Navi Mumbai, Maharashtra, India
Our Products
Type "C" flat nozzles are designed for high pressure washing applications. Their specially designed inner profile allows for even jet distribution, which results in effective and uniform cleaning action over the surface being processed. All nozzles are finished on high precision machinery assuring close manufacturing tolerances made out of AISI 316 grade stainless steel and all machinable material. Design : One piece construction, Non clogging type. Application : Surface Treatment, Roll Cooling, Degreasing & Rinsing, Lubricating, Industrial washing machines. | ||
The Larger Nozzles in the DA Series are widely used in the industry, for a wide variety of applications. They maintain the simple design of the smaller nozzles, With the inherent resistence to clogging due to design of the X-vane and are often manufactured by any type of machinable material like SS304, SS316, PP/PVC etc.
Flow Rate : 96 LPM to 1200 LPM
Application : Surface spraying, Washing & Cooling of flue gasses to remove fly ash , Cooling condenser, Scrubbing, Foam breaking.
These hollow cone nozzles work on the tangential flow principle and are manufactured by machine tool operation from metal bar stock.This offers versatile construction of small sized nozzles. In addition nozzles can be made on request from any special materials and alloys that are available as a bar stock. There are Following types of hollow cone nozzles.
1) Tangential Entry 2) Inline (Axial) Entry 3) Spiral Hollowcone. Design : Vaneless (Two Piece Construction ) Non clogging
Application : Cooling & Washing of gas
Suited for CIP systems. No motor source is needed due to the reaction force of the cleaning liquid to rotate spray head. Low pressure for cleaning and rinsing application. For rinsing small and medium sized vessels for example dairy, chemical, pharmaceutical and food industries. Material of construction-corrosion resistance TEFLON.
Application : Cleaning of tanks up to 3 m in diameter. Self - rotating. Double bearings.
Compact straight jet with a defined jet length owing to optimum
flow geometry.
Flow conditions are not affected by turbulence. A concentrated jet with
high impact force is achieved. This is used for powerful punctiform
impact, wherever concentrated jet power is vital.
Characteristic : A high efficiency and economical performance is obtained.
Design : One Piece Construction.
Application : For High pressure cleaning systems, Jet Cutting and separating.
Features : Optimized flow maximum jet power concentrated energy.
Oil burner nozzles are available in semi hollow cone spray pattern. Micro-finish of tip & disc seats permitting flow only through the slots of the disc, plus extremely close manufacturing tolerances, ensure accurate capacity control. These nozzles are fitted with filter in order to provide highly efficient in depth filtration with one piece construction extra fine filter microns are supplied as standard on all small capacity nozzles.
Application : LDO firing in kilns of cement, sponge, Iron plants & Dust suppression.
Range :
Spray Angle : 45, 60, 70, 80 & 90.
Flow rate (GPH) at 100 PSI Pressure : 2.50, 3.00, 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00. GPH.
Connection : UNEF 9/16
M.O.C. : SS 303
Spraytech's RMG / HSG Top Spray Nozzles & Lance are design for Large Scale, Medium Scale and Lab Scale Rapid Mixer Granulator and High - Shear Granulator for Wet Granulation. Superior spray quality produces best in class granules from bulk. Manufactured according to GMP and available in wide range of spray rates. And external mixing spray setup enhances the spray quality and distribution in optimum way.
Spray Nozzles and special purpose lance designs available
Fluid bed process consists of following applications :
1. Drying
Process of extracting moisture from solid bulk material by making it fluidized with high flow blow of air, so moisture is removed homogeneously and all over surface of every single particle.
2. Granulation / Agglomeration
Powder particles of bulk material bonded by liquid fine spray. Liquid could be water or an organic solvent and the powder material will be mixed together. Agglomerate has less strength of particle bond.
3. Coating
Fluidized particles are coated with spray of coating material which enhances. coating film must be very uniform over the particle surface.
4. Tangential Coating
Centrifugal motion is used for making spherical pallets, at the same time particles are bonded by binder liquid. layering also can be done in same way.
Air Atomizing Spray Nozzle mixes liquid & air to give fine mist like formation. In common situation we can get super fine liquid spraying drops. Adjustable atomized nozzles can adjust liquid capacity and it can meet the requirement of spraying without changing air pressure and hydraulic pressure therefore it has good adaptability. Each spray device is composed of air cap and liquid cap which can offer two spray modes flat fan and round with wide liquid capacity coverage. There are various available sizes of inlet joint for these type of Spray Nozzles. It is flexible with changeable parts. Atomizing Nozzle has good moisture effect. It is the ideal choice for the location where requires moisture control.
Application : Wool Spraying & Moisturization
Mould Lubricating
Spraying Injection
Air Disinfection
Humidification
Spraytech's RC Series tablet coating spray nozzle are specially designed to meet GMP requirements where surface texture plays very important role.
The unique Air Cap design makes it Anti Bearding and keeps coating process shutdown free, thus higher production ratio and quality requirements are achieved.
RC series spray nozzle is a compact device incorporating of independent controls for Liquid, Atomizing Air and Fan Air for fine tuning of spray capacity, droplet size and spray patterns. It is available in wide variety of spray setups that give a complete selection of flow rate and flat spray patterns.
R series spray nozzles are externally mix nozzles. This means the liquid and air are mixed outside of air cap to produce complete atomized spray.
The liquid atomization is controlled by varying atomizing air and fan air pressures without changing liquid flow rates. The flat spray pattern is controlled by varying the fan air pressure in conjunction with the atomizing air. This is effective for high viscosity liquids, coatings and suspensions.
Tablet coating spray nozzle features a cylinder for controlled "on-off" operation. The cylinder controls a liquid clean-out/ Shut-off needle which also cleans the liquid orifice.
1. Separate atomizing and fan air lines for complete control.
2. Provides variable coverage and fine control of drop size without affecting liquid flow rates.
3. Higher atomizing air pressure yields fine droplet size.
4. Higher fan air pressure yields broader patterns.
5. Non clogging and anti - bearding design.
|
||||||||||||||||||||||||||||
