Shubham Engineers

G. T. Road, Ludhiana, Punjab

We have carved a niche as one of the chief Commercial Hot Water Systems Manufacturers and Suppliers in India. Hot Water Systems are used to provide centralized hot water supply, as for hotels, and also as a low cost, easy to maintain heating media when used with recirculation. Besides providing hot water at the turn of tap for hotels and industry, these units provide excellent heating in electroplating plants, phosphating plants, and centralized air heating systems. We have a very wide range of Hot Water Heating Systems to suit a wide array of applications. RANGE : Oil/Gas/Solid fuel fired.Fully automatic.Both pressurized and non-pressurized.Storage type, Recirculation Type, Coil Type.50000 Kcal/Hr to 40, 00, 000 Kcal/Hr. High efficiency Storage Type Hot water Unit We have a unique multi-pass submerged exchanger counter-flow design. The Gas Fired Hot Water System consists of a customized water tank, designed on the basis of customer's requirement. The stainless steel heat exchanger is fitted inside the tank and burner fires inside this heat exchanger. The flue gases pass through multiple passages to provide optimum residence time and consequently best efficiency. Since the complete heat exchanger assembly is submerged inside the tank, the heat produced is extracted from all sides, leading to very low flue gas losses and high fuel utilization. This means that al the heat generated by burning fuel goes directly to the water. This gives lowest running cost, highest efficiency and fastest heating. The tank is completely insulated with glass wool to further prevent heat losses and lower running costs. The unit comes with a fully automatic control panel fitted with Temperature controller, stainless steel low water safety switch, Italian gas / oil burner etc. Low water safety switch is for additional safety of the unit. It will not let the burner fire if there is not sufficient water in the tank, thus protecting the whole unit. The unit is powder coated from outside and look aesthetically superior. It also saves the unit from moisture, rust etc. Coil Type Hot Water Generators Wood Fired Coil Type Hot Water Unit Oil Fired Coil Type Hot Water Unit

We are a renowned Hot Air Systems Manufacturer and one of the major Exporters in the international market. Our Automatic Hot Air System and Oil Fired Hot Air System are highly efficient in performance. Hot Air Systems is a diesel/LPG or wood fired system which produces Hot air directly or indirectly through heat transfer obtained from flue gases. We have both Direct and Indirect hot air generating systems. Indirect Heating : The flue gases from fuel burning do not come in contact with fresh air which is being heated and consequently the hot air generated is free from any odour, carbon particles or soot. This hot air can be fed directly to existing tumblers, dryers, chambers or whenever hot air is desired. The hot air generated is free from moisture and can attain a temperature of upto 300°C. In most of the cases, the savings are in the range of 65-70% over Electrical or steam heated systems. Direct Heating : Hot flue gases are mixed with cold atmospheric or re-circulated air to generate hot air at requisite temperature. This is used where higher temperature air is required. LPG/Gas based systems are more suited for this application. SALIENT FEATURES : Outlet air free from any carbon, soot, smell or odour.Fitted with imported high efficiency monoblock burners, noiseless in operation.Only unit available in 5 - pass system, highest efficiency.Complete unit is fully insulated, no heat loss, higher efficiency.Fully automatic operation.Very low start-up time, no fuel wastage, only about 3-4 minutes for 100°C.Practically maintenance free, no de-scaling or burnout problems. Only air goes in, Only air comes out.In most of the cases, no modification is required for existing tumblers etc.WOOD / GAS FIRED SYSTEMS : These units are also available in wood fired models as well as Gas fired ones.

We are reckoned as one of the eminent Industrial Steam Boilers Manufacturers and High Pressure Steam Boilers Exporters. We have a very wide range of Flue tube boilers to suit varied applications. High thermal efficiency, lower heat flux, high steam chest and longer reversals ensure years of trouble free operation. Ease of maintenance and quality components are our hallmarks. Our Range of STEAM BOILERS includes : Wood/Coal fired.Oil fired (LDO/Diesel/Kerosene)Gas fired (LPG/Propane/Natural gas) In capacities ranging from 50 Kg/hr to 20000 Kg/Hr. We manufacture steam boilers in various construction types to suit a diverse range of applications and customer’s specific requirement like : Flue tube boilers in fully wet back and conventional construction - oil/gas/solid fuel firedCoil type boilers – single coil, double coil, vertical, horizontal – in oil/gas/solid fuel fired models. Shell type Boilers – Oil/gas/Wood fired. COIL TYPE BOILERS Instant steaming boilers, the coil type boiler is a marvel of reverse flame technology. Fully automatic, Oil/ Gas or Wood fired, water tube steam generator of coil type construction. The furnace has airtight helical coil/ double coil of membrane wall construction, placed inside suitably sized shell assembly and double jacketed ms shell with aluminium radiator. Preheated combustion air, integral economiser and three-pass/ four-pass design provide further boost to efficiency. A Unique feature available in only our coil type boilers is the integral steam superheater, which removes the trace moisture in the steam and prevents moisture carry-over, a common problem in other coil type boilers. This boiler is capable of generating steam within 3 - 5 minutes of cold start and utilizes long residence time of flue gases to provide superb combustion efficiency. A number of safeties ensure safe unattended operation. These boilers are available in wide range from 100 Kg/Hr to 1500 Kg/Hr. Oil Fired Vertical Coil Type Boiler Wood Fired Vertical Coil Type Boiler Horizontal double coil boiler

We are accounted among the most eminent Manufacturers of Thermic Fluid Heaters in global market. Our extremely superior Thermic Fluid Heaters render economical and efficient mode of heating than any other equipment. They ensure high efficiency of heat transfer, long thermic fluid life, corrosion free, no scale problems, no boiler regulation and prospect of high temperature. Our Gas Fired Thermic Fluid Heaters have fully automatic burner, high temperature re-circulating pumps, advanced safety features, complete control panel, that distinguish them in international market. Above all, we offer Electric Thermic Fluid Heaters at industry’s best price. Specification Output (Kcal/Hr)1, 00, 0002, 00, 0004, 00, 0006, 00, 00010, 00, 000EfficiencyFuel Consumption Kg/Hr11.422.945.768.6114.4Pump Motor (HP)5.07.510.012.515Fuel pump Motor(HP)------------0.51.0Blower motor (HP)1.02.03.05.010.0Total connected Load (HP)6.09.513.018.026.0

• Material of ConstructionMild Steel
• SizeCustomized
• Brand/MakeShubham Engineers