Navi Mumbai, Maharashtra, India
Our Products
The Larger Nozzles in the DA Series are widely used in the industry, for a wide variety of applications. They maintain the simple design of the smaller nozzles, With the inherent resistence to clogging due to design of the X-vane and are often manufactured by any type of machinable material like SS304, SS316, PPPVC etc.
Application : Continuous Casting Cooling.
Spray Characteristics : 1] Produces a full cone pattern
2] Sprayed volume is evenly distributed across spray pattern
3] Available with a range of spray angle
Materials and Construction : 1] Standard materials are Brass and Stainless Steel
2] Male and female thread available
3] 3/8" or 1/4" BSP / NPT threaded connections available
4] Specially designed internal core ensures a good
resitance to clogging
NIPPLES, LOCKNUTS & INTERNAL FILTERS :
We offer a range of nipples and locknuts in different types and materials to suit most of our customers requirements. Produced in high quality materials and under strict tolerances they ensure a precise and reliable assembly with all nozzles.In your system small size filters ensure individual protection against clogging for individual low capacity nozzles.
PIPE CLAMPS AND SWIVEL JOINTS :
The most extensive range of nozzle clamps engineered for industrial applications to give your system a modern and efficient design with the added value of an easy and well kept at peak performance and long periods of time. Three series of swivels in a wide size range allow the proper connection and quick pointing of the nozzles in your system, improving its overall performances. Swivel joints are available in brass and several stainless steel qualities.
Pressure Reducing & Desuperheating Station.
The difference, between the saturation temperature and the actual temperature of the steam is called 'superheat'.
Orifice Assemblies.
Orifice plate is a thin plate with a hole in the middle or edge depending on design as per application. It is usually placed in a pipe in which fluid flows.
Integral Assemblies.
In integral assembly, the temperature compensation and the pressure compensation is done at 0.3D and 0.6D downstream of the assembly respectively.
Multistage Orifice Assemblies.
These are basically used to detect flow of fluids, sufficiently to collapse the bubbles with extreme violence.
Double compression (Double ferrule) tube fittings provide a leak proof, torque free joints in all instrumentation & process tubing connections which will withstand high pressure, Impulse, Vacuum, Vibration and temperature. These features eliminates costly, hazardous leaks provide highest safety and maintenance free tubing joints.
All action in the fittings move axially, i.e. Tube is not twisted during assembly. Since no torque is transmitted from the fittings to the tubing, there is no initial strain, which might weaken the tubing. Each part in the fitting assembly is machined to most exact dimensional tolerance on CNC machines. Total quality management is practiced throughout the manufacturing process as per ISO standard to achieve best quality joints at all tubing end connections. Tube fitting assembly consist of four precision machined components namely body, nut, front ferrule and back ferrule.All you need to do is to insert the tube and tighten the nut by 1 turn from finger tight position. This action forces both front as well as back ferrule to move forward between nut and body, Back ferrule is driven against the rear taper of the front ferrule and swaged radially inward on the tube, thus holding the tube against vibration and mechanical pull due to pressure. Back ferrule also lift the front ferrule out to form a full faced seal on the taper surface of the body. Front ferrule also moves forward against the taper portion of the fitting body due to wedging action forces inward, gripping and subsequently sealing the front edge tightly on to the tubing.
Spraytech Systems offer our clients an assortment of pipe fittings which are highly tensile and durable. Made from superior quality raw materials, our range of pipe fittings are known for high-strength, less maintenance, excellent finish and longer life.
Features
Used for completely welded outlets where desirable for ease in lining up header branches. Use of brancholets precludes faulty fabrication like roughcut, branch pipe projection, notches present when the reinforcement is not completely integrated with the branch and run.
Nippolet provides a 1-piece forged fitting that eliminates a nipple, coupling and one-weld. It given a study branch connection for forged steel valves.True angular relationship between outlets facilitate rapid, economical piping make up.
Spraytech Systems offer our clients threaded fittings which are made from superior quality raw materials, our range of pipe fittings are known for high-strength, less maintenance, excellent finish and longer life.
SPRAYTECH offers a full range of custom made thermowell, designed to protect the temperature gauges from various corrosive media, pressure, and abrasives. They are designed to permit quick removal and easy fitment of thermometer for replacement, repair testing.
FEATURES:
Shank: Straight, Taper, Stepped. Mounting Style: Threaded, Socket weld, Flanged. Material of Construction: SS family, MS, Brass, Monel etc. Application: widely used for Bi-metal, Mercury, Gas filled thermometers sensors in various industries like paper and pulp, Food and beverage, chemicals, Petrochemicals, fertilizers and Power.
Straight Shank, threaded with or w/o Lag :-
Connection 1/2", 3/4", 1, Bore size: 0.385
Stepped Shank, threaded with or w/o Lag :-
Connection 1/2", 3/4", 1, Bore size: 0.260
Taper Shank, threaded with or w/o Lag :-
Connection 1/2", 3/4", 1, Bore size: 0.260, 0.385
Weld-in Shank :-
Connection 1-1/2", Bore size: 0.260, 0385
Socket weld Shank, with or w/o Lag :-
Connection 1/2", 3/4", 1, Bore size: 0.260, 0.385
Flanged End connection :-
Connection: From 1- 150# Flange onwards
Bore size: 0.260, 0385
Flow Venturi.
Venturi Tubes serve users with accurate measurement of non-viscous fluids in clean & dirty streams. Venturi Tubes are virtually maintenance-free and corrosion-resistant.
As there is marginal difference in nearest metric and fractional size of tubes, visually it is difficult to identify fitting tube sizes. Therefore step is provided on both body and nut for metric tube fittings as shown in following illustration.
Used for making threaded outlets to combine the economy and strength of welding with the flexibility of screwed construction. Shaping and bevelling are unnecessary when threaded brancholets are used for branch connection no longer requires a large inventory of fittings.
