Our Products
Our range of Phosphor Bronze Castings is widely demanded for features like high strength, low coefficient of friction and fine grain. The range of Phosphor Bronze Castings is appreciated in the market for its features of perfect finish, modular design and smooth edges. Clients can avail the Phosphor Bronze Castings in customization with the details specified by them. Phosphor Bronzes PB1, PB2, PB3 & PB4 are predominantly used for their wear resistance and bearing properties. Bronzes PB1 and PB2 are preferred in the form of heavy duty gears, worm-wheels and bearings for the more critical applications where high working loads, high speeds, impact loading and pounding coupled with adequate lubrication and good alignment are found. Phosphor Bronze PB4 is adequate for the less critical applications. Phosphor Bronze Castings are extensively used in diversified industrial sectors. Highlights
Chemical Composition
Copper Alloys | CU | SN | PB | ZN | FE | NI | P | AL | SI | SB | Impurities |
---|---|---|---|---|---|---|---|---|---|---|---|
PB 1 (Standard: BS 1400) | Rem. | 10 Min | 0.25 | 0.05 | 0.1 | 0.1 | 0.5 Min | 0.01 | 0.02 | 0.6 | |
PB 2 (Standard: BS 1400) | Rem. | 11 - 13 | 0.5 | 0.3 | 0.15 | 0.5 | 0.15 Min | 0.01 | 0.02 | 0.2 | |
PB-4 (Standard: BS 1400) | Rem. | 9.5 Min | 0.75 | 0.5 | 0.5 | 0.4 Min | 0.5 | ||||
Phosphorus Bz Grade-1 (Standard: IS: 28-1985) | Rem. | 6-8 | 0.25 | 0.5 | 0.3 | 0.7 | 0.3-0.5 | 0.01 | 0.02 | 0.1 | 1.2 |
Phosphorus Bz Grade-2 (Standard: IS: 28-1985) | Rem. | 10 Min | 0.25 | 0.25 | 0.1 | 0.1 | 0.5 Min | 0.01 | 0.02 | 0.6 | |
Phosphorus Bz Grade-3 (Standard: IS: 28-1985) | Rem. | 6.5-8.5 | 2-5 | 2 | 1 | 0.3 Min | 0.5 | ||||
Phosphorus Bz Grade-4 (Standard: 28-1985) | Rem. | 9-11 | 0.25 | 0.05 | 0.25 | 0.15 | 0.8 | ||||
Phosphorus Bz Grade-5 (Standard: 28-1985) | Rem. | 11-13.1 | 0.5 | 0.3 | 0.15 | 0.5 | 0.15 Min | 0.01 | 0.02 | 0.2 |
The company is the prime Manufacturer and Supplier of Aluminium Bronze Castings. Manufactured using high grade metals, these Aluminium Bronze Castings are rigorously tested on various parameters to ensure premium quality. The company holds expertise in customizing the Aluminium Bronze Castings range as per the OE specifications and other details provided by our clients. Aluminium casting together with bronze produces alloys which offer high strength coupled with excellent corrosion resistance properties. These Aluminium Bronze Castings are manufactured with using high grade raw materials in compliance with international quality standards. These Aluminium Bronze Castings have a extensive range of uses and classifications such as AB1 and AB2. Typical uses for AB1 are selector forks and levers. AB2 has outstanding resistance to sea water directly due to the thin film of aluminium oxide on the external surface making the Aluminium Bronze Castings particularly suitable for the offshore and marine industry. Typical uses for these Aluminium Bronze Castings are pump impellers, marine propellers, valves, marine engineering, petroleum, oil and chemical industries. Highlights
Chemical Composition
Copper Alloys |
CU |
SN |
PB |
ZN |
FE |
NI |
AL |
MN |
SI |
Impurities |
---|---|---|---|---|---|---|---|---|---|---|
AB-1(Standard: BS 1400 ) |
Rem |
0.1 |
0.05 |
0.5 |
1.5-3.5 |
1 |
8.5-10.5 |
1 |
0.25 |
0.3 |
AB-2 (Standard: BS 1400 ) |
Rem |
0.1 |
0.05 |
0.5 |
4- 5.5 |
4- 5.5 |
8.8- 10 |
1.5 |
1 |
0.3 |
AB-3( Standard: BS 1400 ) |
Rem |
0.1 |
0.03 |
0.4 |
0.5-0.7 |
0.1 |
6- 6.4 |
0.5 |
2 -2.4 |
0.8 |
ALBC-1 (Standard: JIS) |
85-90 |
0.1 |
0.1 |
0.5 |
1- 3 |
0.1- 1 |
8 -10 |
0.1- 1 |
0.1- 1 |
|
ALBC-2 (Standard: JIS) |
80-88 |
0.1 |
0.1 |
0.5 |
2.5- 5 |
1 -3 |
8 -10.5 |
0.1-1.5 |
|
|
ALBC-3 (Standard: JIS) |
78-85 |
0.1 |
0.1 |
0.5 |
3- 6 |
3- 6 |
8.5-10.5 |
0.1-1.5 |
|
|
ALBC-4 (Standard: JIS) |
71-84 |
0.1 |
0.1 |
0.5 |
2- 5 |
1- 4 |
6 -9 |
7 -15 |
|
|
C95400 (Standard:ASTM ) |
83 Min |
0.1 |
0.03 |
0.1 |
3 - 5 |
1.5 |
10 - 11.5 |
0.5 |
|
|
C95500 (Standard:ASTM ) |
78 Min |
0.1 |
0.03 |
0.1 |
3 -5 |
3- 5.5 |
10 - 11.5 |
3.5 |
|
|
C95800 (Standard:ASTM ) |
78 Min |
0.1 |
0.03 |
0.1 |
3.5-4.5 |
4 -5 |
8.5-9.5 |
0.8-1.5 |
0.1 |
|
G-CuAl10Fe (Standard: DIN ) |
83-89 |
0.2 |
0.1 |
0.4 |
2- 3.8 |
2.7 |
8.7-10.7 |
0.8 |
0.1 |
1 |
G-CuAl9Ni (Standard: DIN ) |
82-86.5 |
0.2 |
0.1 |
0.2 |
1- 2.8 |
1.5-3.8 |
8.7-9.8 |
2.3 |
0.07 |
0.8 |
G-CuAl10Ni (Standard: DIN ) |
76-80.5 |
0.1 |
0.03 |
0.2 |
3.5-5.3 |
4.5-6.3 |
9- 10.6 |
2.3 |
0.07 |
0.8 |
G-CuAl11Ni (Standard: DIN ) |
72-77 |
0.1 |
0.03 |
0.2 |
4.3-5.8 |
5.3-6.8 |
9.3-11.3 |
2.3 |
0.07 |
0.8 |
We are prime Manufacturer and Supplier of Manganese Bronze Castings in India. Our Manganese Bronze Castings are made using the finest quality alloys to make ensure they are long lasting and reliable. These Manganese Bronze Castings are corrosion-resistant as well as weatherproof. We can make available the Manganese Bronze Castings in different specifications as per buyer’s demands.
Highlights :
Composition Details :
Our organization manufacturers and supplies a wide range of Manganese Bronze Casting products. Manganese bronze contains small additions of manganese, iron, and aluminum, plus lead for lubricity, anti-seizing, and bonding. Like the aluminum bronzes, they combine high strength with excellent corrosion resistance. Manganese bronze bearings can operate at high speeds under heavy loads, but require high shaft hardness and nonabrasive operating conditions. The various types of manganese bronze are a popular choice for the aerospace, fastener, marine, and oil and gas Industries. Typical applications in these industries include landing gear parts, strut bushings, screw machine parts, bearings, bushings, gears, and lead screw nuts.
Manganese Bronze Casting Table
Element |
Copper |
Tin |
Lead |
Zinc |
Iron |
Nickel |
Aluminium |
Manganese |
---|---|---|---|---|---|---|---|---|
C86200 |
60 - 66 |
0.20 max. |
0.20 max. |
22 - 28 |
2 - 4 |
1 max. |
3 – 4.9 |
2.5 - 5 |
C86300 |
60 - 66 |
0.20 max. |
0.20 max. |
22 - 28 |
2 - 4 |
1 max. |
5 – 7.5 |
2.5 - 5 |
C86400 |
56 - 62 |
0.5 – 1.5 |
0.5 – 1.5 |
34 - 42 |
0.40 - 2 |
1 max. |
0.5 – 1.5 |
0.1 – 1.5 |
C86500 |
55 - 60 |
0.5 - 1 |
0.40 max. |
36 - 42 |
0.4 - 2 |
1 max. |
0.50 – 1.5 |
0.10 – 1.5 |
We are among the prominent Gun Metal Castings Manufacturers and Suppliers all over India. Gun Metal Castings brought forth by the company, are available in various hardness, tensile strengths and dimensions. Gun Metal Castings are manufactured using high grade raw materials in compliance with international quality standards. Gun Metal Castings of our company are widely accepted in different industries for their brilliant surface finish. Gun Metal Castings are highly appreciated by clients for their tolerance capacity, dimensional accuracy and durability. Typical uses of Gunmetal Casting is Pressure tight bearings, bushes, pumps and pump fittings, valves, valve bodies, and valve guides under corrosive marine conditions, Gear and worm wheels, Bearings for aero engines, diesel engines, electrical generators and rolling mills etc. Attributes
Chemical Composition
Copper Alloys | CU | SN | PB | ZN | FE | NI | P | AL | SI | SB | S | BI | Impurities |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LTB-1 (Standard: IS: 318-1981) | Rem. | 6-8 | 2.5-3.5 | 1.5-3 | 0.3 | 2 | 0.01 | 0.01 | 0.3 | 0.7 | |||
LTB-2 (Standard: IS: 318-1981) | Rem. | 4-6 | 4-6 | 4-6 | 0.35 | 2 | 0.01 | 0.02 | 0.4 | 0.8 | |||
LG-1 (Standard: BS 1400) | Rem. | 2-3.5 | 4-6 | 7-9.5 | 0.5 | 2 | 0.03 | 0.01 | 0.02 | 0.25 | 0.08 | 0.1 | 1 |
LG-2 (Standard: BS 1400 | Rem | 4-6 | 4-6 | 4-6 | 0.5 | 2 | 0.01 | 0.02 | 0.05 | 0.8 | |||
LG-4 (Standard: BS 1400) | Rem. | 6-8.05 | 2.5-3.5 | 1.5-3 | 0.2 | 2 | 0.01 | 0.01 | 0.25 | 0.05 | 0.7 | ||
RG-5 (Standard: DIN) | 84-86 | 4-6 | 4-6 | 4-6 | 0.2 | 2 | 0.03 | 0.01 | 0.01 | 0.25 | 0.06 | ||
RG-7 (Standard: DIN) | 83-85 | 6.8-8 | 5.3-7 | 3.3-5 | 0.2 | 1-1.5 | 0.03 | 0.01 | 0.01 | 0.25 | 0.03 | ||
BC-1 (Standard: JIS) | 79-83 | 2 - 4 | 3-7 | 8-12 | 0.35 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
BC-2 (Standard: JIS) | 86-90 | 7 - 9 | 0-1 | 3 - 5 | 0.2 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
BC-6 (Standard: JIS) | 83 - 87 | 4 - 6 | 4 - 6 | 4 - 6 | 0.3 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
BC-7 (Standard: JIS) | 86-90 | 5 - 7 | 1-3 | 3-5 | 0.2 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
C83600 (Standard: ASTM) | 84 - 86 | 4.3 - 6 | 4 - 5.7 | 4.3 - 6 | 0.25 | 1 | 0.05 | 0.005 | 0.005 | 0.25 | 0.08 | ||
C84400 (Standard: ASTM) | 79 - 82 | 2.5-3.5 | 6-8 | 7-10 | 0.4 | 0.8 | 0.02 | 0.02 | 0.005 | 0.25 | 0.08 |
Our organization manufacturers and supplies a wide range of Silicon Bronze Casting products. Silicon Bronze Castings are is offered in various shapes, sizes and dimensions to suit different requirements of clients. Silicon Bronze Castings are precisely engineered using high graded raw materials to ensure high tensile strength, corrosion resistance and optimum performance. Silicon Bronze Castings are available in different grades. Our Silicon Bronze castings are widely appreciated for their dimensional stability, anti-corrosive property and longer service life. Highlights
Chemical Composition
Copper Alloys | CU | SN | PB | ZN | FE | NI | AL | MN | SI |
---|---|---|---|---|---|---|---|---|---|
C63400 (Standard: ASTM) | Rem. | 0.2 | 0.05 | 0.5 | 0.15 | 0.15 | 2.6-3.2 | 0.25-0.45 | |
C63600 (Standard: ASTM) | Rem. | 0.2 | 0.05 | 0.5 | 0.15 | 0.15 | 3-4 | 0.7-1.3 | |
C63800 (Standard: ASTM) | Rem. | 0.05 | 0.8 | 0.2 | 0.2 | 2.5-3.1 | 0.1 | 1.5-2.1 | |
C64200 (Standard: ASTM) | Rem. | 0.2 | 0.05 | 0.5 | 0.3 | 0.25 | 6.3-7.6 | 0.1 | 1.5-2.2 |
C64210 (Standard: ASTM) | Rem. | 0.2 | 0.05 | 0.5 | 0.3 | 0.25 | 6.3-7 | 0.1 | 1.5-2 |
C87300 (Standard: ASTM) | 94 Min | 0.2 | 0.25 | 0.2 | 0.8-1.5 | 3.5-4.5 | |||
C95600 (Standard: ASTM) | 88 Min | 0.25 | 6-8 | 1.8-3.2 |
We are a prominent Leaded Tin Bronze Castings Manufacturer and Supplier. Leaded Tin Bronze Castings are made from premium grade material, following international industrial standards. Leaded Tin Bronze Castings are easy to install and widely appreciated for their durability and efficiency. Leaded Tin Bronze Castings consist of 10-12% tin as a major alloying element. Clients can avail the offered range in customization with the details specified by them. Highlights
Chemical Composition
Copper Alloys | CU | SN | PB | ZN | FE | NI | P | AL | SI | SB | Impurities |
---|---|---|---|---|---|---|---|---|---|---|---|
LB-1 (Standard: BS 1400) | Rem. | 8-10 | 13-17 | 1 | 2 | 0.1 | 0.02 | 0.3 | |||
LB-2 (Standard: BS 1400) | Rem. | 9-11 | 8.5-11 | 1 | 0.15 | 2 | 0.1 | 0.01 | 0.02 | 0.5 | 0.5 |
LB-4 (Standard: BS 1400) | Rem. | 4-6 | 8-10 | 2 | 2 | 0.1 | 0.02 | 0.5 | 0.5 | ||
LB-5 (Standard: JIS) | Rem. | 4-6 | 18-23 | 1 | 2 | 0.1 | 0.01 | 0.5 | 0.3 | ||
LTB-3 (Standard: IS 318-1981) | Rem. | 6-8 | 9-11 | 0.75 | 0.35 | 2 | 0.01 | 0.02 | 0.5 | 0.8 | |
LTB-4 (Standard: IS 318-1981) | Rem. | 6-8 | 14-16 | 0.75 | 0.35 | 2 | 0.02 | 0.5 | 0.8 | ||
LTB-5 (Standard: IS 318-1981) | Rem. | 9-11 | 8.5-11 | 1 | 0.35 | 2 | 0.01 | 0.02 | 0.5 | 0.8 | |
LTB-6 (Standard: IS 318-1981) | Rem. | 4-6 | 18-23 | 1 | 0.35 | 2 | 0.01 | 0.5 | 0.8 |
Brass Castings are manufactured using the best available casting process and tool support so as to ensure in them precision accuracy and high durability standards. Brass Castings are widely acclaimed for their high tensile strength, resistance to corrosion in air & fresh water and excellent cast ability & maintainability. Brass Castings provided by us are made under the hard and fast compliance of international norms and standards. Customers can avail Brass Castings at the competitive market-leading prices. Highlights
Chemical Composition
Copper Alloys | CU | SN | PB | ZN | FE | NI | AL | MN | SI | Impurities |
---|---|---|---|---|---|---|---|---|---|---|
LCB-1 (Standard:IS:292-1983) | 70-77 | 1-3 | 2-5 | Rem. | 0.5 | 0.01 | ||||
LCB-2 (Standard: BS 1400) | 63-67 | 1.5 | 1-3 | Rem. | 0.5 | 0.01 | ||||
DCB 1 (Standard: BS 1400) | 59-63 | 0.25 | Rem. | 0.5 | 0.75 | |||||
DCB 3 (Standard: BS 1400) | 58-63 | 1 | 0.5-2.5 | Rem. | 0.8 | 1 | 0.2-0.8 | 0.5 | 0.05 | 2 |
PCB 1 (Standard: BS 1400) | 57-60 | 0.5 | 0.5-2.5 | Rem. | 0.3 | 0.5 | 0.5 | |||
SCB 1 (Standard: BS 1400) | 70-80 | 1-3 | 2-5 | Rem. | 0.75 | 1 | 0.01 | 1 | ||
SCB 3 (Standard: BS 1400) | 63-70 | 1.5 | 1-3 | Rem. | 0.75 | 1 | 0.1 | 1 | ||
SCB 4 (Standard: JIS) | 60-63 | 1-1.5 | 0.5 | Rem. | 0.01 | 0.75 |