Square Chuck Pin Vice Watchmakers Tool

Square Chuck Pin Vice Watchmakers Tool, Ideal for holding small jobs. Holding Capacity 0 to .150" 0 to 3.8 mm.Overall Length 4".Reversible with two size capacities at each end.

View Complete Details

Ask Latest Price & Details

Integrated R-8 Shank Boring Head

HEAD DIAMETER 2-1/2''
OVERALL LENGTH 7-3/16''

Integrated R-8 Shank Boring Head, Integrated Shank for maximum rigidity.Hardened and Ground body.Black oxidised finish.Cross and Vertical Hole dia 12" .Offset travel 34".

View Complete Details

Ask Latest Price & Details

Mini Magnetic Stand

BASE DIA 1-1/8inch, 28mm
TOTAL HEIGHT INCH5, 125mm

Mini Magnetic Stand, Compact and universal permanent magnetic stand.High magnetic power for maximum rigidity.Includes disc on bottom for neutralizing magnet when not in use.

View Complete Details

Ask Latest Price & Details

Surface Marking Blocks

HEIGHT 12INCH, 300MM
BASE DIAMETER 3-1/8Inch, 80MM

Surface Marking Blocks Gauges - Round Base, Sturdy construction surface gauge.Consists of Adjusting knob and hardened scriber.Round base made of close grain Cast Iron.Very useful for every workshop.

View Complete Details

Ask Latest Price & Details

Automatic High Speed Double Stroke Cold Heading Machines

Dia. of Bolt (MM)4 - 6.5
Output (Pcs. / Min.)90 - 100
Weight Appx. (Kgs.)2500

Automatic High Speed Double Stroke Cold Heading Machines, These cold heading machines are fully automatic and easy to operate with little training, fitted with Solid Die to produce blank for Bolts, Screws, Rivets and other similar components. Cut off and knock out mechanism have safely devices that will stop any major accident if any abnormal function occurs in machines.

View Complete Details

Ask Latest Price & Details

Automatic Thread Rolling Machines (High Speed)

Weight Appx. (Kgs.)1200
Output (Pcs. / Min.)95 - 105

Automatic Thread Rolling Machines (High Speed), These machines are designed for mass production and lowest maintenance cost.Suitable for threading bolts, automobile parts and other similar components.Two flats dies used in these machines, which easily fitted and adjusted.

View Complete Details

Ask Latest Price & Details

Single Point Diamond Dresser

Single Point Diamond Dresser, High quality Diamonds.Available in Shank sizes 14", 38", 716", 12" and over all length 1-12" to 6".Ideal tool for dressing wheels for Surface Grinders, Universal Grinders, Cylindrical Grinders, Centreless Grinders etc. Carat Sizes 14, 13, 12, 34, 1, 1-14, 1-12, 2, 2-12, 3, 3-12, 4 & 5.

View Complete Details

Ask Latest Price & Details

Edge & Centre Finders

SHANK DIA. 12, 9
TIP DIA. 5mm

Edge & Centre Finders, Hardened all over and ground on all working surfaces.Edge finder works well on round or straight surfaces.The centre finder will pick up cross lines to machine drill or bore holes to a layout.

View Complete Details

Ask Latest Price & Details

Self Centering Clamps

SIZES 2Inch, 50Mm

Self Centering Vices & Clamps (Fixed & Swivel Base), Body made out of special graded casting.Hardened Steel Jaws provided "V" grooves for round jobs both Horizontal & Vertically.Special Steel Screw is provided for long life.

View Complete Details

Ask Latest Price & Details

Jack Plane

Sheet fabricated with carbon steel blade.Blades made of alloy steel, hardened and ground.Available in Plain & Corrugated Base.Engineered for high precision.

View Complete Details

Ask Latest Price & Details

Pin Chuck Sets Watchmakers Tool

Pin Chuck Sets Watchmakers Tool, .A. PIN CHUCK SET:Designed for holding small Drills.Three interchangeable collets available.Black Shiny finish.One Pin Chuck with all three Collets: 0 to 132", 132" to 116", 116" to 332".Available in attractive Plastic Pouch. .B. ADAPTER PIN CHUCK SET:For use with miniature drills.Lock this adapter in chuck to convert it for precise drilling. Also adapts 332" collets on rotary tools and flexible shafts to a more useful 0 to 332". Comes with two set of jaws ( capacity 0 to 116" and 116" to 332" ). Shank dia. 332", shank length 1-38".Overall length 2-58".Available in attractive Plastic Pouch.

View Complete Details

Ask Latest Price & Details

Nut Former

Weight Apprx. 5000, 6500 (Kgs)
Main Motor Rq. 5, 7.5 , 10 (H.P.)

These machines are suitable to produce round, hex, flange nuts and other similar components. For trouble free running of the machines the automatic centralized lubrication system provides adequate quantity of lubricant to all bearing surface. The shortest die to die distance is a basic condition for high speed production because the shortest distance takes the lease time for the movement of transferring.

View Complete Details

Ask Latest Price & Details

Nut Manufacturing Machines

Production Capacity 5/16, 5/8 Inches
Weight Apprx. 25000, 16000 Kgs

These machines are suitable to produce round, hex, flange nuts and other similar components. For trouble free running of the machines the automatic centralized lubrication system provides adequate quantity of lubricant to all bearing surface.The shortest die to die distance is a basic condition for high speed production because the shortest distance takes the lease time for the movement of transferring.The transfer shaft is precisely made, while the transfer finger is automatic aligning with the punch and die.Increased productivity at lower operational cost and man power.

View Complete Details

Ask Latest Price & Details

Cold Forging Machine

A positive knock out provision had been made on the 1st and 2nd punches to eliminate the possibility of parts sticking to these punches during the operations. The maximum parts of the machines are ground and all the Cames and Rollers from H.C.H.C. ( Hardened & Ground ).

View Complete Details

Ask Latest Price & Details

Indexible Carbide Turing Tool Holders

SIZE OF SQ. SHANK 3/8''

Indexible Carbide Turing Tool Holders, Versatility of cutting in any direction.Built in Chip Breaker Groove. Ready to use.No. Grinding - No Tool Resetting. Economical Alternative to Brazed Tool Tips.Supplied without Inserts.

View Complete Details

Ask Latest Price & Details

Starting Punches (Heavy Duty)

Starting Punches (Heavy Duty), Enamel painted body with polished working ends.Made from high quality Carbon Steel.Accurately hardened and tempered.Suitable for installing pins & rivets and for starting their removal.

View Complete Details

Ask Latest Price & Details

Compound Sliding Table

TABLE SIZE 6 x 6Inch, 150 x 150Mm

Compound Sliding Table (Milling & Drilling Table), Low silhouette table for light work.Widely spaced, Graduation for Fast, Accurate Reading.Easy to set.

View Complete Details

Ask Latest Price & Details

Precision Grinding Vice Clamps

SIZES 2Inch, 50Mm

Precision Grinding Vice Clamps, Body and Jaw of solid all steel Construction and Case hardened.Slotted sides provide multitude of clamping possibilities.Locking Screw provided at the Vice base for adjustable positions of the moveable Jaw.

View Complete Details

Ask Latest Price & Details

Fly Tool Cutter Holders

DIAMETER 3/4"Head, 1/2"SHANK
HOLDING SIZE OF BIT 3/16"

Fly Tool Cutter Holders, Counterbalanced to get smoother finishes.Made of Hardened steel.Shiny Black Finish.

View Complete Details

Ask Latest Price & Details

Turning Tool Bit Holders

SIZE OF HOLDER 5/16" x 3/4" x 4-1/2"
SIZE OF CUTTER 3/16"

Turning Tool Bit Holders, Accurately Machined. Heat Treated & Hardened.Provided with one wrench. Supplied without Tool Bits. Available in ST (straight), LT (left) and RT (right) hand shanks.

View Complete Details

Ask Latest Price & Details

Low-boy Angle Dresser

Low-Boy Angle Dresser, Designed for use on all Grinding Machines.Base Angle-Plate is Heavy, Precision Ground, Square on all six sides to an accuracy of .0005.Side Block Pivots on Hardened Shoulder Screws.Includes Diamond Dresser 38 (9.5 mm) x 2 (50 mm) (14 Carat).

View Complete Details

Ask Latest Price & Details

2 PC. Milling Machine Vicea Clamps

SIZES 6Inch, 150mm

2 Pc. Milling Machine Vicea Clamps, Body made of high quality Casting.Hardened and Ground Jaw Plates.Designed to handle extra long workpiece, thus utilizing full length of machine bed.Work locates directly on bed for extra rigidity.Quarter turn of detachable handle clamps work firm enough for heaviest cuts.

View Complete Details

Ask Latest Price & Details

Precision V-Block Set

LENGTH 2-3/8Inch, 60Mm
WIDTH 2-3/4Inch, 70Mm
HEIGHT 2Inch, 50Mm

Precision V-Block & Clamp Set - Multi Use, Multi-Use : Holds both Square and Round Work.Stepped Groove Construction permits both Low and High Clamping.Side Hole-Provided in each block to facilitate clamping.Made of Hardened Tool Steel, Machined and Ground in Pairs.All Sides Precision Ground Parallel and Square to an accuracy of 0.0003".Set Consists of Two V-Blocks and Two Clamps.Capacity : 2" (50 mm) Round and 1-716" (36.5 mm) Square.LENGTH

View Complete Details

Ask Latest Price & Details

Utility Punch & Scriber

Length 7-1/2INCH, 190MM
DIAMETER OF PUNCH 5/32INCH, 4.0MM

Utility Punch & Scriber, Hexagonal Body for comfortable grip.Ideal for Punching Holes in sheet metal.Can also be used as a Scriber.Hardened Point.Punch made of Tool Steel.

View Complete Details

Ask Latest Price & Details

Milling Machine Vice (Heavy Duty) Clamps

SIZES 2Inch, 50Mm

Milling Machine Vice (Heavy Duty) Clamps, Vice body of high tensile, closed grain Cast Iron.Hardened and ground Jaw Plates.Swivel base graduated 360 for horizontal indexing.Totally enclosed acme screw.Low base design for use on drilling, Milling and Shaping Machine.

View Complete Details

Ask Latest Price & Details

Universal Grinding Gauges

OVERALL LENGTH 3-3/4Inch, 95MM

Universal Grinding Gauges, Made of Polished Stainless Steel.Clearly etched graduations.Combines twist drill grinding gauges, thread gaugeMeasures Square and hexagonal angles of 120, 118, 90, 60, 55.

View Complete Details

Ask Latest Price & Details

Rivet Making Machine

Dia 2.5 - 4mm
Weight Appx. 450kgs

Latest improved design for mass production and lower maintenance cost.Machines are fitted with two hoppers, one feeds the rivets and second feeds the nails.The function of the machine is to fit the nails into the rivets.

View Complete Details

Ask Latest Price & Details

MAGNETIC ADJUSTABLE LINKS

Magnetic Adjustable Links, Widely used for holding and Welding. Can be set at any angle by adjustment and locking of wing nut.Each Block is 2" x 1" x 1". Overall Length 4-58" and Overall Width 2".

View Complete Details

Ask Latest Price & Details

Tilting Table

Size 125 x 175 mm

Heavy and sturdy machined castings. Range 45 each way from vertical. Locking action by 2 clamping Screws on each end. Low profile for low machine head clearance. 3 Machined "T" slots and precise ground table surface.

View Complete Details

Ask Latest Price & Details

Tilting Tables - Adjustable Angle Plates

Height 3-3/4Inch, 95Mm
Size 5 x 7 INCH, 125 x 175Mm

Tilting Tables - Adjustable Angle Plates, Heavy and sturdy machined castings.Range 45 each way from vertical.Locking action by 2 clamping Screws on each end.Low profile for low machine head clearance.3 Machined "T" slots and precise ground table surface .

View Complete Details

Ask Latest Price & Details

Drill Press

Body made from selected Cast Iron.Works well with High Pressure drilling Machine.SIZES : 3, 4, 5, 6 INCH, JAW WIDTH : 75, 100, 125, 150 MM, JAW OPENING 75, 100, 125, 150 MM

View Complete Details

Ask Latest Price & Details

Cutting Combind Drills Tools

TOTAL LENGTH 1-1/4'', 1-7/8''

Cutting Combind Drills & Counter Sinks Tools, Used for Producing Center holes in Components or Workpieces which require machining between Centers.60 Countersink Angle fits all Standard Centers.Plain Type available in 60, 82 or 90 Angle, also available with Standard and Long Lengths.Made from High Speed Steel.

View Complete Details

Ask Latest Price & Details

Precision Boring Heads

HEAD DIA 2''
THREAD SIZE 7/8'' x 20

Precision Boring Heads, Machined from High grade steel with tool blocks hardened and ground.Ideal for mill or Jig bore operations.Non-Reflecting Satin Chrome Body allows easy reading and adjustment.Threaded back for interchangeable Shanks.Features .0005" graduation on dial for accurate hole sizing.

View Complete Details

Ask Latest Price & Details

Letter & Number Punches

SIZES 1/16inch, 1.5MM

Letter & Number Punches, Hardened sticks of punches, in black finish are packed in plastic boxes.Number set consist 0-8 (9 Sticks). No. 6 is inverted to make No. 9. Letter Set consist A-Z and & (27 sticks). Combination Set consist 27 Letters & 9 Numbers ( 36 Sticks).

View Complete Details

Ask Latest Price & Details

Parting Tool Holders

Length 2-3/4"
BLADE SIZE 1/2" x 3/32"
HEIGHT 13/16"
WIDTH 1/2"
DEPTH 1/2"

Parting Tool Holder, One piece construction with 100% clamping power.Can be used both on front and rear tool post of the cross line.Holds and guides the bevelled blade in a way that it ensures equal clearance on both sides.Supplied without blade.

View Complete Details

Ask Latest Price & Details

Roll Forming Machines

Roll Forming Machines, Most uptodate yet simplest design and robust construction ensures precise performance, easy operation and higher productivity.These machines are available with 'manual' as well as 'automatic control' panel. The cutting of the section after forming can be done by "Manual" or "Hydraulic Shearing".

View Complete Details

Ask Latest Price & Details

2-Way Universal Tilting Angle Vice Clamps

SIZES 2Inch, 50Mm
JAW OPENING 2Inch, 50Mm

2-Way Universal Tilting and Swivel Angle Vice Clamps, Vice Body made of High tensile closed grain Cast Iron.Steel Jaw Plates are ground and Hardened to 50-60 HRC.Base can be Swiveled through 360 and Vise tilted through 90.Vice can be locked positively at various compound angles.Two Oil Holes provided on Vice Body.Ideal Vice for Milling, Grinding, Shaping, Drilling and Jig boring.

View Complete Details

Ask Latest Price & Details

Wood Working Chisels Carpentry Tool

BLADE WIDTH 4MM, 5/32INCH

Wood Working Chisels Carpentry Tool , Blade size marked for easy user selection.Beveled Blade can be re-sharpened.Blade Forged from Top Quality Chrome Vanadium Steel.Accurately hardened tempered and ground on all faces and edges.

View Complete Details

Ask Latest Price & Details

Hi-low Adjustable Dresser

Hi-Low Adjustable Dresse, Designed for use on all Grinding Machines.Dress O.D. and face of Wheels.Adjustable to 7 (175 mm) Height.Dress any Width.Rugged construction.Includes Diamond Dresser : 38 (9.5 mm) x 3 (75 mm) (14 Carat).

View Complete Details

Ask Latest Price & Details

Diamond Grip WAtchmakers Tool

Diamond Grip - Coloured WAtchmakers Tool, .A. DIAMOND GRIP - COLOURED:Available in Different Colours of your choice.Black, Brown, Blue, Green, Red, Yellow. .B. DIAMOND GRIP - COLOURED (SMALL):Available in Different Colours of your choice.Black, Brown, Blue, Green, Red, Yellow.

View Complete Details

Ask Latest Price & Details

Measuring Precision Steel Squares Tools

STOCK LENGTH 1-1/2Inch, 38mm
EFFECTIVE BLADE LENGTH 1INCH, 25mm

Measuring & Marking Precision Steel Squares Tools, Made of Finest quality ground steel with heavy thick stock.Blade is hardened and Ground for straightness and Parallelism.Squares are accurate both inside and outside.Sizes 18" (450mm) and above are supplied in finished wooden box.Effective Blade length measured from inner edge of the beam to end of the blade and is approximately 14" (6mm) more than sizes shown.

View Complete Details

Ask Latest Price & Details

Pin Vice Single Ended Watchmakers Tool

CAPACITY 0.8 to 1.5 mm, 3.0 to 4.8 mm

Pin Vice Single Ended Watchmakers Tool, Ideal vice for holding small Tools, Wires, Taps etc.Collets grip firmly when screw chuck is tightened.Heavy knurled body.Black Shiny finish.Available in individual sizes and also in a set of four in attractive pouch.

View Complete Details

Ask Latest Price & Details

Drill Chucks

CHUCK CAPACITY 0 – 6.5
CHUCK MOUNT 1 J T

Drill Chucks, Key operated guided jaws type.Made from special steel.Screw rings hardened and ground.Key hardened and blacked.

View Complete Details

Ask Latest Price & Details

Pot Magnet

Diameter 11/16inch, 14mm
HEIGHT 5/8ainch, 16mm
PULL 10 lbs.

Pot Magnet, Has unlimited applications, such as magnetic fasteners, holding Maps etc.Has taped hole of 14" (20 TPI).Comes with Plated keepers.

View Complete Details

Ask Latest Price & Details

Pick Up Tools Watchmakers Tool

Pick Up Tools Watchmakers Tool, Ideal Tool for picking and Holding small items.Chrome plated knurled Body.Very Handy Tool for Machinists, Assemblers, Mechanics and Jewellers.

View Complete Details

Ask Latest Price & Details

MAGNETIC BASE PUSH BUTTON

OVERALL HEIGHT INCH9-1/4 x MM235
BASE DIMENSIONS 1-7/8 x 1-3/4 x 2Inch, 48 x 45 x 50mm

Magnetic Base - Push Button, Provided with ONOFF Push Button.Specially designed to use with Dial Gauges to work on Surface Plate and Machine Tables.Magnetic Pull on base and two sides. Magnetic Pull 25 kg (55 lbs ) approximately.

View Complete Details

Ask Latest Price & Details

Square Head Centre Punches

TIP DIA. 1/16 Inch, 1.6MM

Centre Punches (Round & Square Head), Made from Tool Steel, Hardened and ground.Black shiny finish with knurled body for easy grip.Available in plastic pouch in individual sizes and also in a set of 5 Pcs.

View Complete Details

Ask Latest Price & Details

Knurling Tool With Holder

SIZE OF HOLDERS 5/16" x 3/4" x 5"
KNURL DIMENSIONS (DIA THICK HOLES) 5/8"x5/16"x7/32"

Knurling Tool with Holde, High Speed Steel Knurls.Six knurls Tool is provided with one pair each of fine medium and coarse knurls.Two knurls Tool is generally provided with medium knurls but other knurls can also be provided if required.Shiny Black finish.

View Complete Details

Ask Latest Price & Details

Simran Tools Anand Parvat, Delhi

Our Products

Square Chuck Pin Vice Watchmakers Tool

Integrated R-8 Shank Boring Head

Mini Magnetic Stand

Surface Marking Blocks

Automatic High Speed Double Stroke Cold Heading Machines

Automatic Thread Rolling Machines (High Speed)

Single Point Diamond Dresser

Edge & Centre Finders

Self Centering Clamps

Jack Plane

Pin Chuck Sets Watchmakers Tool

Nut Former

Nut Manufacturing Machines

Cold Forging Machine

Indexible Carbide Turing Tool Holders

Starting Punches (Heavy Duty)

Compound Sliding Table

Precision Grinding Vice Clamps

Fly Tool Cutter Holders

Turning Tool Bit Holders

Low-boy Angle Dresser

2 PC. Milling Machine Vicea Clamps

Precision V-Block Set

Utility Punch & Scriber

Milling Machine Vice (Heavy Duty) Clamps

Universal Grinding Gauges

Rivet Making Machine

MAGNETIC ADJUSTABLE LINKS

Tilting Table

Tilting Tables - Adjustable Angle Plates

Drill Press

Cutting Combind Drills Tools

Precision Boring Heads

Letter & Number Punches

Parting Tool Holders

Roll Forming Machines

2-Way Universal Tilting Angle Vice Clamps

Wood Working Chisels Carpentry Tool

Hi-low Adjustable Dresser

Diamond Grip WAtchmakers Tool

Measuring Precision Steel Squares Tools

Pin Vice Single Ended Watchmakers Tool

Drill Chucks

Pot Magnet

Pick Up Tools Watchmakers Tool

MAGNETIC BASE PUSH BUTTON

Square Head Centre Punches

Knurling Tool With Holder

Contact Us

Simran Tools
Anand Parvat, Delhi