Post Buy Requirement
SD
Aurangabad, Maharashtra, India
Add Review

Our Products

  1. Coupling 18 Products available
  2. Servo Motors 3 Products available
  3. Power Packs 5 Products available
  4. Industrial Pump 4 Products available
  5. Trucks 4 Products available
  6. Hydraulic And Pneumatic Cylinders 5 Products available
  7. Valves & Valve Fittings 4 Products available
  8. Industrial Valves 7 Products available
  9. Others 75 Products available

Other Products / Services

DM High Torque

DM High torque capacity yet compact direct mounting design, suitable for backstopping applications
Available in a wide range of sizes, from 125 to 513
View Complete Details

Enhanced Seal

Enhanced Seal The Renold enhanced seal sprag clutch range of products are based on the standard size range of 1027 to 3500. The design of the clutch includes a Labyrinth seal, preventing the ingress of abrasive dust, grit and moisture making it suitable for use in most hostile environments.
View Complete Details

Series S Shaft Straightening Presses

As the name suggests, these machines are used for straightening shafts. The versatile technology coupled with the compact dimensions make these the most suitable machines for shaft straightening.
View Complete Details

Series M Manually Operated Presses

Series M manually operate presses were launched as a compact low cost systems eliminating the use of electronics. These systems are actuated manually with a hand lever valve and used in areas where only basic functionality is required and use of electronics is not preferred.
View Complete Details

Torque Limiter

Torque Limiter The Renold sprag clutch torque limiter device is designed for use on applications where overload conditions are to be restricted to a design limit.
View Complete Details

Compact C Frame Presses

Compact C-Frame presses are specially designed for small components requiring limited spaces. This not only reduces the initial investment but also the space requirement of the machine thus making small manufacturing cell possible. These compact and low cost c-frame presses are ideally suited for small size jobs such as automotive cable crimping, hose pipe end fitting crimping, stamping etc.
View Complete Details

Low Height Jacks Plain Ram

  • Caution Provide a level and solid support for entire jack base since the ram guide length is small.
Low profile design for use in confined area.

Used in Power and Steel Plants, Ship building Ship repair and Construction.

Higher capacity and customize solutions on request.

Specifications are subject to change due to continual improvement.

Capacity and Stroke specified are maximum safe limits. As safe, practice use at 80% of rating.
View Complete Details

Pancake Jacks Plain Ram

  • Caution Provide a level and solid support for entire jack base area since the ram guide length is small
Application

Used in confined area with extremely low clearence.

Ideally suited for precision lifting, alignment of machinery, heavy structures and removal of pulleys sprockets on taper seats.

Higher capacity and Stroke specified are maximum safe limits. As safe, practice use at 80% of rating.
View Complete Details

IR Tool Hoist

MLK Series and HLK Series
0.25 to 6 metric ton lifting capacities

Features

MLK Series
The Ingersoll Rand MLK family of hoists id suitable for A5H5 severe-duty use in the 0.25 to 1 metric ton range. The MLK Series is designed to be used as a high-speed protaction habit; the MLKS* is better suited for slow-speed spotting.

HLK Series
The HLK Series incorporates a larger chain wheel to accommodate 38" diameter chain and a lower gear ratio to handle increased load capacities. HLK Series hoist capacities range from 1 to 6 metric tons and are severe-duty rated.Refer to the trolley section on page 61 for plain, and motorized trolleys.
View Complete Details

Series N - Hydro Pneumatic Press

The latest N series Hydro-Pneumatic Presses are available in the following configurations as standard options. The 2 Colum, 4 Colum or C-Frame type can be selected depending on the job being done, component size, auto manual loading etc. Moreover, Mercury also customizes the bed size of the machine to suit customer, die sizes or special requirements.
View Complete Details

Air Boosters

It is not unusual that, during some applications the thrust generated by a pneumatic system is not sufficient for a specific purpose that it has been designed for. In order to get a higher output pressure, the inlet pressure needs to be increased which in some cases may require to be higher that the shop line pressure. It is in those situations that MERCURY Air Boosters are the ideal solution to generate the desired outcome.
View Complete Details

Submersible Sewage Pump

  • Features Stationary / portable installation • Dry/ wet pit installation • With/ without macerator • Mixer head for agitation • With/without ceram coating for aggressive liquids Etc
  • Technical Data Qmax : 8000 m3/hr • Hmax : 100 m • Temperature: up to 60°C • Delivery Size: DN 32 - DN 600
Design

Vertical submersible sewage pumps
Stage: Single
Non clog (free flow single multi channel) impeller
Large free passage size up to 200 mm double mechanical seal
Oil barrier chamber with float switch winding bearing temperature indicators moisture sensor

Application

Municipal raw sewage transfer
Sewage treatment plants
Effluent treatment plants
Dirty water in industry
View Complete Details

Prssure Boosting System

Design

Prssure boosting system with 2 to 6 parallel-switched, non self-priming stainless steel high- pressure multistage centrifugal pumps

Application

Fully automatic water supply and pressure boosting in residential, commercial and public buildings, hostals, hospitals, department stores and industrial systems.
Pumping of drinking water and process water, cooling water, fire water (apart from fir- extinguishing systems in accordance with DIN 14462 and with the approvel of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fiber constituents.
View Complete Details

Rail System

Zimmerman Series Rail Systems
Components :
Safty first
The primary and vital concern of Ingersoll Rand is safty.
Deflection - Ingersoll Rand rail is designed to not exceed 1450 of span, in accordance with ANSI B30.11 monorail and underhuge cranes
Safety cables - WE require the use of safety cable at all moving (hanger and end-truck) suspension points
Redundant end stop - Available for extra safety
Load ratings - Clearly makred on both sides of bridge cranes
Safety - All hardware components are rated at a 5 to 1 safety factor based on meticulous tests performed at testing laboratories.
View Complete Details

Pneumatic Grease Dispensing Pumps

Mercury Pneumatic Grease Pumps are an efficient, low cost alternative to motorized grease pumps and hand operated pumps. They are used for dispensing preset quantity of grease into various machine components such as bearings, shaft assemblies, gear assemblies etc.
View Complete Details

Hand Operated Stacker

HAND OPERATED STACKER
Model - DS - 5815
Capacity:5008001500 kg

Silent in operation
Easy to operate
Light and manoeuvrable
Minimum maintenance
Economical
Compact
Versatile
View Complete Details

Manual Hydraulic Lift Table

Manual Hydraulic Lift Table
Capacity : 500800 kg

Effortless operation
Robust stability
Firm anchoring
Compact design
View Complete Details

Battery Operated Stackers

BATTERY OPERATED STACKERS
Model - DPS-101215
Capacity: 100012001500 kg

Silent in operation
Easy to operate
Light and manoeuvrable
Minimum maintenance
Economical
Compact
Versatile
View Complete Details

Hydraulic Dock Leveler

HYDRAULIC DOCK LEVELER SPECIFICATIONS
Model - DHD-30-90
Capacity: 30009000 kg

Quality Dock Leveler
Easy to Install and Operate
Long Lasting
Safe
View Complete Details

Paper Roll Pallet Truck Version / Beam

Paper Roll Pallet Truck Version Beam
Capacity : 2500 kg

Easy to operate
Silent in operation
Requires minimum pulling power
No oil leakage
Minimum maintenance
Maximum manoeuvrability
View Complete Details

HDO - Bevel Helical Gear Reducer

The new bevel helical gear reducer series from Bonfiglioli optimises superior performance with compact dimensions and flexibility. The several options that can be selected from the catalogue facilitate customization to meet specific application requirements, Gear case from nodular cast iron guarantee rigidity in all circumstances while gears, integrally ground finished on there profile, ensure quite and vibration-free operation even in the harshest conditions.
View Complete Details

HDP Gear Box

Toque rating consistently high, gear ratios in close progression, numerous mounting options along with compact dimensions will ease the engineering of any application. The housing from nodular cast iron ensures robustness even in the hardest environment and the class of precision the gear are machined into helps producing an extremely quite and vibration-free operation.
View Complete Details

Hydraulic Scissor Lift Tables

HYDRAULIC SCISSOR LIFT TABLES
Model - DLT-5102030
Capacity: 500100020003000 kg

Effortless operation
Robust stability
Firm anchoring
Compact design
View Complete Details

Wilo -Economy MHIL

Design

Non-self-priming multistage pump

Application

Water supply and pressure boosting
Commerce and industry
Washing and spraying systems
Rainwater utilisation
Cooling and cold water circuits
View Complete Details

Material Handling Automation

We offer integrated and turnkey handling solutions for verious types of processes and line automation Suppport customer in identifying the optimal and most economical handling solution to meet their requirement
Product range includes :

Conveyor system such as roller conveyors, chain conveyors, salt conveyors, overhead conveyors, and belt conveyors.

Intelligent & accurate handling system such as gantry, electrified monorail system, and multi-axis robot.

Special devices such as shuttles, pick & place systems, turn over devices, turn tables, scissor lifts, and vacuume hoists.
View Complete Details

TT12 Digital Totaliser

Digital Totaliser_TT412, TT12

Features
6 Digit Time Totaliserr
Selectable least count
Remote Reset

Size : 36mm X 72 mm, 48 mm X 96 mm
View Complete Details

Manual Hydraulic Drum Lifter And Tilter

Manual Hydraulic Drum Lifter and Tilter
Model DDLT- 3
Capacity : 300 kg

Silent in operation
Easy to operate
Light and manoeuvrable
Minimum maintenance
Economical
Compact
Versatile
View Complete Details

Air Cooled Reciprocating Compressor

40,000 - 2 Lakh /Piece Get Latest Price
  • Type Reciprocating Air Compressor
  • Material Aluminium, Carbon Steel, Cast Iron, Matel, Steel
  • Certification CE Certified, ISO 9001:2008
  • Color Black, Blue, Dark Grey, Grey, Metallic, Silver
  • Voltage 110V, 220V, 380V, 440V, 525V
  • Condition New, Old
  • Automatic Grade Manual, Semi Automatic
  • Power Source Electric, Solar
  • Pressure Medium Pressure, High Pressure, Low Pressure
  • Feature Auto Controller, Auto Cut, Durable, High Performance, Low Maintenance, Sensor Controlled, Shocked Proof, Stable Performance
  • Warranty 1Year, 2Years, 6months
  • Configuration Air Compressor, Portable
View Complete Details

Torque Wrenches

6,000 - 1 Lakh /Piece Get Latest Price
  • Type Torque Wrench
  • Material Cast Steel, Iron, Metal, Mild Steel, Stainless Steel
  • Color Black, Grey, Silver, Yellow
  • Surface Finishing Non Polished, Polished
  • Application Constructional Fittings, Domestic Fittings, Industrial Fittings
  • Handle Material Rubber, Neoprene Rubber, Ntrile Rubber
  • Feature Best Quality, Easy To Use, Fine Finished, Foldable, High Durability, High Performance, High Tensile Strength, Light Weight, Rust Free Nature
View Complete Details

Air Chain Hoist

20,000 - 1 Lakh /Piece Get Latest Price
  • Type Chain Hoist
  • Certification CE Certified
  • Voltage 110V, 220V, 380V, 440V
  • Condition New, Used
  • Application Construction Use, Weight Lifting
  • Automatic Grade Automatic, Fully Automatic, Manual, Semi Automatic
  • Driven Type Electric
  • Warranty 1year, 2years, 5years
View Complete Details

THE UNIQUE TANDACO BEARING SYSTEM

The Hurricane incorporates the Tandaco double row heavy duty ball bearing system manufactured to perform for a lifetime It is secured into a reinforced bearing holder with variable length buttresses designed to stabilise the turbine at all wind speeds. The bearing is completely isolated from corrosive environmental conditions by its location between the dome and top diaphragm . The Tandaco bearings is a precision ground spindle bearing with a double row ball bearing cage.
View Complete Details

Impact Wrenches

10,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Impact Wrenches
  • Certification CE Certified
  • Application Components Casing
  • Color Black, Blue, Brown, Green, Grey, Red, White, Yellow
  • Voltage 240V
  • Condition New, Used
  • Automatic Grade Manual, Semi Automatic
  • Power Source Electric
  • Warranty 1 Year, 2 Years, 5 Years
View Complete Details

INTRODUCING THE HURRICANE TURBINE VENTILATOR

The installation of Hurricane Turbine Roof Ventilators will provide an efficient and cost effective systems of natural ventilation. Designed in Australia for a harsh environment, the Hurricane is suited for industrial, commercial and community buildings. It has also passed the requirements of the low speed Dynamic Rain Penetration Test (3 lm at 57.4 kmhr)
View Complete Details

APFC147 Automatic Power Factor Controller

Display Type : 7 segment LED
Display Configuration : 4 digits, 1 row
Input type : L-NL - L
Accurancy : Power factor : 0.01
Measurement Range : Power factor : 0.8 to -0.8
CT Primary : 15A to 9999A
CT Secondary : 1 to 5A
Supply Voltage : 90 to 550V AC
Size : 144 X 144 mm
Mounting Type :Panel Mount
View Complete Details

Diesel Engine

Diesel engine operated trolley mounted power pack with single acting traversing jacks for Railways

Capacity : 5.5 HP x 70 L

Working Pressure : 350 bar

Controls : Hand lever valve with load holding feature.
4 station valve manifold for flow control
View Complete Details

Light Weight

Light weight power pack unit for jack operation

Capacity : 3 HP x 25 L

Working Pressure : 700 bar

Controls : Hand lever valve with load feature
View Complete Details

Compact Light

Compact light weight power pack unit

Capacity : 0.75 HP x 10 L

Working Pressure : 50 bar

Controls : Solenoid operated directional control valve.
View Complete Details

Standard Power

Standard power pack for double acting jacks, with pressure holding

Capacity : 5HP x 40 L

Control : Hand Lever

Working Pressure : 700bar

Distributor for parallel operation of 2 cylinders

Standard Power Pack
View Complete Details

Portable High

Portable high capacity two stage power pack with air oil cooler

Capacity : 30 HP x 40 L

Control : Hand Lever
View Complete Details

Compact Customized

Compact customized mobile power pack for cylinder testing

Capacity : 5 HP x 50 L

Control : Hand Lever

Working Pressure : 300 bar
View Complete Details

Portable Power

Portable power pack for machine tool application with variable delivery pump and oil cooler

Capacity : 20 HP x 200 L

Working Pressure : 140 bar
View Complete Details

LT945 Digital Totaliser

Digital Totaliser_LT945

Features
8 Digit LCD Time Totaliser
Self Powerd
Long battery Life
Contact Voltage Input

Size : 116 DIN 48mm X 48 mm
Certifications :
View Complete Details

Tonnage Cylinders

Tonnage Cylinders
Large size high tonnage cylinders for filter presses

Bore Size : 145 mm to 480 mm

Stroke : 500 to 2200 mm

Working Pressure : 380 bar

Construction : Welded end cap and bolted seal box
View Complete Details

Quick Exaust Cylinder

Cylinder with Quick Exaust
Large size cylinder with quick exaust pre-fill valve

Capacity : 700 ton

Max. Test Pressure : 550 bar
View Complete Details

Outrigger Cylinder

Outrigger cylinder for truck support

Capacity : 6ton

Stroke : 330mm

Working Pressure: 180 bar
View Complete Details

Worm Gears Transmission Torque

Worm Gears
Transmission Torque: 13 . 9200 Nm
Mechanical Rating (n = 1400 mln): 0.04 . 75kW
Gear ratios:= 7. 10000

A smart design enhanced by latest materials technology and
advanced manufacturing.

Wormgears of the VF and W series are milestones for the industry worldwide. They succeeded in combining uncompromising quality with state-of the art technology and renown price effectiveness. Absolute flexibility is given by the wide choice of several mounting options, shaft configurations and motor interfaces, all offered as standard. The helical-worm and the double-worm versions, with or without the torque limiter, also add up, creating a highly versatile drive system.
View Complete Details

A Series Helical-bevel Gearmotors

Helical-bevel Gearmotors
Torque range: 140 . 14000 Nm
Mechanical Rating (n = 1400 min": 0.22 . 150kW
Gear ratios:= 5.4 . 1715

When efficiency and versatility meet each other.

The A series is the product to prove equally good in regard to efficiency and versatility within a highly com petitive context, both performance - and price - wise.
View Complete Details

AS Series Helical Gearmotors

In-line Helical Gearmotors

Transmission Torque: 25 . 6800 Nm
Mechanical Rating (n, = 1400 mln") : Up to 132kW
Gear ratios: in = 4.34 . 202.1
Performance and price
Effectiveness Alngside Tradition

The dependable and performing solution for all in-line drive applications featuring unsurpassed Quality to price ratio. Foot or flange mounting are possible in any mounting positio, making the installation easier than ever
View Complete Details

Planetary Drives Torque

Planetary Drives
Torque range: 1250 . 12, 86, 700 Nm
Mechanical Rating (n, = 1400 min): up to 450kW
Gear ratios: in = 3.4 . 5040

A powerful solution to heavy duty drive needs.
Compact, and yet extremely powerful, are the units of the 300 series. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule than the exception. The product configuration is highly versatile, due to largely modular option options as far mounting, the gear layout, the output shaft and th motor interface. All features are available for each of the 20 closely spaced frame sizes, spanning over the 1250 - 12, 86, 700 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish, it is something users can safely rely on - always.
View Complete Details

LT920 Digital Totaliser

Digital Totaliser_LT920

Features
8 Digit LCD Time Totaliser
Self Powerd
Long battery Life
Contact Voltage Input

Size : 132 DIN 24mm X 48 mm
Certifications :
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Nilesh Chandak (Skyline Distributor)
  • Plot No. 24, Gut No. 23, Beside Cosmo Film, Waluj Midc, Aurangabad, Maharashtra - 431136, India
  • Share us via
DM High torque Enhanced Seal Retailer from Aurangabad, Maharashtra
Post Buy Requirement
SD
Aurangabad, Maharashtra, India
Add Review

Our Products

  1. Industrial Pump 4 Products available
  2. Trucks 4 Products available
  3. Hydraulic And Pneumatic Cylinders 5 Products available
  4. Valves & Valve Fittings 4 Products available
  5. Industrial Valves 7 Products available
  6. Coupling 18 Products available
  7. Servo Motors 3 Products available
  8. Power Packs 5 Products available
  9. Others 75 Products available

Other Products / Services

DM High Torque

DM High torque capacity yet compact direct mounting design, suitable for backstopping applications
Available in a wide range of sizes, from 125 to 513
View Complete Details

Enhanced Seal

Enhanced Seal The Renold enhanced seal sprag clutch range of products are based on the standard size range of 1027 to 3500. The design of the clutch includes a Labyrinth seal, preventing the ingress of abrasive dust, grit and moisture making it suitable for use in most hostile environments.
View Complete Details

Series S Shaft Straightening Presses

As the name suggests, these machines are used for straightening shafts. The versatile technology coupled with the compact dimensions make these the most suitable machines for shaft straightening.
View Complete Details

Series M Manually Operated Presses

Series M manually operate presses were launched as a compact low cost systems eliminating the use of electronics. These systems are actuated manually with a hand lever valve and used in areas where only basic functionality is required and use of electronics is not preferred.
View Complete Details

Torque Limiter

Torque Limiter The Renold sprag clutch torque limiter device is designed for use on applications where overload conditions are to be restricted to a design limit.
View Complete Details

Compact C Frame Presses

Compact C-Frame presses are specially designed for small components requiring limited spaces. This not only reduces the initial investment but also the space requirement of the machine thus making small manufacturing cell possible. These compact and low cost c-frame presses are ideally suited for small size jobs such as automotive cable crimping, hose pipe end fitting crimping, stamping etc.
View Complete Details

Low Height Jacks Plain Ram

  • Caution Provide a level and solid support for entire jack base since the ram guide length is small.
Low profile design for use in confined area.

Used in Power and Steel Plants, Ship building Ship repair and Construction.

Higher capacity and customize solutions on request.

Specifications are subject to change due to continual improvement.

Capacity and Stroke specified are maximum safe limits. As safe, practice use at 80% of rating.
View Complete Details

Pancake Jacks Plain Ram

  • Caution Provide a level and solid support for entire jack base area since the ram guide length is small
Application

Used in confined area with extremely low clearence.

Ideally suited for precision lifting, alignment of machinery, heavy structures and removal of pulleys sprockets on taper seats.

Higher capacity and Stroke specified are maximum safe limits. As safe, practice use at 80% of rating.
View Complete Details

IR Tool Hoist

MLK Series and HLK Series
0.25 to 6 metric ton lifting capacities

Features

MLK Series
The Ingersoll Rand MLK family of hoists id suitable for A5H5 severe-duty use in the 0.25 to 1 metric ton range. The MLK Series is designed to be used as a high-speed protaction habit; the MLKS* is better suited for slow-speed spotting.

HLK Series
The HLK Series incorporates a larger chain wheel to accommodate 38" diameter chain and a lower gear ratio to handle increased load capacities. HLK Series hoist capacities range from 1 to 6 metric tons and are severe-duty rated.Refer to the trolley section on page 61 for plain, and motorized trolleys.
View Complete Details

Series N - Hydro Pneumatic Press

The latest N series Hydro-Pneumatic Presses are available in the following configurations as standard options. The 2 Colum, 4 Colum or C-Frame type can be selected depending on the job being done, component size, auto manual loading etc. Moreover, Mercury also customizes the bed size of the machine to suit customer, die sizes or special requirements.
View Complete Details

Air Boosters

It is not unusual that, during some applications the thrust generated by a pneumatic system is not sufficient for a specific purpose that it has been designed for. In order to get a higher output pressure, the inlet pressure needs to be increased which in some cases may require to be higher that the shop line pressure. It is in those situations that MERCURY Air Boosters are the ideal solution to generate the desired outcome.
View Complete Details

Submersible Sewage Pump

  • Features Stationary / portable installation • Dry/ wet pit installation • With/ without macerator • Mixer head for agitation • With/without ceram coating for aggressive liquids Etc
  • Technical Data Qmax : 8000 m3/hr • Hmax : 100 m • Temperature: up to 60°C • Delivery Size: DN 32 - DN 600
Design

Vertical submersible sewage pumps
Stage: Single
Non clog (free flow single multi channel) impeller
Large free passage size up to 200 mm double mechanical seal
Oil barrier chamber with float switch winding bearing temperature indicators moisture sensor

Application

Municipal raw sewage transfer
Sewage treatment plants
Effluent treatment plants
Dirty water in industry
View Complete Details

Prssure Boosting System

Design

Prssure boosting system with 2 to 6 parallel-switched, non self-priming stainless steel high- pressure multistage centrifugal pumps

Application

Fully automatic water supply and pressure boosting in residential, commercial and public buildings, hostals, hospitals, department stores and industrial systems.
Pumping of drinking water and process water, cooling water, fire water (apart from fir- extinguishing systems in accordance with DIN 14462 and with the approvel of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fiber constituents.
View Complete Details

Rail System

Zimmerman Series Rail Systems
Components :
Safty first
The primary and vital concern of Ingersoll Rand is safty.
Deflection - Ingersoll Rand rail is designed to not exceed 1450 of span, in accordance with ANSI B30.11 monorail and underhuge cranes
Safety cables - WE require the use of safety cable at all moving (hanger and end-truck) suspension points
Redundant end stop - Available for extra safety
Load ratings - Clearly makred on both sides of bridge cranes
Safety - All hardware components are rated at a 5 to 1 safety factor based on meticulous tests performed at testing laboratories.
View Complete Details

Pneumatic Grease Dispensing Pumps

Mercury Pneumatic Grease Pumps are an efficient, low cost alternative to motorized grease pumps and hand operated pumps. They are used for dispensing preset quantity of grease into various machine components such as bearings, shaft assemblies, gear assemblies etc.
View Complete Details

Hand Operated Stacker

HAND OPERATED STACKER
Model - DS - 5815
Capacity:5008001500 kg

Silent in operation
Easy to operate
Light and manoeuvrable
Minimum maintenance
Economical
Compact
Versatile
View Complete Details

Manual Hydraulic Lift Table

Manual Hydraulic Lift Table
Capacity : 500800 kg

Effortless operation
Robust stability
Firm anchoring
Compact design
View Complete Details

Battery Operated Stackers

BATTERY OPERATED STACKERS
Model - DPS-101215
Capacity: 100012001500 kg

Silent in operation
Easy to operate
Light and manoeuvrable
Minimum maintenance
Economical
Compact
Versatile
View Complete Details

Hydraulic Dock Leveler

HYDRAULIC DOCK LEVELER SPECIFICATIONS
Model - DHD-30-90
Capacity: 30009000 kg

Quality Dock Leveler
Easy to Install and Operate
Long Lasting
Safe
View Complete Details

Paper Roll Pallet Truck Version / Beam

Paper Roll Pallet Truck Version Beam
Capacity : 2500 kg

Easy to operate
Silent in operation
Requires minimum pulling power
No oil leakage
Minimum maintenance
Maximum manoeuvrability
View Complete Details

HDO - Bevel Helical Gear Reducer

The new bevel helical gear reducer series from Bonfiglioli optimises superior performance with compact dimensions and flexibility. The several options that can be selected from the catalogue facilitate customization to meet specific application requirements, Gear case from nodular cast iron guarantee rigidity in all circumstances while gears, integrally ground finished on there profile, ensure quite and vibration-free operation even in the harshest conditions.
View Complete Details

HDP Gear Box

Toque rating consistently high, gear ratios in close progression, numerous mounting options along with compact dimensions will ease the engineering of any application. The housing from nodular cast iron ensures robustness even in the hardest environment and the class of precision the gear are machined into helps producing an extremely quite and vibration-free operation.
View Complete Details

Hydraulic Scissor Lift Tables

HYDRAULIC SCISSOR LIFT TABLES
Model - DLT-5102030
Capacity: 500100020003000 kg

Effortless operation
Robust stability
Firm anchoring
Compact design
View Complete Details

Wilo -Economy MHIL

Design

Non-self-priming multistage pump

Application

Water supply and pressure boosting
Commerce and industry
Washing and spraying systems
Rainwater utilisation
Cooling and cold water circuits
View Complete Details

Material Handling Automation

We offer integrated and turnkey handling solutions for verious types of processes and line automation Suppport customer in identifying the optimal and most economical handling solution to meet their requirement
Product range includes :

Conveyor system such as roller conveyors, chain conveyors, salt conveyors, overhead conveyors, and belt conveyors.

Intelligent & accurate handling system such as gantry, electrified monorail system, and multi-axis robot.

Special devices such as shuttles, pick & place systems, turn over devices, turn tables, scissor lifts, and vacuume hoists.
View Complete Details

TT12 Digital Totaliser

Digital Totaliser_TT412, TT12

Features
6 Digit Time Totaliserr
Selectable least count
Remote Reset

Size : 36mm X 72 mm, 48 mm X 96 mm
View Complete Details

Manual Hydraulic Drum Lifter And Tilter

Manual Hydraulic Drum Lifter and Tilter
Model DDLT- 3
Capacity : 300 kg

Silent in operation
Easy to operate
Light and manoeuvrable
Minimum maintenance
Economical
Compact
Versatile
View Complete Details

Air Cooled Reciprocating Compressor

40,000 - 2 Lakh /Piece Get Latest Price
  • Type Reciprocating Air Compressor
  • Material Aluminium, Carbon Steel, Cast Iron, Matel, Steel
  • Certification CE Certified, ISO 9001:2008
  • Color Black, Blue, Dark Grey, Grey, Metallic, Silver
  • Voltage 110V, 220V, 380V, 440V, 525V
  • Condition New, Old
  • Automatic Grade Manual, Semi Automatic
  • Power Source Electric, Solar
  • Pressure Medium Pressure, High Pressure, Low Pressure
  • Feature Auto Controller, Auto Cut, Durable, High Performance, Low Maintenance, Sensor Controlled, Shocked Proof, Stable Performance
  • Warranty 1Year, 2Years, 6months
  • Configuration Air Compressor, Portable
View Complete Details

Torque Wrenches

6,000 - 1 Lakh /Piece Get Latest Price
  • Type Torque Wrench
  • Material Cast Steel, Iron, Metal, Mild Steel, Stainless Steel
  • Color Black, Grey, Silver, Yellow
  • Surface Finishing Non Polished, Polished
  • Application Constructional Fittings, Domestic Fittings, Industrial Fittings
  • Handle Material Rubber, Neoprene Rubber, Ntrile Rubber
  • Feature Best Quality, Easy To Use, Fine Finished, Foldable, High Durability, High Performance, High Tensile Strength, Light Weight, Rust Free Nature
View Complete Details

Air Chain Hoist

20,000 - 1 Lakh /Piece Get Latest Price
  • Type Chain Hoist
  • Certification CE Certified
  • Voltage 110V, 220V, 380V, 440V
  • Condition New, Used
  • Application Construction Use, Weight Lifting
  • Automatic Grade Automatic, Fully Automatic, Manual, Semi Automatic
  • Driven Type Electric
  • Warranty 1year, 2years, 5years
View Complete Details

THE UNIQUE TANDACO BEARING SYSTEM

The Hurricane incorporates the Tandaco double row heavy duty ball bearing system manufactured to perform for a lifetime It is secured into a reinforced bearing holder with variable length buttresses designed to stabilise the turbine at all wind speeds. The bearing is completely isolated from corrosive environmental conditions by its location between the dome and top diaphragm . The Tandaco bearings is a precision ground spindle bearing with a double row ball bearing cage.
View Complete Details

Impact Wrenches

10,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Impact Wrenches
  • Certification CE Certified
  • Application Components Casing
  • Color Black, Blue, Brown, Green, Grey, Red, White, Yellow
  • Voltage 240V
  • Condition New, Used
  • Automatic Grade Manual, Semi Automatic
  • Power Source Electric
  • Warranty 1 Year, 2 Years, 5 Years
View Complete Details

INTRODUCING THE HURRICANE TURBINE VENTILATOR

The installation of Hurricane Turbine Roof Ventilators will provide an efficient and cost effective systems of natural ventilation. Designed in Australia for a harsh environment, the Hurricane is suited for industrial, commercial and community buildings. It has also passed the requirements of the low speed Dynamic Rain Penetration Test (3 lm at 57.4 kmhr)
View Complete Details

APFC147 Automatic Power Factor Controller

Display Type : 7 segment LED
Display Configuration : 4 digits, 1 row
Input type : L-NL - L
Accurancy : Power factor : 0.01
Measurement Range : Power factor : 0.8 to -0.8
CT Primary : 15A to 9999A
CT Secondary : 1 to 5A
Supply Voltage : 90 to 550V AC
Size : 144 X 144 mm
Mounting Type :Panel Mount
View Complete Details

Diesel Engine

Diesel engine operated trolley mounted power pack with single acting traversing jacks for Railways

Capacity : 5.5 HP x 70 L

Working Pressure : 350 bar

Controls : Hand lever valve with load holding feature.
4 station valve manifold for flow control
View Complete Details

Light Weight

Light weight power pack unit for jack operation

Capacity : 3 HP x 25 L

Working Pressure : 700 bar

Controls : Hand lever valve with load feature
View Complete Details

Compact Light

Compact light weight power pack unit

Capacity : 0.75 HP x 10 L

Working Pressure : 50 bar

Controls : Solenoid operated directional control valve.
View Complete Details

Standard Power

Standard power pack for double acting jacks, with pressure holding

Capacity : 5HP x 40 L

Control : Hand Lever

Working Pressure : 700bar

Distributor for parallel operation of 2 cylinders

Standard Power Pack
View Complete Details

Portable High

Portable high capacity two stage power pack with air oil cooler

Capacity : 30 HP x 40 L

Control : Hand Lever
View Complete Details

Compact Customized

Compact customized mobile power pack for cylinder testing

Capacity : 5 HP x 50 L

Control : Hand Lever

Working Pressure : 300 bar
View Complete Details

Portable Power

Portable power pack for machine tool application with variable delivery pump and oil cooler

Capacity : 20 HP x 200 L

Working Pressure : 140 bar
View Complete Details

LT945 Digital Totaliser

Digital Totaliser_LT945

Features
8 Digit LCD Time Totaliser
Self Powerd
Long battery Life
Contact Voltage Input

Size : 116 DIN 48mm X 48 mm
Certifications :
View Complete Details

Tonnage Cylinders

Tonnage Cylinders
Large size high tonnage cylinders for filter presses

Bore Size : 145 mm to 480 mm

Stroke : 500 to 2200 mm

Working Pressure : 380 bar

Construction : Welded end cap and bolted seal box
View Complete Details

Quick Exaust Cylinder

Cylinder with Quick Exaust
Large size cylinder with quick exaust pre-fill valve

Capacity : 700 ton

Max. Test Pressure : 550 bar
View Complete Details

Outrigger Cylinder

Outrigger cylinder for truck support

Capacity : 6ton

Stroke : 330mm

Working Pressure: 180 bar
View Complete Details

Worm Gears Transmission Torque

Worm Gears
Transmission Torque: 13 . 9200 Nm
Mechanical Rating (n = 1400 mln): 0.04 . 75kW
Gear ratios:= 7. 10000

A smart design enhanced by latest materials technology and
advanced manufacturing.

Wormgears of the VF and W series are milestones for the industry worldwide. They succeeded in combining uncompromising quality with state-of the art technology and renown price effectiveness. Absolute flexibility is given by the wide choice of several mounting options, shaft configurations and motor interfaces, all offered as standard. The helical-worm and the double-worm versions, with or without the torque limiter, also add up, creating a highly versatile drive system.
View Complete Details

A Series Helical-bevel Gearmotors

Helical-bevel Gearmotors
Torque range: 140 . 14000 Nm
Mechanical Rating (n = 1400 min": 0.22 . 150kW
Gear ratios:= 5.4 . 1715

When efficiency and versatility meet each other.

The A series is the product to prove equally good in regard to efficiency and versatility within a highly com petitive context, both performance - and price - wise.
View Complete Details

AS Series Helical Gearmotors

In-line Helical Gearmotors

Transmission Torque: 25 . 6800 Nm
Mechanical Rating (n, = 1400 mln") : Up to 132kW
Gear ratios: in = 4.34 . 202.1
Performance and price
Effectiveness Alngside Tradition

The dependable and performing solution for all in-line drive applications featuring unsurpassed Quality to price ratio. Foot or flange mounting are possible in any mounting positio, making the installation easier than ever
View Complete Details

Planetary Drives Torque

Planetary Drives
Torque range: 1250 . 12, 86, 700 Nm
Mechanical Rating (n, = 1400 min): up to 450kW
Gear ratios: in = 3.4 . 5040

A powerful solution to heavy duty drive needs.
Compact, and yet extremely powerful, are the units of the 300 series. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule than the exception. The product configuration is highly versatile, due to largely modular option options as far mounting, the gear layout, the output shaft and th motor interface. All features are available for each of the 20 closely spaced frame sizes, spanning over the 1250 - 12, 86, 700 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish, it is something users can safely rely on - always.
View Complete Details

LT920 Digital Totaliser

Digital Totaliser_LT920

Features
8 Digit LCD Time Totaliser
Self Powerd
Long battery Life
Contact Voltage Input

Size : 132 DIN 24mm X 48 mm
Certifications :
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Nilesh Chandak (Skyline Distributor)
  • Plot No. 24, Gut No. 23, Beside Cosmo Film, Waluj Midc, Aurangabad, Maharashtra - 431136, India
  • Share us via