Kolkata, West bengal, India
Our Products
| Sr. No. | Width (mm) | Height (mm) | Thickness (mm) |
| 1 | 50 | 25/50/100 | 1.6/2 |
| 2 | 75 | 25/50/100 | 1.6/2 |
| 3 | 100 | 25/50/100 | 1.6/2 |
| 4 | 150 | 25/50/100 | 1.6/2 |
| 5 | 200 | 25/50/100 | 1.6/2 |
| 6 | 300 | 25/50/100 | 1.6/2 |
| 7 | 400 | 25/50/100 | 1.6/2 |
| 8 | 500 | 25/50/100 | 1.6/2 |
| 9 | 600 | 25/50/100 | 1.6/2 |
| Product | Wrapping type | Wrapping layers |
Insulation Thickness | Breakdown voltage |
| NOMEX Paper Covered Insulated Aluminum Wires and Strips |
Self lock type overlap joint 1.5–2mm | 1 | 0.12±0.03 | 600V |
| Self lock type overlap joint 1.5–2mm | 2 | 0.24±0.03 | 1500V | |
| Half lapped tapping | 1 | 0.22±0.03 | 1200V | |
| Half lapped tapping | 2 | 0.40±0.03 | 3000V | |
| Inopposite directions, lap wrap 1.5mm | 3 | 0.33±0.03 | 2500V |
| Item | Specification | Application |
| Nomax Covered Round and Rectangular Copper / Aluminium Conductors | BIS 11174 – 1984 (Temperature Index 220ºC) | UPS Systems Winding of Transformers |
| Paper Covered Round and Rectangular Copper Conductors | BIS 7404 PartI and II (Temperature Index 90º & 105º) | Winding of Transformers |
| Cotton Covered Round and Rectangular Copper / Aluminum Conductors | BIS 7391 Part I & II (Temperature Index 90º) | Winding of dry type transformers |
| Bare Round and Rectangular Copper / Aluminium Conductors | BIS 6160, BIS 1897 | Winding coils of Electric Machines |
| Paper Covered Round and Rectangular Aluminium Conductors | BIS 6161 Part I & II (Temperature Index 90º & 105º) | Winding of Transformers |
| Nomax / Paper / Cotton Insulated Twin / Triple / Bunched round and Rectangular Copper and Aluminium Conductors | manufactured as per customer specifications. | Special type transformers, Electrical Machines. |
90/10 Cupro Nickel Wire Chemical Composition
| Cu-Ni 90/10 | Cu | Pb | Mn | Fe | Zn | Ni |
| 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
| STANDARD | UNS | WERKSTOFF NR. |
| Cupro Nickel 90/10 | C70600 | 2.0872 |
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
| TYPE | SHAPE | APPLICATION | GRADE | SPECIFICATION | API CLASS |
| 1 – A | Plate | Plates for minor secondary steel in top side, deck plating, toe plates, coaming angles, etc. Building Wall, Building Floor and Roofing. Plates *grating (from cellar Deck & upwards) | 250 | ASTM – A 36 / IS 2062:E250 Quality – B/C |
C |
| 1 – B | Plate | Plates for rolling tubular for secondary steelwork, Stiffeners. Plates for profiling for building module | 250 | ASTM – A –36 / IS 2062 E250 Quality – C |
C |
| 1– C | Rolled section | Steel sections with a depth up to 300 mm and used as secondary members. (Including angles, channels, etc.). | 250 | ASTM – A –36 / IS 2062 E250 Quality – C |
C |
| 1 –D | Tubular | Seamless tubular up to 406 mm (16″) diameter for substructure braces, truss braces and chords for substructure and topside deck, bridge braces. *handrail & ladders (from cellar deck & upwards) |
250 | API-5L-Grade B/ ASTM-A-106 Grade B |
B/C |
| 2 – B | Plates | Non-through thickness applications less than 75 mm thick involving tubular above 406 mm diameter for primary steel throughout the structure, like Jacket legs/skirt sleeves, Deck truss, Deck legs other than joint cans, barge bumpers and helpdesk plating, plate girder, shim plates, bridge braces, Stiffeners, etc. | 350 | ASTM-A-131-DH36 / EN 10025- S355-J2G3 |
A |
| 2 –C | Rolled Section | For applications of Primary and major secondary steelwork where rolled sections are to be used with a depth above 300 mm | 350 | ASTM-131-AH36 EN 10025- S355-J0G2 |
B |
| P | Bi | Sb | As | Fe | Ni | Pb | Sn | S | Zn | O | |
| ≥99.97 | 0.0001 | 0.001 | 0.002 | 0.002 | 0.005 | 0.002 | 0.003 | 0.002 | 0.002 | 0.002 | 0.001 |
Resistivity of Copper Bus Bar (Shaped Copper Bus Bar):
| DC Resistivity ( Ω. Mm 2 / m) | Conductivity (% IACS) | |
| TTRYTR | ≤ 0.017241 | ≤100 |
| TTYYTY | ≤ 0.01777 | ≤97 |
| Height | Height Tolerance | Sole Edge | Sole Edge Tolerance |
| H≤ 10.0 | -0.10 | T≤ 3.00 | -0.04 |
| 10.0 < H ≤ 18.0 | -0.20 | 3.00< H ≤ 6.00 | -0.05 |
| 18.0 | -0.30 | 6.00 < H ≤ 10.00 | -0.06 |
| 30.0 | -0.60 | 10.00 < H ≤ 18.00 | -0.07 |
| 50.0 | -0.80 | 18.00 < H≤ 24.00 | -0.08 |
| 80.0 | -1.00 |
| Thickness | Weight | |
| Inches | Millimeters | Pounds/Square Foot |
| 0.0156 | 0.369 | 1 |
| 0.0312 | 0.792 | 2 |
| 0.0625 | 1.550 | 4 |
| 0.1250 | 3.180 | 8 |
| 0.2500 | 6.350 | 16 |
| 0.5000 | 12.700 | 30 |
| Mg | Mn | Si | Cu | Fe | Cr | Zn | Ti | Cu | Other (Each) | Others (Total) | Al |
| 2.60 – 3.60 | 0.0 – 0.50 | 0.0 – 0.40 | 0.0 – 0.40 | 0.0 – 0.30 | 0.0 – 0.20 | 0.0 – 0.15 | 0.0 – 0.10 | 0.0 – 0.05 | 0.0 – 0.05 | 0.0 – 0.15 | Balance |
| Proof Stress | Tensile Strength | Elongation at 50 mm | Hardness Brinell |
| 80 Min MPa | 190 – 260MPa | 12 Min % | 52 HB |
| Minimum Thickness | Minimum Width | Maximum Width | ||
| 1.60 | 6.35 | 127.0 | ||
| Minimum Thickness | Minimum Width | Maximum Width | ||
| 50.80 | 76.20 | 127.0 | ||
(%max., unless shown as range or min.)
| Cu | Fe | Pb | Zn | |
| Min./Max. | 89.0-91.0 | .05 | .05 | Rem. |
| Nominal | 90.0 | – | – | 10.0 |
| Shree Metal Bronze Sheet Sizes | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Shree Metal Bronze Sheet Thickness | 0.1mm to 100 mm Thk |
| Shree Metal Bronze Sheet Width | 10-2500mm |
| Shree Metal Bronze Sheet Length | 2m, 2.44m, 3m, or as required |
| Shree Metal Bronze Sheet Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Shree Metal Bronze Sheet Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard Sheet suppliers |
| Shree Metal Bronze Plate Stock in form of | Shree Metal Industries Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, decaled, sheared, tread plate, Checker Plate |
| Shree Metal Bronze profiling | To provide a full profiling service we use numerous profiling methods including:
|
| Specialized in |
|
| We offer a comprehensive menu of services designed to add value to your project: plasma cutting, water jet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. | |
