Spur Corporation. Mumbai, Maharashtra

The Solid material is to use metal, which cannot be punched out of sheets, but are still cheap to produce. These gaskets generally have a much higher level of quality control and can withstand much higher temperatures and pressures. Spur Corporation is a manufacturer of standard size gaskets, non-standard size and custom gaskets from metal for the petroleum and natural gas industry, Nuclear power plants, power generation, food service, commercial transportation industry as well as pharmaceutical industries. We provide industrial metal, metal clad & composition sheet gaskets for compressors, heat exchangers, condensers, valves, pumps, and general industrial applications in all sizes & shapes and also made customised as per requirement. Solid metal gaskets are used in applications where temperatures and pressures rule out the use of traditional gasket materials. FLAT SOLID PLAIN METAL GASKETS: PLAIN SOLID TYPE This style of gasket is made from metal that is recommended for use on machined joints under high pressure and temperature conditions. Solid metal gaskets are best suited for applications such as ammonia fittings , bonnets, heat exchangers, hydraulic more.Flat Solid metal gasket are cut from sheet metal and of unlimited size and shape.To mold metal gasket flat, mating surfaces need to be perfectly aligned to provide good seals. SERRATED GASKETS /CORRUGATED GASKETS: This style of gasket is composed of a solid metal blank, which is fully machined with concentric profile ribbed surfaces.A serrated solid gasket with surface grooves facilitates a good seal with lower seating stresses. These styles can be jacketed to protect the flange surfaces. RING TYPE JOINT GASKETS : This style of gasket is used in numerous industrial applications like in petroleum industry, oil field drilling, pressure vessels, joints, pipes and valves etc.based on the customer required specifications . We are engaged in supplying supreme quality Ring type joint gaskets.Ring joint gaskets are specifically designed accurately to form a metal to metal seal with the flanges. The cross-sections are designed to concentrate the bolt load over a small area to produce a high seating stress; we see to it that our gasket metal is softer than the mating flanges. By applying pressure on the seal interface through bolt force, the softer metal of the gasket flows into the imperfections of the harder flange material, creating a very tight and efficient seal. Ring type Joint Gaskets are designed by us to seal by "initial line contact" or wedging action between the mating flange and the gasket.Our gaskets have passed quality test and of exceptional quality . Varieties of Ring Type Joint Gaskets : Solid Metal API Ring Joint Round Cross Section Solid Metal API Ring Joint Oval Cross Section Solid Metal API Ring Joint Octagonal Cross Section Solid Metal API Ring Joint Oval, Octagonal Cross Section Bx Type RTJ Gaskets Rx Type RTJ Gaskets

Spur Corporation has been supplying Jacketed gaskets to top corporations all over the country.Jacketed gaskets combine the superior temperature resistance of a metal jacket with the sealing performance of a filler material. The filler material is fully enclosed by a two-piece metal jacket, which covers both inside and outside diameters of the jacket and the contact surfaces on both sides. Such gaskets are designed for high temperatures such as Fahrenheit, that is encountered in heat exchangers, boilers and similar type of applications.Heat Exchanger gaskets are more compressible than sole-metal corrugated types and offer better compensation for flange irregularities when high pressures are to be seale.We have adequate capacity to produce any shape and size with many compartmental ribs made out of different materials.They can be used for heat transfer equipment, condensers , coolers, joints etc. We fabricate jacketed gaskets from any metal in any thickness customised to the requirement to provide compressive strength and blow out resistance, depending on the application’s corrosive conditions. For excellent compressibility and resilience, our filler materials for jacketed gaskets include flexible graphite , non-asbestos, ceramic, PTFE and corrugated metal. Jacketed Metal are available in following varieties : SINGLE JACKETED GASKET: This type of gasket is widely used in engineering applications and air tool applications where space is limited, relatively low compressive forces are available for seating the gasket and gasket seating surfaces are narrow.The majority of applications for single-jacketed gaskets are normally 1/4" or less in radial width. DOUBLE JACKETED GASKETS: The application of the Double-jacketed gaskets lies in heat exchanger applications and are the most commonly used style of gaskets. Any material that is commercially available in 26-gauge sheet, and where the service is not critical, this type of gasket are available. Another application of the same lies in standard flanges. SINGLE - JACKETED OVERLAP: Where maximum flange width is approximately 1/4", single-jacketed overlap construction gasket is used. This finds application when the flange width makes it impractical to use a double-jacketed gasket and total enclosure of the soft filler material is required. DOUBLE JACKETED, CORRUGATED GASKET: The double-jacketed corrugated gasket is an improvement on a plain jacketed gasket in the sense that it will provide an additional labyrinth seal in the corrugations on the gasket. A double-jacketed corrugated gasket still relies on the primary seal on the inner lap. It also provides the advantage of reducing the contact area of the gasket, enhancing its compressive characteristics. ONE PIECE, TWO PIECE, THREE PIECE ONE SIDE OPEN, French type gasket: French type gaskets finds application in a one-piece jacketed construction for narrow radial widths not exceeding 1/4" and in two- and three-piece constructions for wider applications. The most commony used French type gaskets are fabricated using copper sheath. When the application requires the outer edge of the gasket to be exposed to fluid pressure, this type of gasket can also be used with the jacket on the external edge of the gasket.

Break liners are consumable surfaces used in Electrical Engines, Mining Equipments, Heavy Duty Industrial Equipments, Lifts & Escalators, Atomic Energy, Automotive Industry, Construction, Oil & Gas, Petrochemicals, Marine Textile and many other such industries.

A gasket is a mechanical seal, which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. source : Wikipedia The most common use of a gasket is to interface between two surfaces to improve the function of the components. Gaskets can be used for many different purposes, such as: sound and noise reduction, hygiene, sealing, anti-vibration, packaging and as supports and mountings or as a safety device.Gasket materials are selected for their characteristics: such as their resistance to chemicals, alkaline, acids, pressures, extreme temperatures, and their ability to withstand different environments (such as deep-sea, mining etc.). In fact, The properties of a gasket are typically those of the material out of which it is manufactured.There are many different materials that gaskets can be made out of.

We have variant Break liners suited for various requirements such as Brake Bands & Pads, Brake Shoe, Clutch Linings, Disc Brake Pads, Friction Disc, Friction Cone & Clutches, Steel Disc, Steel Mating Plates, Press Brake Blocks, Rivets For Brake Pads, Industrial Brake Pads (Asbestos free), Industrial Brake Lining Rolls, Wind Turbine Brake Pads and many more.