Kolkata, West Bengal, India
Our Products
Auto Sensor Doorare also calledAirport Door, commonly used in shopping malls, office, hospitals etc. It isIR sensor operated door, when people approaches the door, it automatically open and closes. Normally it is 4.2 meter wide door in 4 parts or 1 meter each ( two fixed panels and two moving panels) and gives clear opening os 2 meter. WiderAuto GLASS SENSOR DOORare also available in market.
There are various types of Auto Sensor Door available -
1) Sliding Sensor Door
2) Swing Sensor Door
3) Revolving Sensor Door
4) Telescopic Sensor door
Auto Swing Doorare mainly used in Offices, corridors of Hospitals, schools etc. It is mainly used where there is a lack of sliding space. these Motors can be actuated by motion sensors, hand scanners, remote controllers or ordinary switch.
Single Leaf and Double Leaf models are available.
Applications: Can be used where the user does not want to physically touch the door for opening, or close it immediately when opened. For example, it can be used in washrooms/malls/executive offices, etc. There is a provision of remote locking - user can lock or unlock the door with a remote.
Central Motors are used in Rolling Shutters upto 200 sq feet. It can be operated by remote control and ordinary switch. During power fail, it allows to operate the rolling by hand.
Fitted at the Center of Spring System Suitable for up to 280 Kg Rolling Door Manual Operation on Power Fail Clutch Key for Locking (Optional) 100% safety due to Spring System Re-mote Control (Optional).
UHD RFID Entrance Solutions- are popular in housing complex, Industry etcwhere many vechicles enter & exit in the complexdaily. In this system UHF RFID ( Ultra High FrequencyRadio frequency Identification) Cards / or Tags / or Stickers are pasted on the Vehicle wind screen. One UHF Reader is mounted at the Entry & Exit Gates. These readers can read the UHD Cards / stickers / tags from 1012 meter distanceand OPENS the Gate. This system avoids physical verification ofregistered vehicles
Awnings are used as a temporary shade in outdoor. It is made of waterproof pvc type of cloth. It can be of many types-
It can be operated manually or motorized (can operate with electric switch or remote control)
Highway Toll Management System is used to collect toll in highways. It uses latesttechnology to STOP leakage in Toll collection. Its features are -
1) Computerised Toll collection.
2) Vehicle Image Capture
3) Vehicle no capture
4) Automatic Vehicle classifier
5) Reports in Real time
Telescopic Auto Door used where large opening are needed. It can provide 66% openings, whereas ordinary glass sensor door provide less than 505 openings. It is made of dual track system
There are various types of Auto Sensor Door available -
1) Sliding Sensor Door
2) Swing Sensor Door
3) Revolving Sensor Door
4) Telescopic Sensor door
Smartpower Motorized Vertical Louvres are cuistomised in nature, multiple vertical louvers (say 6 nos) or each upto 2 feet wide and 10 feet height can be used to rotate 45 degree / 90 degree / 180 degree / or any arbitrary degree.
Barrier Gate are used in Car Parking Solutions, Toll Plaza, Malls, Amusement Parks, Hospitals etc. Its Boom arm can be upto 8 meter wide and can Open and Close in 1 to 8 sec. It is waterproof, IP 55 for outdoor use. Many models like Straight Arm, Fencing arm, Folding arm etc are available. These Barrier gates are fully compatible with Access Control systems.
Retractable gates are also called collapsible gates, they are mainly used where large openings are needed. It is made of stainless steel or aluminum. It can give upuo 77% clear openings. the normal height of these gates are 12 meters. the standrad height is 1.6 meters.
The motors speed is 15 Mt / min Open Time .
They are used as movable remote controlled fencing options. Can be used to cover up or surround a large area in a very short time. The broad build makes it difficult to cross or tamper with. They are available in two types - with or without rail lines. Depending on the customer'srequirement. The Stainless steel bodies provide strength and integrity for outdoor operations. Retractable gates can be fitted with Alarm lights or sound - so that people around are alerted while the gate is in operation.
Tubulor Motors are used in small size rolling shutters up to 100 sq feet. It removes traditional spring system and uses a 80 mm hollow pipe. The motor is inserted in the 80 mm pipe and can be operated by a remote or switch.
Auto Revolving Doorare mainly used in Shoppimg Malls, Hotels and offices. Ordinaryglass sensor doorcannot maintain 100% isolation between inside and outside air, whichresult in huge air conditon loss in summer or heat loss during winter.
Revolving doorsprovide full isolation between inside and outside of a building door. They are available in 3 or 4 wings model. At a time only 2 wings are open to outside and hence isolation is maintained.
Its structure is made on stainless steel or aluminum, the normal door diameter is .6 3 Meter diameter and 2.2 Meter height with300mm canopy. It also has German SEC Motor with Panasonic controller European Sensors Heavy duty 24 hr x 365 days operation Available in 3 / 4 wings Aluminum & SS#304 frame with Toughen Glass.
Motorised Curtain up to 20 feet Can Operate with Remote + Switch + Manual Operation Automatic Operation on Hands touch Automatic Limit Switch available Special silent operation
hermetically sealed auto Hospital Doors used in Operation Theatres. It allows to maintain clear air inOperation Theatres. When the doctor to operation inside the door is locked, when the doctors wants to go out, they can open the door with foot sensor.
It is made of stainless steel / aluminum hermiatically sealed door.
Card Dispensersare used in Parking Entry Gate to issue card automatically to the visitor. When the vehicle / visitor arrives on the Loop detector, it greets the visitor with welcome sound prompt. On PRESSING button the PARKING CARD come out automatically. It can be interfaced with RFID sensor also. When the Card comes out, The Gate OPEN automatically. It also have LOW Card alarm. It can store 250 cards or more.
Hogh speed PVC auto rolling doors are mainly used in Food, paint, phrama etc industry. These are used in a pair to maintain clean air. These door can open and close in less than 5 sec. It is operated by high speed motors.
PIR Motions Sensor ( Pyro Electric Motions sensors) sensesInfra Red heat sensor emitted from human body. When the human being moves on, the head waves emiited by their body changes the Infra Red wave gradient, this change is detected by the PIR Motion sensor (also calledsmart switch) and activates a relay. This relay switches ON /OFF a Light or FAN or Alarm etc.
These sesnors also havebuiltin LUX( Luminance intensity of light) controlswitch, according to which it works. The LUX sense can vary from 20 LUX( extreme dark) to 20000 Lux( bright sun light). The Smart switch can be operated as per the need. It can be set to Switch On light only after sunset and switch OFF light after sun rise.
These smart switch also havesensitivity parameter adjustment, so that the relay is not operated by a moving rat or butterfly or cat. It is set in the manner so that a Dog of atleast 20 kg ( similar to the weight of a small child) is required to sense the relay.
PIR sensor can be of many types -
A) Wall Mounted PIR sensor - can sense from 12 meter distance in 120 degree angle.
B) Ceiling mounted PIR sensor - can sense from 34 meter in 360 degree 3 meter diameter.
In addition to the above, water proof model, out door models etc are avaibale in variour size and l
Smartpower DOOR ACCESS CONTROL SYSTEM is allows selective Entry of people vide RFID Access Control Card or Digital Keypad . It also allows Entry or Exit vide Remote Control . EXIT is allowed by a Manual PUSH Switch also.For smooth operation of the system 24 hour power is needed.
RFID ACCESS CONTROL (Picture 2) as shown below is a control system whichallows selective Entry of people vide RFID Access Control Card or Digital Keypad. It also have provision to connect Door Bell so that when the unknown visitor comes, the people inside can decides and can open the door from inside by Remote or EXIT Push switch.
CCTV (Closed Circuit Television) means a system where something can be seen in television is a closed circuit (means in a specified area) not everything in the world where, anything can be broadcast over different channels.
With development of technology, people wanted to see more pictures in 1 TV screen, so a switcher was developed, which can show 4 pictures in TV one by one / or by QUAD switcher which can show all 4 pictures in 1 screen.
CAMERA
Indoor Dome Camera
The indoor dome camera is used in 90% of general indoor applications. It comes in a variety of configurations including standard color, Day/Night, and Infrared versions. It can be mounted on a horizontal or vertical surface but is typically ceiling mounted. Lens options on dome camera may restrict their use in certain applications such as requiring more than a 20mm video lens. Dome cameras are a primary choice in indoor camera locations.
Outdoor Dome Cameras
Outdoor Dome Cameras are typically hard shell vandal-roof casings that offer the same versatility in a variety of lens options. Day/Night outdoor dome cameras are common in applications that have entry and exit points with limited lighting during the night.
Day/Night Camera
The Day/Night camera is the best choice for low-light conditions. The cameras are standard color during daylight conditions, the Day/Night camera switches either digitally of mechanically to a low-lux B/W mode.
Infrared Camera
During No-Light conditions, Infrared cameras provide infrared illumination of the FoF allowing monitoring of areas with no light available. Te IR LEDs are automatically illuminated and the camera switched to the B/W low-lux mode offering camera views in total darkness.
PTZ Camera
Pan-Tilt-Zoom camera offer the ability to view in all directions and optically zoom in as required. PTZ cameras also include standard color, Day/Night modes, and a few IR PTZ cameras have been introduced recently. The CCTV operator can set the PTZ cameras to automatically rotate to different FoVs. Options include Auto-tracking applications that dynamically track objects in defined areas.
Digital Video Recorders
All Cameras are connected to Digital video recorder, where data is stored in Hard Disk Drive. The DVR output is finally connected to TV / PC Monitor etc. The quality of picture on TV depends upon the resolution of DVR. DVR are also connected to MODEM through Cat 6 cable ( LAN network), and finally the pictures are transmitted to internet via MODEM. These pictures / video can be seen from anywhere in the world on cellphone / PC etc.
Auto swing gate motorshave been prevalent in the west for the last decade and now it's coming to India. Consists of two extended, synchronized, arms that are attached on the two flaps of your existing swing gate.
ARM type Swing Gate Operatorsare widely used in Gate Automation. Suitable for upto 300kg / 3 meter per leaf gates.
CCTV (Closed Circuit Television) means a system where something can be seen in television is a closed circuit (means in a specified area) not everything in the world where, anything can be broadcast over different channels.
With development of technology, people wanted to see more pictures in 1 TV screen, so a switcher was developed, which can show 4 pictures in TV one by one / or by QUAD switcher which can show all 4 pictures in 1 screen.
CAMERA
Indoor Dome Camera
The indoor dome camera is used in 90% of general indoor applications. It comes in a variety of configurations including standard color, Day/Night, and Infrared versions. It can be mounted on a horizontal or vertical surface but is typically ceiling mounted. Lens options on dome camera may restrict their use in certain applications such as requiring more than a 20mm video lens. Dome cameras are a primary choice in indoor camera locations.
Outdoor Dome Cameras
Outdoor Dome Cameras are typically hard shell vandal-roof casings that offer the same versatility in a variety of lens options. Day/Night outdoor dome cameras are common in applications that have entry and exit points with limited lighting during the night.
Day/Night Camera
The Day/Night camera is the best choice for low-light conditions. The cameras are standard color during daylight conditions, the Day/Night camera switches either digitally of mechanically to a low-lux B/W mode.
Infrared Camera
During No-Light conditions, Infrared cameras provide infrared illumination of the FoF allowing monitoring of areas with no light available. Te IR LEDs are automatically illuminated and the camera switched to the B/W low-lux mode offering camera views in total darkness.
PTZ Camera
Pan-Tilt-Zoom camera offer the ability to view in all directions and optically zoom in as required. PTZ cameras also include standard color, Day/Night modes, and a few IR PTZ cameras have been introduced recently. The CCTV operator can set the PTZ cameras to automatically rotate to different FoVs. Options include Auto-tracking applications that dynamically track objects in defined areas.
Digital Video Recorders
All Cameras are connected to Digital video recorder, where data is stored in Hard Disk Drive. The DVR output is finally connected to TV / PC Monitor etc. The quality of picture on TV depends upon the resolution of DVR. DVR are also connected to MODEM through Cat 6 cable ( LAN network), and finally the pictures are transmitted to internet via MODEM. These pictures / video can be seen from anywhere in the world on cellphone / PC etc.
Universal RF (Radio frequency 433.92Mhz) Remote Controller & Receiver are used in Door & Gate Automation. This can be used in
Rolling Shutters - Tubulors motors
Rolling Shutters - Side motros
Rolling Shuters - Central Motors
Sliding Gate Motors
Swing Gate Motors
Boom Barriers
Curtins & Blinds
Side Motorsare used in heavy duty rolling shutters upto 1500 sq feet. There are two type os side motors. they can operate with remote control and electric switch. During power fail chains are used to open the door.
A) Chain type - are commonly used in all rolling suhtters motorization purpose.
B ) Gear type - are more reliable but not flexible in practical applications.
Biometric Attendance Systems are mainly used to maintain attendance of employee in an office. It is also used for other places as security access control device. Only people with registered thumb impression on the system are allowed access to secured places.
Smartpower Access control systems allow various types of registration methods. There is face recognition, RFID card recognition, Finger print sensing, or password unlock. Everything built in one device. Operation is fast - the system detects and functions in a fraction of a second. Much shorter time delay as compared to any other product in the segment. For better results, integrate the smartpower access control system with the smart door lock in your office to create a zone of restricted and controlled access. Every individual gets verified and the data gets stored in the system for future use.
Sliding Gate Operatorare specially designed Motors to operate Sliding Gates.It can be operated electrically and operated by switch, remote or any other access control system.
Transparent PVC rolling doors are mainly used in shopping malls to display goods 24 hr x 365 days. It is made of PVC slats of size say 300mm x 100 mm each, which are joined through stainless steel pipes.
Wireless Parking Fee Management System- is widely used in Shopping Malls, Bus Stand, Apartment complex, Airport, Railway Station, Public places etc.
In thisRFID card based Parking FEE Management Systemno wires are used between Entry & Exit Gates. Multiple Entry and exit Gates can be controlled by one software. Simple RFID reader is used at Entry Gate and POS system at Exit Gate, both are integrated with Boom Barrier.
The basic features are
a) Wireless System
b) Multiple Entry & Exit fully Integrated
c) Kioks Box with Card Dispensor at Entry & High speed printer with PC at EXIT
d) Multiple type of Vehicle allowed
e) reports of vechile wise / date wise / time wise / operator wise Fee collection
Operation Principal
When the vehicle approaches the parking entry, the vehicle loop detector senses the vehicle and makes system ready, the drives PRESS the push button and takes RFID card from the kiosk. At the same moment the speaker welcomes the driver and the barrier gate opens. After the vehicle enters, the barrier gate closed automatically.
At the Exit Gate the driver shows the card to the EXIT POS (Point of Sale) system. The POS ask for type of vehicle and its vehicle number. The Automatic system calculates the parking FEE, after the FEE is paid, the Barrier Gate Opens and allows the vehicle to exit. Finally the barrier gate closed automatically.
