Post Buy Requirement
SE
Thane, Maharashtra, India
Add Review

Other Products / Services

HIGH PRESSURE PUP JOINTS

Sparklet manufactures high pressure i.e. 5000 psi to 15000 psi CWP Integral And Welded , Elbows and Pipes for flowline. The end connection is Fig. 602 to Fig. 1502 with pipe sizes 2 , 3 are in regular scope and 4 size can be made available as per requirement. Each pipe and elbow qualifies hydrostatic test at rated pressure. Each welded joint passes through a radiography test. The hammer Unions are precisely machined and the threads are inspected with relevant gauges.

View Complete Details

High Pressure Fittings

  • Sizes 2". 3" & 4"
  • End Connection Available Width Hammer Union end Connections
  • Pressure Rating Pressure Tested Upto 1500 psi
  • Types Tees Elbows - 45° - 90°, Cross Long Bends
View Complete Details

Choke Manifolds

  • Size 2-1/16”, 3-1/8”, 3-1/16”
  • Working Pressure 5000 & 10000 psi

Sparklet Designs and manufactures Choke Manifold Equipment.


Flanges as per API 6A with Hammer Union ends Orientation of Gate Valves and Chokes as per requirement.

View Complete Details

ERUPTION MANIFOLDS

Sparklet Designs and manufactures Choke Manifold Equipment.


Specifications:



  • Working Pressure : 5000 & 10000 psi

  • Sizes - : 2-1/16, 3-1/8, 3-1/16


Flanges as per API 6A with Hammer Union ends Orientation of Gate Valves and Chokes as per requirement.

View Complete Details

Oil & Gas Burner Booms

Specification for Off Shore Burner and Onshore



  • Atomizer Capacity : Upto 15000 BOPD

  • Service : Sour

  • Number of Heads : Upto 4

  • Gas Flow Rates : Upto 3 MM SCF / Day

  • Water Required : 10, 000 - 15000 BBL / day

  • Pilot Firing : Diesel or LPG


Offshore Burner Booms


TPI approved Design Calculations for up to 90 for OFFSHORE Burner Booms and King Post Load Tested


2 or 3 Sections to make up 60 to 90 respectively Construction Tubular Project Specific requirements can be designed and fabricated

View Complete Details

Indirect Water Bath Heater

Sparklet make water bath heater is capable of heating up to 10, 000 BPD of Hydrocarbon oil with gas up to 60 MM SCFD from 0 C to 70 C for DE Waxing and further processing of Crude. The maximum heat transfer provided up to 13 MM BTU / HR.


The Water Bath Heater has Process Fluid coils, carrying the hydrocarbon oil with gas in & out of the Water Bath with choke & manifold for flow control & bypass of oil. The coiled tubes have a capacity to with stand a pressure off 10000 psi. Equipment Design as per API 12 K


Burner System : The Bath Heater uses Diesel Oil as fuel with Natural Gas / LPG for ignition. Burner used are of International standard makes. The burner system has in line Spark Arrestor and Stack at the end of the Fire Tube Outlet.


Manifold : The unit is installed with API 6A up to 10 K Gate Valves and Chokes. By pass manifold provided for efficient flow control.


Instrumentation : The Bath Heater comes complete with all Instrumentations and valves, pressure and temperature Gauges, pressure switches, Level indicators, etc.



  • Sparklet Offers Packages With

  • Process Design

  • Mechanical Designs

  • Complete Drawing Package with use of Cad, Solid Works

View Complete Details

OIL DIVERTER MANIFOLDS

Diverter Manifolds are used to re-direct the well fluids & gasses produced during well testing operations. The Diverter Manifolds are constructed out of Ball Valves selected as per Pressure Ratings. These Manifolds can be used with Sparklet Piping Package


SPECIFICATIONS:


Meets Requirements of NACE MR 0175 Working Pressure Ratings 1440 psi & 2160 psi Sizes 2, 3, 4.

View Complete Details

GAS DIVERTER MANIFOLDS

Diverter Manifolds are used to re-direct the well fluids & gasses produced during well testing operations. The Diverter Manifolds are constructed out of Ball Valves selected as per Pressure Ratings. These Manifolds can be used with Sparklet Piping Package


SPECIFICATIONS:


Meets Requirements of NACE MR 0175 Working Pressure Ratings 1440 psi & 2160 psi Sizes 2, 3, 4.

View Complete Details

STEAM EXCHANGERS

Sparklet Make Heat Exchanger, which is used to heat the well production, consists of a pressurized shell containing a set of process coils. Steam is piped from an external steam generator into the shell to heat the well effluent flowing the process coils.


Range of portable skid mounted 5000 PSIG, 10000 PSIG (conventional 3ID or high flow rate 4ID) and 15000PSIG heat exchanger for rental are primarily used in conjunction with surface well testing applications world-wide to complete the package of heat transfer during well test operations. All our units are DNV 2.7-1approved.


Features



  • Improves separation of oil/water emulsions and foaming oils by reducing surface tension through heat transfer

  • Prevents formation of hydrates

  • Reduces viscosity of oil to improve burner efficiency

  • Equipped with toolbox and spares

  • Fully automatic temperature

View Complete Details

CYCLONE DESANDER

  • Temperature 250 deg f
  • Working pressure 5000 psi
  • Maximum pressure upto 15000 psi
  • Gas Flow rate 14 mmscfd
  • Liquid Flow rate 8000 bbl/d
  • Efficiency 98% of solid dia up to 80 micron
View Complete Details

Sand Catcher

  • Temperature 250 deg f
  • Working pressure 5000 psi
  • Maximum pressure upto 15000 psi
  • Gas Flow rate 14 mmscfd
  • Liquid Flow rate 8000 bbl/d
  • Efficiency 98% of solid dia up to 80 micron
View Complete Details

Multi Phase Flow Meter

Sparklet Skid Mounted MultiPhase Flow Meter + Flow Computer are been used for Testing of New or Existing Wells to know the performance i.e. GOR, Oil Flowrate, Water Flowrate, Density, Composition of Gas and other few parameters to know the behavior. Purpose and Application. According to the Oil Reservoir Conditions and Client Requirement the above equipment can be provided in order to meet the well testing service in the Oil And Gas Fields.

View Complete Details

Batch Mixers

Sparklet make Batch Mixers are self contained, cement mixing unit, designed to perform critical mixing operations where slurry accuracy & consistency are of the utmost importance. This versatile unit mixes (single 50 BBL) slurry batches. It includes 50 BBL batch-mixing tanks with hydraulically powered bi-directional


The unit allows one operation to perform and monitor all mixing functions from the control deck located on the skid, the skid is provided with an overhead-lifting frame designed for handling the entire unit.


Capacity :-



  • 100 BBL Twin Tank 50 BBL Capacity

  • 100 BBL Single Tank

  • 50 BBL Single Tank

  • 30 BBL Single Tank


Options :-



  • 100 BBL Trailer-mounted unit

  • 100 BBL Batch Mixer, Diesel powered skid unit

  • 50 BBL Truck Mounted Batch Mixer

  • 50 BBL Batch Mixer, Diesel powered skid unit

  • 50 BBL Batch Mixer, Electrical powered skid unit

  • 30 BBL vertical mixing tank, skid mounted unit

View Complete Details

Air Cooler

Air coolers are widely used in Oil & Gas, Steam House System, Hot Oil System and other major Systems and Industries. The main purpose of Air Coolers which uses Air as a cooling medium to reduce the temperature to desired limit. These are the most economical Items in Cooling area and reduce the Utility Cost. These Air Coolers are designed for high Pressure Temperature applications as desired. The Selection of the Tubes are as per the Process requirement to suit the Process Condition.

View Complete Details

ESD MANIFOLDS

  • Design Pressure 1360 Psi
  • Working Temperature 200 Deg F
  • Line Size 6”
View Complete Details

Inlet Manifolds

  • Design Pressure 1315 Psi
  • Working Temperature 300 Deg F
  • Main Header Piping 12”
  • Test Header Piping 6”
View Complete Details

Heat Exchanger

Connections : Standardized sizes for easy assembly. Additional thread and surface protection for clean installation.


Tubesheet : Stainless steel straight or U-tubes in a carbon steel shell. Available in a variety of diameters and lengths, Shell and tube heat exchanger transfer large amounts of heat at a relatively lower cost.


Gaskets : High quality compressed fibres (reusable).


Head: Standard cast-iron or steel head for heavy duty services (also available as a spare part).


Mounting : Saddles attached with standard units for quick & easy mounting.


Baffles : Punched baffles with minimum clearances between tubes assures correct fluid flow and minimized bypass.


Shell : Welded shell protected with high quality paint for corrosion resistance.


Tube Bundle : Stainless steel tubes allow for strong, durable performance over a wide range of applications. Unique tube bundle layout minimizes buildup problems at the edges and optimizes media flow in the unit.

View Complete Details

MUD HOPPER

The Hopper is used with high volume Centrifugal Pumps, normally on offshore rigs and large rigs. A butterfly valve is incorporated in the neck of the hopper to adjust flow and to close off the hopper after use.


The hopper comes complete with nozzle, venturi, funnel, sack table, butterfly valve all mounted on a base. This standard 2 nozzle handles 8 sacks/minute of barite and 4 sacks/minute gel. 3 male NPT inlet by 6 weld end outlet.

View Complete Details

Stand Pipe Manifolds

SMud Standpipe Manifolds designed to suit all types of drilling installations like semis, drillships, fixed platforms, jackups and more. They are built to industry rules and regulations and customized to the clients specification. The Manifold can be fitted on a complete skid with support framework. Valves, instruments, wiring, and tubing are designed to suit the clients available space and other interface requirements.

View Complete Details

Knock Out Drums

  • Size 29” x 8.2’
  • Liquid 3000 bpd.
  • Gas 3 mmscfd.
  • Design Pressure 100PSI.
View Complete Details

Steam Generators

Sparklet can offer and arrange of Steam Generator 1.4 Million Btu through to 6 Million Btu`s. can be supplied with compressors or heat exchanger for well testing operations. Installed in purpose built containers to DNV 2.7-1, these fully enclosed units are delivered with internal water tanks, a water softening plant and either internal or external fuel tanks in order to meet all sites or rig requirement's.


Feature & Benefits



  • Steam vents and safety valve vents mounted away form passing personnel.

  • Internal intrinsically safe lightning enables safe operation and maintenance in all conditions.

  • High and low water levels, high pressure steam and flame failure shutdowns are fitted as standard as safety and protection measures.

  • Equipped with toolbox and spares.

  • Gas detection propane, methane and H2S.


Options



  • Steam Hoses

  • Hard steam pipes

  • CO2 fire Suppression

View Complete Details

TWIN POD FILTRATION UNIT


  • Application : Completion Fluid

  • Cartridge Type : TH10-40-2 Of 10 Micron

  • Absolute Flow Vessel : 6.3 BB/ Min Per Filter

  • Design Data VIII, DIV-1 : As per ASME Sec

  • Test Pressure : 225 PSI

View Complete Details

PERFORMANCE HEATER


  • High level of instrument to monitor & control temperature from both shell & tube side.

  • Special Expansion bellows arrangement.

  • Size : 32 x 394Fuel gas flow rate : 5332 Kg/Hr.

  • Heat Duty : 22.21 MMBtu/Hr.

View Complete Details

SLURRY TUBS

Agitator provided for mixing purpose. Electrical motor assembly provided on top. Less space required. Transfer hose provided for transfer of slurry.

View Complete Details

Mud Agitator

Mud Agitator is used for maintaining a drilling / work over fluid of uniform consistency throughout the surface mud system. Featuring a "C" face, Sparklet Agitators are coupled to a rugged oilfield gearbox, which eliminates misalignment and troublesome couplings


Models:



  • Available in Horizontal & Vertical

  • Range: 5HP to 30 HP

View Complete Details

JET SHEARING UNIT


  • Unit consists of an eductor coupled to the yoke of a model 1002 JS

  • The educator has removable and replaceable nozzle amuser inserts and a 0-30 Hg vacuum gauge.

  • The Jet Shear consists of a 10" mixing chamber with two removable nozzle plates, tow nozzle plate covers, Victaulic clamps.

  • Unit is skid mounted with a stainless steel chemical hopper with main pump line bypass and table

  • All carbon steel surfaces are sandblasted and epoxy coated with an urethane upper coat

  • Intel : 4" NPT threaded nipple with 0-100 psi pressure gauge

  • Outlet : 6" Victaulic groove nipple.

View Complete Details

PUMPS SKIDS

SPARKLET ENGINEERS PVT LTD is a p manufacturer of pump skid systems across multiple industry sectors. Pump skid systems come complete with PLC automation and touch-screen controls, and are ready to move fluid or product when arriving on site. Our engineers work closely with your team to design a custom pump skid system using the latest 3D modeling software. Accuracy and safety are at the forefront of our engineering, and our team will ensure your pump skids meet or exceed any technical, OSHA, or government regulations. Packaged pump skids are a custom solution for your fluid handling needs. Bring us your ideas or specifications and our in-house mechanical and electrical engineers will help you find the best solution for your project. We have years of experience creating custom pump skids that are fully automated with PLC and touch-screen controls.

View Complete Details

Slug Catchers


  • Vessel type slug catcher

  • Sufficiently large vessel to store

  • Largest slug expected from upstream system

  • Key equipment between outlets of pipeline processing equipment.

  • Internal To be used

  • Coalescer pack

  • Inlet deflector

  • Stilling baffle

  • Vane pack

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sparklet (Sparklet Engineers)
  • Address: Plot No. B-54 Anand Nagar, Ambarnath M.I.D.C. Area, Ambarnath - East, Thane, Maharashtra. Pin :- 421506
  • Share us via