Sood Chemicals

Kurukshetra, Haryana

Product Name : Aluminum Borohydride Micro powder

Aluminum Borohydride is produced by the reaction between sodium borohydride with aluminium chloride. The explosive liquid ignites suddenly in air and reacts dynamically with water to form hydrogen, used mainly in organic synthesis. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. Aluminum Borohydride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No: 16962-07-5

Appearance colorless liquid

APS 1-5m (Can be Customized)

Purity 99%

Chemical formula H18AlB3

Molar mass 71.51 g mol-1

Density N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Beryllium Borohydride Micro powder

Beryllium Borohydride is generally immediately available in most volumes. Beryllium Borohydride has an extremely high total hydrogen storage capacity. Originally, Be(BH4)2 was prepared by reaction of BeMe2 with diborane and, more expediently, by mechanochemical exchange response of BeCl2 with alkali metal borohydrides followed by vacuum distillation at 140 C.Beryllium Borohydride is very unstable, exploding on contact with air and moisture. Unfortunately, the intense toxicity of beryllium, and very high reactivity of Be(BH4)2, makes this material inappropriate for hydrogen storage despite low decomposition temperature and high frequency. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered. Hydride compounds are used often used as portable sources of hydrogen gas.

Cas No: 17440-85-6

Appearance White

APS 1-5m (Can be Customized)

Purity 99%

Chemical formula B2BeH8

Molar mass 38.696

Density 0.604 g/cm3

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Product Name : Lanthanum Nickel Hydride Micropowder

Lanthanum Nickel Hydride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. soodchemicals produces to many standard grades when applicable, Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No: N/A

Appearance Powder

APS 1-5 Micron (Can be Customized)

Purity 99%

Chemical formula LaNi5H7

Molar mass 439.43

Density N/A

Melting Point : N/A

Boiling Point : N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Lithium Aluminum Hydride Micropowder

Lithium Aluminum Hydride is generally immediately available in most volumes. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered. Hydride compounds are used often used as portable sources of hydrogen gas. Typical and custom packaging is available.

Cas No: 16853-85-3

Appearance Powder

APS 1-5 Micron (Can be Customized)

Purity 99%

Chemical formula LiAlH4

Molar mass 37.95

Density 0.917 g/cm3

Melting Point : 150 C

Boiling Point : N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Polyvinylidene Fluoride Micro Powder

Pack Size : 50 Grams , 100 Grams , 500 Gram, 1000 Gram ,

Product Description

Polyvinylidene fluoride (PVDF), also known as polyvinylidene difluoride and PVF2, is part of the fluoropolymers family; a group of specialised, versatile polymeric materials with distinct properties that result from the strong bond between their carbon atoms and fluorine atoms and the fluorine shielding of the carbon backbone. PVDF is a specialty polymer with pyroelectric and piezoelectric properties and is used in the manufacturing of diverse high-purity, high-strength, and high-chemical-resistance products for applications in electrical, electronic, biomedical, construction, fluid-systems, oil-and-gas.electrical and electronic industrial wire, cable coating, sleeve, Heat Shrinkable tube, bobbin, wiring board, printed circuit board, wire harness device, anode shield, high dielectric constant capacitor film and electric heating band, optical fiber sheath or outer coating, etc. Because the dielectric loss of polyvinylidene fluoride is larger, especially suitable for low voltage electrical insulation. Good processing strength, flexibility, easy processing, good transparency, easy coloring, so it is an excellent insulation material for low voltage electrical products. After unidirectional stretching and polarization treatment of polyvinylidene fluoride, It can change the vibration energy into electrical energy, and can also change the electrical energy into vibration energy. In addition, good processing, can be processed into a variety of free shapes, its application scope is expanding, has been applied to the piezoelectric film audio components, such as 1020kHz speakers, microphones, headphones, telephones, etc; such as> 20kHz, up to 900MHz probe, microphone, ultrasonic microscope and ultrasonic air, etc.; Measurement of vibration meter, pressure gauge, accelerometer, etc.; Medical sphygmomanometer and palpation device; thermoelectric film has been used in radiation thermometer, infrared sensor, millimeter wave detector, radiation energy detector, laser energy detector; Fire detector and anti-theft detector.

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Lanthanum Nickel Cobalt Alloy Micropowder

Lanthanum Nickel Cobalt Alloy is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Soodchemicals offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies.

Cas No: 130469-99-7

Appearance Gray Powder

APS 1-5m (Can be Customized)

Purity 99%

Chemical formula La2Co1Ni9

Molar mass 432.46

Density 7.95 g/cm3

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Aluminum Carbide Max Phase Powder

Pack Size : 50 Gram, 100 Gram , 250 Gram, 500 Gram ,

Aluminum Carbide is generally immediately available in most volumes. Carbides are compounds in which the anion is one or more carbon atoms. Most metals form carbide compounds, though not all: Indium and Gallium, for example, do not. Like diamond, a pure carbon substance, carbide compounds tend to be extremely hard, refractory and resistant to wear, corrosion and heat, making them excellent candidates for coatings for drills and other tools. They often have other valuable properties in combination with toughness, such as electrical conductivity, low thermal expansion and abrasiveness.

Cas No: 1299-86-1

Appearance Black/ Gray Powder

APS 1-5m (Can be Customized)

Purity 99.9%

Chemical formula Al4C3

Molar mass 143.96

Melting Point: 2200 C

Boiling Point: N/A

Density: 2.36 g/cm3

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Note : We supply different size ranges of Lab, R&D Materials as per requirements and send e-mail soodchemicals@gmail.com, soodsalespurchase@gmail.com for any inqury & technical qus, Official quotation.

Product Name : Lanthanum Nickel Alloy Micropowder

Lanthanum Nickel is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. soodchemicals offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies.

Cas No: 12196-72-4

Appearance Gray Powder

APS 1-5m (Can be Customized)

Purity 99%

Chemical formula LaNi5

Molar mass 432.37

Density 7.950 g/cm3

Solubility in H2O: Insoluble

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Inconel 690 Alloy Micropowder

Pack Size : 10 Grams , 50 Grams , 100 Gram, 500 Gram ,

Product Description

Inconel 690 is a high-chromium nickel-base alloy with superior aqueous corrosion and stress-cracking resistance. IN-738 is used in nuclear reactors, metal dusting applications, and other high-temperature industrial environments. We offer standard sizes and shapes in addition to manufacturing unique custom alloys which are tailored to customer requirements. Bulk quantities and term contracts are available for all of our alloy materials. Please contact us with your specifications to receive a quote for materials.

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Note : We supply different size ranges of Lab, R&D Materials as per requirements and send e-mail soodchemicals@gmail.com, soodsalespurchase@gmail.com Mobile No +91-8053538675, Same for what's up +91 9992538675 Same for whats up for any inqury & technical qus, Official quotation.

Product Name : Iridium Nanoparticles Nanopowder

Iridium (Ir) Nanoparticles, nanodots or nanopowder are black spherical high surface area metal particles. Nanoscale Iridium Particles are typically 20 - 100 nanometers (nm) with specific surface area (SSA) in the 1 - 5 m2/g range. Nano Iridium Particles are also available in Ultra high purity and high purity and coated and dispersed forms. Nanofluids are generally defined as suspended nanoparticles in solution either using surfactant or surface charge technology. Nanofluid dispersion and coating selection technical guidance is also available. Other nanostructures include nanorods, nanowhiskers, nanohorns, nanopyramids and other nanocomposites. Surface functionalized nanoparticles allow for the particles to be preferentially adsorbed at the surface interface using chemically bound polymers.

Cas No: 7439-88-5

Appearance Black Powder

APS 60-70 nm (Can be Customized)

Purity 99%

Chemical formula Ir

Molar mass 192.22

Density 22.56 g/cm3

Melting Point: 4428C

Boiling Point: 4130 C

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Lithium Hydride Micropowder

Lithium Hydride is generally immediately available in most volumes. Hydride compounds are used often used as portable sources of hydrogen gas. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered. Hydride compounds are used often used as portable sources of hydrogen gas.

Cas No: 7580-67-8

Appearance Powder

APS 1-5 Micron (Can be Customized)

Purity 99%

Chemical formula LiH

Molar mass 37.95

Density 0.82 g/cm3

Melting Point : N/A

Boiling Point : N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Product Name : Artificial Saliva

Pack Size : 50ml , 100 ml, 500 ml , 1000 ml

Product Description

An artificial saliva (AS) of defined composition is necessary for testing the performance of materials that serve in the mouth as natural saliva is too variable. The chemistry involved is critically important. Many AS recipes can be found in the literature, but the stability of tooth material, i.e. hydroxyapatite (HAP), in most of these has not been addressed. In fact, few contain all major ionic components with concentrations in the physiological range.

Related Information :

Precautions for safe handling

Ensure good ventilation/exhaustion at the workplace.

Avoid contact with skin, eyes and clothing

Avoid breathing fumes.

Use personal protection equipment as outlined in section 8.

Information about protection against explosions and fires: No special measures required.

Conditions for safe storage, including any incompatibilities

Storage:

Requirements to be met by storerooms and receptacles: Store under refrigeration

Information about storage in one common storage facility: Not required.

Further information about storage conditions: Keep receptacle tightly sealed.

Specific end use(s) No further relevant information available.

Product Name : Calcium Hydride Micropowder

Calcium Hydride is generally immediately available in most volumes. It offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is produced from various sources such as fossil fuels, water and renewables. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies. Currently, hydrogen can be stored in these three forms: Compressed Hydrogen, Liquid Hydrogen and Chemical Storage. High purity, submicron and nanopowder forms may be considered. Hydride compounds are used often used as portable sources of hydrogen gas. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cas No: 7789-78-8

Appearance White Powder

APS 1-5 Micron (Can be Customized)

Purity 99%

Chemical formula CaH2

Molar mass 42.09

Density N/A

Melting Point : N/A

Boiling Point : N/A

Solubility in H2O: N/A

Usage/Application : Scientific Research

Related Information :

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Suggest Equipment

Eyeshields, Gloves, type N95 (US), type P1 (EN143) Respirator Filter

Silver is a chemical element with the symbol Ag, and atomic number 47. A soft, white, lustrous transition metal, it exhibits thea highest electrical conductivity, thermal conductivity.Most silver is produced as a byproduct of copper, gold, lead, and zinc refining. Silver has long been valued as a precious metal. Silver metal is used in many bullion coins, sometimes alongside gold.while it is more abundant than gold, it is much less abundant as a native metal.As one of the seven metals of antiquity, silver has had an enduring role in most human cultures.

Graphene conducts heat and electricity very efficiently along its plane. The material strongly absorbs light of all visible wavelengths, which accounts for the black color of graphite; yet a single graphene sheet is nearly transparent because of its extreme thinness. The material is also about 100 times stronger than would be the strongest steel of the same thickness.

Graphite, archaically referred to as plumbago, is a crystalline form of the element carbon with its atoms arranged in a hexagonal structure. It occurs naturally in this form and is the most stable form of carbon under standard conditions. Under high pressures and temperatures it converts to diamond.

Predominantly single phase (92–94 vol.%), fully dense samples of Hf2SnC, Zr2SnC, Nb2SnC, Ti2SnC, Hf2PbC and Zr2PbC were fabricated by reactively HIPing the stoichiometric mixture of the corresponding elemental powders in the 1200–1325°C temperature range for 4–48 h. The latter two, fabricated here for the first time, required a further anneal of 48–96 h to increase the volume fraction of ternary phases. Hf2PbC and Zr2PbC are unstable in ambient atmospheres at room temperature. As a family these compounds are good electrical conductors; the lowest and highest values of the electrical conductivities were, respectively, 2.2×106 (Ω.m)−1 for Hf2SnC and 13.4×106 (Ω.m)−1 for Hf2PbC. The Vickers hardness values range from 3 to 4 GPa. All compounds are readily machinable. The Young's moduli of Zr2SnC, Nb2SnC and Hf2SnC are, respectively, 178, 216 and 237 GPa. The thermal coefficients of expansion, TCE's, of the ternaries scale with those of the corresponding binaries, and are relatively low for such readily machinable solids. The lowest TCE belonged to Nb2SnC [(7.8±0.2)×10−6 K−1], and the highest to Ti2SnC [(10±0.2)×10−6 K−1]. The TCE's of Hf and Zr containing ternaries cluster around (8.2±0.2)×10−6 K−1. All the synthesized ternary carbides were found to dissociate into the transition metal carbide.

Related Product :

• Hf2SC MAX Phase Powder
• Hf2SnC MAX Phase Powder
• Hf2SnN MAX Phase Powder
• Hf2TIC MAX Phase Powder
• Mn2AIC MAXene Powder

We report on first principles prediction and subsequent synthesis of Mn2GaC, a new member of the inherently nanolaminated Mn+1AXn (MAX) phase family. This phase, the first to include Mn as the sole M element, was synthesized as a heteroepitaxial thin film. The material was theoretically predicted to display magnetic ordering with ferromagnetic (FM) and antiferromagnetic configurations degenerate in energy within the computational accuracy. Vibrating sample magnetometer measurements show FM ordering with a saturation moment of ms=0.29 μB per Mn atom and remanent moment of mr=0.15 μB per Mn atom for temperatures≤230 K.

Related Product

• Mn3AlC2 MAXene Powder
• Mo2C MXene Powder
• Mo2Ga2C MAXene Powder
• Mo2GaC MAX Phase Powder
• Mo2Ti2AIC3 MAXene Powder

Related Product:

• ScAl3C3 MAXene Powder
• Spherical Ti3AlC2 MAXene Powder,  
• Ta2AIC MAXPhase Powder

Related Product:

• Ta2C MXene Powder
• Ta2GaC MAX Phase Powder
• Ta4AIC3 MAXene Powder
• Ta4C3 MXene Powder

Related Product:

• Ti21nN MAX Phase Powder
• Ti2AIC MAX Phase Powder
• Ti2AIN MAX Phase Powder
• Ti2AIC  MAXene Powder

Silver is a chemical element with the symbol Ag, and atomic number 47. A soft, white, lustrous transition metal, it exhibits the highest electrical conductivity, thermal conductivity.Most silver is produced as a byproduct of copper, gold, lead, and zinc refining. Silver has long been valued as a precious metal. Silver metal is used in many bullion coins, sometimes alongside gold.while it is more abundant than gold, it is much less abundant as a native metal.As one of the seven metals of antiquity, silver has had an enduring role in most human cultures.

Product Name : Sodium Aluminium Hydride Micro Powder

Pack Size: 10 gram, 50gram, 100gam , 250gram, 500 gram

Description :

Sodium aluminium hydride or sodium alanate is an inorganic compound with the chemical formula NaAlH4. It is a white pyrophoric solid that dissolves in tetrahydrofuran (THF), but not in hydrocarbons. It has been evaluated as an agent for the reversible storage of hydrogen and it is used as a reagent for the chemical synthesis of organic compounds. Similar to lithium aluminium hydride, it is a salt consisting of separated sodium cations and tetrahedral AlH. Sodium tetrahydroaluminate can release up to 7.4 wt % of hydrogen when heated at 200 C (392 F). Absorption can be slow, with several minutes being required to fill a tank. Both release and uptake are catalysed by titanium. Sodium aluminium hydride is highly flammable. It does not react in dry air at room temperature but is very sensitive to moisture. It ignites or explodes on contact with water. Sodium Aluminum Hydride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. We offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. Hydrogen can easily be generated from renewable energy sources and is the most abundant element in the universe. Hydrogen is nonpolluting and forms water as a harmless byproduct during use. The challenges associated with the use of hydrogen as a form of energy include developing safe, compact, reliable, and cost-effective hydrogen storage and delivery technologies.

Related Information :-

Storage Conditions:

Airtight Sealed, Avoid light and keep dry at room temperature.

Utilized as probes of fundamental magnetic interactions; Media for magnetic data storage Ferro fluids for rotary vacuum seals; Biomedical applications such as magnetic separation and contrast agents for magnetic resonance imaging. In the environmental field in the degradation of chlorinated hydrocarbons and hard metals in contaminated soils; Single electron transistor. Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the iron nanoparticles should be avoided under stress. 

Related Products :

• Iron Fe Powder, 99% (1, , 4, , 5, 8, 10, 45, 75, 150, 200, 300um)
• Iron Powder / Fe Powder (Fe, 99.9%, 800nm)
• Fe Spherical Powder / Iron Spherical Powder (Fe, 800nm, Spherical, 99.9%)
• Fe Spherical Powder / Iron Spherical Powder (Fe, 3um, Spherical, 99.9%)
• Iron Fe Nanopowder / Nanoparticle (Fe, 99.5+%, 95-105nm, metal basis)
• Iron Fe Nanopowder / Nanoparticle (Fe, 99.5+%, 65-75nm, metal basis)
• Iron Fe Nanopowder / Nanoparticle (Fe, 99.5+%, 35-45nm, metal basis)
• Iron Fe Nanopowder / Nanoparticle (Fe, 99.5%, 25 nm, partially passivated, Metal basis)
• Iron Fe Nanopowder / Nanoparticle (Fe, 99.5%, 25 nm, carbon coated, Metal basis)
• Fe-Ni-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni:Co/55:28:17
• Fe-Ni Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni/5:5
• Fe-Ni Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, Fe:Ni/2:8
• Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11
• Fe Nanopowder / Fe Nanoparticles 25nm 5wt% Ethanol Dispersion
• Iron Nanopowder / Iron Nanoparticles 25nm 5wt% NMP Dispersion
• Iron Nanoparticles / Iron Nanopowder 25nm 5wt% Isopropanol Dispersion
• Iron Nanoparticles / Iron Nanopowder 25nm 5wt% Acetone Dispersion
• Fe Nanoparticles / Fe Nanopowder 25nm 5wt% Ethylene Glycol Dispersion
• Fe Nanoparticles / Fe Nanopowder 25nm 5wt% Propylene Glycol Dispersion
• Fe Nanoparticles / Fe Nanopowder 25nm 5wt% Toluene Dispersion