We fabricate Attritor Mills which are also known as Stirred Mills and are manufactured from superior grade steel that incorporates high efficiency in the machine. These are used in grinding and blending process for wet or dry materials. Our product range is equipped with a top cover that can be used to lock the main vessel with following features:

• Attritor mills are compartmentalized into two halves i.e. mild steel jacket which is used as coolant and an entire M.S Inlet, outlet and drain fitting
• Specifically designed stainless steel ball valve and strainers provide corrosion resistance and       make these easily cleanable equipment
• In addition, these also have optional recirculation facility

we offer Boiler Chimney.Manufacturing optimum quality Industrial Boiler Chimney is our specialty. We, at Western Conveyor Projects, are a prominent organization engaged in designing, engineering, installing, and supplying Boiler Chimney in regular as well as irregular sizes. Nevertheless

PVS Ice Crusher also used for dairy industries for crusher ice to maintain temperature. quality parameters for manufacturing, and observes strict quality inspection and random checking of parts and functioning. The Company is committed to achieve the highest standards in engineering excellence by introducing and marketing superior quality products to fulfill most Indian and international manufacturing standards.

Flexible screw conveyor Available in different sizes start from 150 mm dia to 600 dia in different length and different construction of material like, M.S S.S etc. These could be used either horizontally or up to an inclination of 45 degree or so.

We manufacture and supply premium quality High Speed Stirrer which are made from best quality materials which offer, long life and sturdy structure to it. These High Speed Stirrer can handle variable speeds and torque without any compromise in the quality or quantity of the operations. This cost effective and high performing stirrer have placed us among the topnotch High Speed Stirrer manufacturers and suppliers.

Type:

MS fabricated mast with horizontal support beam at its top.

Drive:

Flameproof or non flameproof Electric Motor , 440 Volt, 3 Phase

Stirrer Shaf:

Thoroughly ground in SS304 steel

Application Industry:

Paint , Food, Ink, Food, Dairy

Special Features:

• Variable speed drives to take care of the varying torque.
• SS Jacketed and Non Jacketed Vessels.
• Upward and Lowering mechanism using Hydraulic power packs.

a good range of batch type ball mills to crush even the hardest material like, quartz, topaz , ceramics, sillica etc. Different types & material of liners & grinding media like, hyper steel, stainless steel, mn. Steel, ceramic etc. May be selected to suit the material.

models available :

2 hp to 100 hp and above 5 kg to 10 tons capacity direct gear drive , counter gear for load reduction.

construction :

ms + ms / ss coating + ss + jacketed.

ideal for:

• pigment colors
• minerals & ores
• chemicals technical products
• dyestuffs
• fertilizer
• insecticides / pesticides

Where a fine blending or mixing of material, with uniform output is required Ribbon Blenders are the best. The equipment is also suitable to mix a small quantity of liquids to powder stocks. Offers you dust free operation, compact and excellent appearance. This low operative cost equipment is available with the sizes varying from a tiny lab model to 10000 litre. The design of the equipment also makes suitable to dry stage reaction for the application such as starch, gum and cellulose derivatives. These blenders are also available with all contact parts of Stainless Steel.

Construction :

M.S. / M.S. - S.S Coating / S.S / Jacket Ribbon Blender

Models Available :

• MS Blender
• MS. SS Coating Blender
• Jacket Blender
• Till Till Blender

Ideal For:

• Mineral & Others
• Chemical Technical Products
• Dyestuffs
• Pigments Colours
• Fertilisers
• Metal Separation
• Insecticides / Pesticides

Available in different sizes start from 150 mm dia to 600 dia in different length and different construction of material like, M.S / S.S etc. These could be used either horizontally or up to an inclination of 45 degree or so.

We pride ourselves on being a premier fabricator of specialty vessels. Our design and manufacturing staff works closely with our customers to develop engineering specifications for process equipment customized to the specific industry applications.

We manufacture Steel Chemical Reactor Vessels that are made using various grades of stainless steel SS304 and SS316. These vessels are mainly used in chemical and pharmaceutical industry. Our manufacturing range is from 0.5 kl to 20 kl capacity.

We are one of the prominent manufacturers and exporters of Save Machine. These are developed using quality material and are at par with the international quality standards. Our range is acknowledged for features like low maintenance, high performance, durability and easy installation.

We are one of the prominent manufacturers and exporters of Dal Polisher. These are developed using quality material and are at par with the international quality standards. Our range is acknowledged for features like low maintenance, high performance, durability and easy installation.

We manufacture and export an extensive range of Bead Mill, which is fabricated using high grade raw material to ensure optimum quality in the end product. Our bead mill assist in sending the power of the main motors to the grinding beads
and is provided with well built agitator disc. This further, enables to break solid matters into grounded form. Thus, our Bead Mills are highly appreciated for low power consumption, high performance and fine milling effect.

We are one of the prominent manufacturers, suppliers and exporters of Industrial Heaters and Steam Boilers. These are developed using quality material and are at par with the international quality standards. Our range is acknowledged for features like low maintenance, high performance, durability and easy installation.

It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

it is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.

Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved

Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.

The heat source for evaporation may be low pressure steam or surplus heat steam.

The heat loss is less.

Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP.

It belongs to static vacuum freeze dryer. So the shape of raw material to be dried should not be destroyed.

Available in different sizes start from 150 mm dia to 600 dia in different length and different construction of material like, M.S / S.S etc. These could be used either horizontally or up to an inclination of 45 degree or so.

Our mass mixtures have been designed with latest technology to facilitate through mixing of door damp materials and suitable for tablet granulation. These mass mixtures are available in capacity of 50 kgs, 100 kgs and 200 kgs with over flow capacity of 110 liters, 220 liters and 440 liters. We use high grade raw material and ensure that we provide defect freed mass mixture to our clients.

• Motor: 440 V/ 3 HP 50 Hz/ A 440 V/ 5HP 5 Hz/ AC 440 V/ 7.5 HP 50 Hz/ AC

Manufacturing optimum quality Industrial Boiler Chimney is our specialty. We, at Western Conveyor Projects, are a prominent organization engaged in designing, engineering, installing, and supplying Boiler Chimney in regular as well as irregular sizes. Nevertheless, we are recognized as one of the most.

SZF Series linear vibration screen is low consuming, high output, simple sturcture, easy maintain, no powder dispersed, automobile discharged. It is very useful in building industries, fertilizer, perlite and so on. We can be supplied of different sizes depending upon your required.

These screening machines can be used universally for test screening or to produce between 2 and 4 screen fractions. A good screening effect is achieved by the circular vibration in the vertical plane.

Vibration screens are very useful in plastics, rubber, ceramic, food, pharmaceutical, chemical, fertilizer, glass industries. Vibratory screens can be provided with dust proof cover as required. Vibrating screen can be supplied of different sizes depending upon capacity required. They can also handle slightly wet material.

PVS Ice Crusheralso used for dairy industries for crusher ice to maintain temperature.

We are one of the prominent manufacturers and exporters of Industrial Oil Tank. These are developed using quality material and are at par with the international quality standards. Our range is acknowledged for features like low maintenance, high performance, durability and easy installation.

Medical disposables destroyer, model FSD-8A

Function:comprehensive destroying of medical waste including syringe, infusion set, infusion bottle, infusion set needle, blood bag, vessel, speculum, test tube, microtiter plate, culture dish, dilution cup, syringe tips, uterine neck simpler, etc.

Waste container:

• 360*270*210mm
• Electricity leakage protecting
• Over heat protecting
• Overload protecting
• Operating inferface low voltage (Save voltage) protecting
• Error automatic promoting
• No flash over or puncture in pressure proof testing
• Stable running, no struck in normal breaking.
• Multi-class rolling and cutting to break, which is with high efficiency and no noise
• The whole breaking process is in closed condition, no furnace dust, to pollution to the working nvironment

Hydrolift Destoner Series 4000, all S/S, hydrolift, destoner, rinser rated up to 25, 000 lbs @ hour depending upon application. Is a (2) function operation 1st to rinse product and remove sand, stone, or any other non-floatable materials, and 2nd to elevate product using a vertical auger which creates constant speed and water turbulance.

Has a 24" L x 48" W x 24" D, S/S recieving hopper and a 14" dia auger on 2 1/2" dia shaft, 14" x 14" discharge port with 102" discharge height, 10" L x 5-1/2" W clean out chute and (2) 4-1/2" dia tri-clover in/outlet ports. OAD: 52" L x 52" W x138" H