire door of 60 / 120 minutes fire rating fabricating with 2 no. 18SWG galvanized steel sheet sandwiching with proprietary fire resistant insulation material in between. The door frames are manufactured from 16SWG galvanized steel sheet. Pressed form to double reabate profile of size 143mm 57mm. The door frame and door shutter are fitted with SS ball bearing Hinges (extra cost) and are coated with one coat of fire and corrosion resistant primer.