We are engaged in offering a wide range of Flash Mixer that is fabricated by using quality-tested material bases that is sourced from reliable vendors of the market. Specifically designed and fabricated for the process requirement of water and wastewater treatment. The design of Flash mixer water treatment plants ensures efficient, minimum energy consumption and long life. These are available in various designs and models and can be customized as per the details provided by the client. The entire range of Flash Mixer delivered by us is highly acknowledge for their durability, reliability, accurate finish, precision engineered and optimum performance.

• The mechanism would be of centrally driven type with fixed full bridge spanning the tank diameter.
• Bridge consists of necessary walkway with handrails to access drive unit at the centre.
• Drive unit consisting of Drive head (Worm shaft & worm gear) connected to Gear Box by Chain & sprockets and the Gear box connected to Motor by Love joy Coupling.
• Main Vertical solid inserted into the Drive head gear bore and keys locked, suspend-ed freely, flange facing downwards.
• An intermediate Scraper arm shaft made out of Heavy duty pipes suspended from the vertical shaft.
• Suitable diameter of Influent well made out of MS or FRP fixed in Bridge bottom for Feed entry.
• Two Scraper arms, rigidly fabricated to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes.
• Two Stub arms provided to sweep the core sludge area at the centre and also to provide brace supports to the main Scraper arms.
• Suitable Central Sludge well scraper.

• The mechanism would be of centrally driven type with fixed half bridge spanning the tank radius. One end over the tank wall and other over a Centre mechanism cum turn table in the Centre pier.
• Bridge consists of necessary walkway with handrails to access drive unit at the centre.
• Centre mechanism Internal gear worm drive type turn table resting over a base frame on the RCC centre pier.
• Drive unit consisting of Centre mechanism with internal gears through which the Scraper Cage is hung. This internal gears in turns is run by worm Drive head (Worm shaft & worm gear) connected Gear Box by Chain & sprockets and the Gear box connected to Motor by Love joy Coupling.
• Suitable diameter of Influent well made out of MS or FRP bolted to the Center Scraper Cage.
• Feed inlet to the Clarifier is through the hollowed civil Centre pier bottom.
• Two Scraper arms, truss type fabricated fixed to Centre Scraper Cage suspended from the Centre mechanism to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes.
• Two Central Sludge well scrapers.

• A RCC civil pier construction with feed inflow arrangement and suitable RCC flocculation tank.
• Main driving half bridge spanning the tank radius of necessary walkway with handrails to access drives units at the centre.
• Centre mechanisms have a basic Turn table and a Bevel gear/Pinion arrangements resting RCC centre pier.
• Centre support with hinge pin arrangements rests over the Center mechanism.
• Bridge one end would be connected to the Centre support through hinge pin arrangements and the other to the traction trolleys.
• Traction trolleys will be positioned on the tangential line of the RCC tank to enable smooth running. Drive unit consisting of two traction wheels on journal and drive shaft connected to Gear Box by Chain & sprockets and the Gear box connected to Motor by Love joy Coupling.
• A truss type Scraper arm for outer tank is hung in Bridge bottom with suspended and cross braced vertical structures to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes.
• Two truss type Scraper arms, rigidly fabricated for inner Flocculation tank would be fixed to the Turn table of the Centre mechanism to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes.
• Rotor flocculation paddles would be fixed to a centre cage which in turn would be bolted to the bevel gear of the centre mechanism.
• Stator flocculation paddles would be the bottom Clarifier cage and shall project upwards up to the water level.
• Paddle will be rotate in opposite direction.
• Two Suitable Central Sludge well scrapers will be provided.

• The mechanism would be of centrally driven type with fixed half bridge spanning the tank radius. One end over the tank wall and other over a Centre mechanism cum turn table in the Centre pier.
• Bridge consists of necessary walkway with handrails to access drive unit at the centre.
• Centre mechanism Internal gear worm drive type turn table resting over a base frame on the RCC centre pier.
• Drive unit consisting of Centre mechanism with internal gears through which the Scraper Cage is hung. This internal gears in turns is run by worm Drive head (Worm shaft & worm gear) connected Gear Box by Chain & sprockets and the Gear box connected to Motor by Love joy Coupling.
• Suitable diameter of Influent well made out of MS or FRP bolted to the Center Scraper Cage.
• Feed inlet to the Clarifier is through the hollowed civil Centre pier bottom.
• Two Scraper arms, truss type fabricated fixed to Centre Scraper Cage suspended from the Centre mechanism to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes.
• Two Central Sludge well scrapers

• The mechanism would be of peripherally driven type having half bridge spanning the tank radius and having two or four independent flocculators within the flocculation tank.
• Bridge consists of necessary walkway with handrails to access centre support.
• Bridge one end would be connected to the Centre support and the other to the traction trolleys.
• Bridge centre support shall rest over the Slewing type Turntable over base plate will be anchored to the Central civil RCC pier.
• Traction trolleys will be positioned on the tangential line of the RCC tank to enable smooth running. Drive unit consisting of two traction wheels supported on journal and drive shaft connected to Gear Box by Chain & sprockets and the Gear box connected to Motor by coupling.
• A truss type Scraper arm for outer tank is hung in Bridge bottom with suspended and cross braced vertical structures to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes.
• Two truss type Scraper arms, rigidly fabricated for inner Flocculation tank would be fixed to the Turn table of the Centre mechanism to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes
• Feed inlet to the Clarifier is through the hollowed civil Centre pier bottom.
• Two Central Sludge well scrapers will be provided.
• A Slipring assembly (Ten ring collectors) will be provided for power supply.
• Two or Four independent flocculators placed at 90 or 180 on the bridge on the flocculation tank.
• Each flocculator drive consists of helical or worm geared motor with output shaft coupling.
• Flocculator shaft made out of heavy duty pipes suspended on output shaft coupling.
• Paddles will be bolted to th pipe shaft and entire unit shall be selected to achieve suitable rpm speed.

We are manufacturing world class Solid Contact Clarifiers that have capacity to act as both an improved flocculation device and high rate chemical precipitator. Here, mixing, internal solids recirculation, gentle flocculation and gravity sedimentation are all combined within single unit. The solid contact clarifiers mix the influent flow with previously settled solids within the draft tube. In this, the gentle mixing within the reaction well promotes agglomeration of floc particles and chemical precipitates. Then, the aggregated solids settle out more quickly in the clarification area. In the solid contact clarifiers, clarified overflow is removed through a radial launder system that draws water from the complete surface area to avoid solids carryover caused by uneven velocity currents. This Clarifier is a high rate, solid contact, sludge recirculation in minimum space and using a minimum amount of chemicals, produces an effluent of the highest quality. Used for clarification, lime softening, Silica reduction or organics reduction of water & waste waters containing suspended solids, colors and organic impurities. It provides means for chemical addition and mixing, flocculation and up flow clarification in a single unit.The mechanism would be of centrally driven type with fixed full bridge spanning the tank diameter with necessary walkway and handrails to access drive unit at the centre.This Clarifier is a high rate, solid contact, sludge recirculation in minimum space and using a minimum amount of chemicals, produces an effluent of the highest quality. Used for clarification, lime softening, Silica reduction or organics reduction of water & waste waters containing suspended solids, colors and organic impurities. It provides means for chemical addition and mixing, flocculation and up flow clarification in a single unit.

• The mechanism would be of centrally driven type with fixed full bridge (Lattice type) spanning the tank diameter with necessary walkway and handrails to access drive unit at the centre.
• Two more truss fabricated structures shall be placed at 90 to the bridge spanning the tank diameter to help suspend and hold the drat tube and detention hood.
• Clarifier Drive unit consisting of Drive head (Worm shaft & worm gear) connected to Gear Box by Chain & sprockets and the Gear box connected to Motor by Love joy Coupling.
• Main Vertical solid inserted into the Clarifier Drive head gear bore and keys locked, suspended freely, flange facing downwards.
• An intermediate Scraper arm shaft made out of Heavy duty pipe suspended from the vertical shaft.
• Two Scraper arms, rigidly fabricated to sweep the tank floor with Scraper blades, Neoprene Rubber squeezes and Strips to hold Squeezes.
• Suitable Central Sludge well scraper.
• Recirculation system will be placed between the top and bottom portions of the bridge.
• Main Nylocast driven gear bolted to the drive bearing and seated on the main vertical shaft between the aforesaid pair of bearings.
• Driven gear connected to the drive gear which is mounted on the Gearbox output shaft and input shaft connected to Motor by coupling.
• Recirculation shaft made out of heavy duty pipes and bolted to the driven gear bottom face.
• Impeller for recirculation bolted to the shaft.
• Suitable diameter of Draft tube for dozing and mixing suspended from the bridge bottom and properly reinforced. Inlet nozzle with flange at the bottom tangentially placed for Feed entry.
• Suitable diameter of Detention hood made out of FRP fixed for flocculation.

Features:

• Low energy mixing for chemical reactions & formation of floc particles
• Unique low shear high volume impeller
• Gravity sedimentation clarification and enhanced flocculation in one unit
• Consumes less chemical input
• Low horsepower requirements
• Requires less space than conventional flocculation and sedimentation train
• Considerable savings in terms of tank age, civil work, and operational costs

Applications:

• Pretreatment to conventional filtration
• Acid mine drainage
• Surface water clarification
• Cold lime softening
• Color removal
• Pretreatment to membranes
• Tertiary wastewater treatment
• Phosphorous removal
• Heavy metals removal