Shyam Industries Rajkot, Gujarat

These are two stage pet blow moulding machines that can be used to manufacture round as well as flat style Pet bottles. Being easy and safe to operate, these machines can help you achieve high outputs, while maintaining the quality consistently. Production rate ranges from 2600 bottles per hour to 5600 bottles per hour. Starting from feeding until the discharging of the bottle, the entire process is completely automatic.     Preform Handling Robust gripping system in Loader and Ejector, to prevent breakage of grippers. Hylam Carriers for longer life and noise reduction. Heat Conditioning Close Loop Heating Control (Auto Preform Temperature Control). Positioning of Haters - Better, Faster and Simpler. Individual Heater position adjustable in both axes. Dual Neck Protection - Chilled Water and Air Ventilation for Heating Chamber with controllable Vent (for better heat penetration). Stretching Servo Stretching (optional). Dual Stretching to reduce cycle time. Non Contact Linear potentiometer to achieve Precise Process control. Mould Clamping Unit Mould Clamping using Toggle mechanism for fast cycles. Mould Compensation for Positive Locking. Reduce Change Overtime Quick Mould Changeover system. No lifting equipment required. No need to change cooling lines. Less time and efforts required.

These Low Cost Pet Stretch Blow Moulding Machines used mainly to manufacture wide mouthed jars with production rate of up to 800 jars per hour. The neck size ranges from 38 and 110 mm, with maximum capacity of 2.5 liters. Manufactured with Single cavity, these machines offer unique neck protection during blowing and heating.   Manual Loading of Preforms. Auto Ejection of Blown Containers. Proportional Hydraulics. Easy to operate.

• Production30 - 110 kg / Hr
• RangeRange

• Production350 - 750 kg / Hr

Our soft PVC tubing plant is built for maximum energy efficiency with specially designed screw as well as dies for tubing. High and consistent output is assured at all times. The plant can be used for manufacturing PVC tubing for different kinds of applications.

• Extruder2 Nos.
• Single Screw Dia.65 mm
• L:D Ratio25 : 1
• Motor kW11.25 kW each
• Total Connected Load63.00 Kw
• Heating Load31.400 kW
• Motors & Blowers31.600 kW
• Tension3 Phase 415V + 5% N+E
• Frequency50 Hz
• No. of Disk2
• No. of Spindles per disk18

Versatile Machine  ( 20 ml to 5000 ml neck size 19 mm to 150 mm )   These versatile machines can be used to manufacture different kinds of bottles with neck diameter of 20 mm to 150 mm. The bottle / jar capacity can range from 40 ml up until 5000 ml.   Mould Clamping Hydraulic mould clamping system to enhance power efficiency. It saves air consumption and hence reduces production cost. Unique mechanical lock system for positive locking. Heating Close loop heating system and auto chamber temperature control (to compensate variation in preform heating due to ambient temperature). Optional auto preform temperature control. Positioning of heaters is better, ensuring faster and simpler heating. Individual heater position is adjustable in both axes to achieve optimum heating. Air ventilation with controllable venting in heating chamber (for better heat penetration control). Start-stop index type oven to minimize variation in temperature of both preforms coming out of chamber at a time. Product Range Versatile range to produce 40 ml to 5000 ml bottle / jar. Neck diameter ranging from 20 mm to 120 mm. Due to hydraulic operations, mould can be stopped where required. In case of small diameter bottles, this increases production rate and reduces production cost. Safety Two hand operations (till mould close function is complete) to prevent accidents. ELCB in main supply for protection against electric shock. Individual MCBs for all heaters.