Nayak Plastic Acrylic Emulsion is the Choice Paint for the Beautiful Interior of a Dream Home. It Dries Rapidly and is Easily Washable Too, Giving Your House a New Look Year After Year. in Addition, It is Economical Too, At the Cost of Distemper, Which Gives Smooth and Excellent Matt Finish. It is Based On Timely Tested Acrylic Co-polymer, Along with other Additives, Which Gives Best Finishes and Range. direction for Use surface Preparation: Newly Plastered Surface Must Be Allowed to Mature for At Least 3 Months. Previously Painted Surface Should Be Scraped Off Before Application. the Surface Should Be Free from Chalking and Cracks Should Be Filled with Sonacare Polymer Based Dry Wall Putty. Sand the Surface with Emery Paper No. 320 and Wipe Clean. if the Surface is Effected with Algae and Fungi, Then It Should Be Treated with Antifungal Solution Available in the Market. application: Apply Two Coats of Weather Plus By Thinning 1 Liter Paint with 750 Ml of Water in a Gap of 4-6 Hours Between Each Coat. for Newly Plastered Surface Mix 1 Ltr of Weather Plus with One Ltr of Water and Apply as Self Priming Coat. for Horizontal Surfaces like Window Edges, Three Finish Coats of Weather Plus Should Be Applied for Better Results. precautions do Not Apply At Temperature Less Than 10 , Stir Well and Strain the Mixture Before Use, Do Not Over Thin the Paint.

Nayak Plastic Acrylic Emulsion is the Choice Paint for the Beautiful Interior of a Dream Home. It Dries Rapidly and is Easily Washable Too, Giving Your House a New Look Year After Year. in Addition, It is Economical Too, At the Cost of Distemper, Which Gives Smooth and Excellent Matt Finish. It is Based On Timely Tested Acrylic Co-polymer, Along with other Additives, Which Gives Best Finishes and Range. direction for Use surface Preparation: Newly Plastered Surface Must Be Allowed to Mature for At Least 3 Months. Previously Painted Surface Should Be Scraped Off Before Application. the Surface Should Be Free from Chalking and Cracks Should Be Filled with Sonacare Polymer Based Dry Wall Putty. Sand the Surface with Emery Paper No. 320 and Wipe Clean. if the Surface is Effected with Algae and Fungi, Then It Should Be Treated with Antifungal Solution Available in the Market. application: Apply Two Coats of Weather Plus By Thinning 1 Liter Paint with 750 Ml of Water in a Gap of 4-6 Hours Between Each Coat. for Newly Plastered Surface Mix 1 Ltr of Weather Plus with One Ltr of Water and Apply as Self Priming Coat. for Horizontal Surfaces like Window Edges, Three Finish Coats of Weather Plus Should Be Applied for Better Results. precautions do Not Apply At Temperature Less Than 10 , Stir Well and Strain the Mixture Before Use, Do Not Over Thin the Paint.