SKCO PAINTS

PREMIUM ACRYLIC WALL PUTTY

• Coverage** surface by Brush. On Smooth and non-absorbent surface. 20 Sq.ft/ per Kg.
• Drying Time Surface Dry: 30 minutes.
• @27° ± 2°C & RH 60 ± 5% Recoating: Min. 4 - 6 hrs.
• Gloss Levels/ Sheen levels Matt
• Thinning If required with water.
• Stability of Thinned Paint. Use within 24 hrs.
• Shelf life 1 year from date of manufacture in original tightly closed. Containers away from direct sunlight and excessive heat.

PERFORMANCE FEATURES & BENEFITS 1. Smooth and pleasing finish. 2. Ease of application. 3. Accelerates speed of work. 4. No undulations. 5. Optimum Performance.   RECOMMENDED SYSTEM FOR APPLICATION Ensure the surface is clean; dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area. Allow to react for 6 – 8 hrs.  For new masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.  CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water.  In case of areas having excessive dampness use Damp Block to limit further dampness.  In case of dents and holes use Laxmi spray plaster/wall putty or white cement and fine sand in the ratio 1: 3.