Sri Sai Scientific

Ganesh Vihar, Ambala, Haryana

Temperature Range and ControlAvailable with temperature range of 2°C to 8°C However these cabinets can also be made with specific temperature range as required by the customer. For accurate measurement and display of temperature a LED or LCD display is used. These units are equipped with microprocessor based digital control panel which is operated with push buttons. For security and safe working high and low temperature alarm system is used.

Refrigeration SystemEquipped with full functional cold storage facility. Refrigeration system is energy efficient, environment friendly, completely airtight and can be roof top or wall mounted. This refrigeration system can also be installed as remote equipment where noise or heat can be a nuisance. The evaporator is equipped with automaticelectric defrosting. Featuring noise less compressor and air cooled condenser (water cooled condenser on demand) this cooling system provides full value of money.

ConstructionDouble walled construction and made of 304 grades corrosion resistant stainless steel. For insulation high pressure-injected polyurethane is used for minimizing thermal loss and meeting the particular requirements of refrigeration in mortuaries.

Doors

n

n
• Doors are made of stainless steel and fitted with external lock for security. These doors are situated in front and allows easy loading of trolleys. These doors feature lining in odorless rubber gasket and anti-condensation resistors.Internal Lighting
n
• Lighting system comes with waterproof fluorescent ceiling lamps which are fitted with a switch on the control panel.
n

n

AccessoriesSupplied with a number of optional accessories to provide easy accessibility of machines such as casters, Stabilizer, Loading Trolley, Certificate it will also be provided on request.

Made of Mild Steel covered with duly powder coated, complete with HEPA Filter and Pre Filter, motor blowers, static manometer, cock for gas and air or vacuum line. Front doors are made of plexiglass transparent thick sheet built in U.V tube. Work table is illuminated by florescent light. Two table supports are detachable and can be taken out and fixed within minutes. Front door can be kept full open/half open, fully closed as desired. The equipment is fitted with safety attachments of international standards.

OPTIONAL : MICROPROCESSOR BASED DIGITAL CONTROLLER.

FEATURES OF CONTROLLER :

n

n
• U.V LIGHT TIMER UPTO 99 MINUTES.
n
• BLOWER TIMER UPTO 24 HOURS.
n
• U.V AGE DISPLAY.
n
• 9 STEP SPEED CONTROL.5. BUZER ALARM SYSTEM
n

Details :

n
• Static Pass Box made of stainless steel 304 grade, double walled complete with magnetic interlocking system on two doors.
n
• Electro - Magnetic Interlocking on two doors
n
• Door release button with slave display
n
• Access Panel & Limit Switch
n
• Microprocessor based control system with One Master & Inbuilt U.V. hour meter with hour timer reset Option.
n
• UV light, fluorescent light.
n

Water still SSS-L4 and SSS-L4 XL models are designed for reliable continuous operation incorporating a host of features unmatched by comparable stills. It is easy to use, safe to operate, thoroughly reliable and above all Low Cost.

Features

n
• Abundant  Output : The  still  provides 4  litters/hr  of  distilled  waterproduced  through  a  power  input  of  3  KW  by  a  chromium  plated heater housed in a horizontal Glass Boiler.
n
• Distilled  output  is  cool  ensured  by  a  high  efficiency  condenser. Temperature  of  distillate  25°C –  40°C  tested  for  ambient  room temperature of 30° C.
n

Construction

n
• The stand is powder coated for long rust free Operation.
n
• Heater is a 3KW Chromium plated heater fitted with a thermostat, which shuts off automatically in case of water supply failure.
n
• The  Boiler  &  Condenser  are  designed  for  high  efficiency  and provided with threading for easy plumbing of condenser.
n
• Boiler  is  provided  with  Teflon  screw  cork  for  insitu  cleaning  of the boiler.
n
• All plumbing connections to the equipment are made via screw thread connectors
n

Model SSS-L4 XL model has following additional safety features:

n
• Gate Valve: Prevents water wastage.
n
• Flow Switch : For Boiler Safety
n
• On/Off switch with water failure indicator lamp.
n

Packing Info 7 Ply Carton with PUF packing Dimensions: 52 cm x 48 cm x 46 cm. Gross weight: 12.00 kgs. Approx.

Biological Safety Cabinet is specially designed to meet the challenging demands of various scientists for individual and specialized research applications and widely used for day-to-day clean room activities. This Biological Safety Cabinet is installed in research labs of all the branches of medical, agriculture, basic and applied science for cleaning high-risk pathogens, etiological agents, non-volatile radionuclides and limited degree of low toxic chemicals. We specialize in manufacturing, exporting and supplying of both standard and customized models of Biological Safety Cabinet. Clients can avail durable and reliable Biological Safety Cabinet from us in different specifications at industry leading prices.

n

n

Technical Features

n

n
• Nominal inflow velocity of 105 fpm (0.5 m/sec);
n
• Nominal down flow velocity of 55 fpm (0.3 m/sec);
n
• Approximately 70% air recirculation;
n
• Smart-Start System
n
• Night-Smart System that idles the blower when the sash is fully
n
• closed;
n
• Digital display of inflow air velocity
n
• Fluorescent light or UV light control
n
• Control on right-hand side post for manual activation of
n
• blower, light;
n
• 304 grade stainless steel seamless interior
n
• Epoxy-coated mild steel exterior
n
• 99.99% efficient HEPA filters
n
• Fully-closing, clear 1/4" Acrylic sash with two sash handles,
n
• Sash counterbalanced, anti-racking hydraulic mechanism and
n
• 10 degree slope
n
• 21.7" (54 cm) maximum sash opening height and 27.0" (69 cm)
n
• viewing height;
n
• Glare-free fluorescent lighting
n
• 10' (3 m) power cord with plug
n

n
• Bio safety used for safety working with materials contaminated with (or potentially contaminated with) pathogens requiring a deflned biosafety level.
n
• Main Control : Full Digital Microprocessor based monitoring system with touch pad.
n
• Display : Display Back Light LCD Digital Display
n
• Filters 0.3 micron with 99.99% effciency
n
• Pre Filter: Nylon material internal mounted
n
• Working Table: Easy removable plate
n
• Material: S.S. 304 (Inferior)
n
• Cabinet: Outer Body M.S. powder coating
n
• Illumination: Fluroscence or equivatent
n
• UV Lamp for sterilization
n
• Nose Level: Less than 65dbm
n
• Air circulation: Approx 70 percent air recycled (pushed back in the work area through the downflow HEPA filter) and approx 30 percent exhausted through the exhaust HEPA filter
n
• Timer: Electronic digital Timer, 99 min or hold
n
• Audio visual alarms provided-user friendly keyboard and data keeping display
n
• Utility: Outlet, Gas Faucet, Vacuum Faucet, Power Sockets
n
• Door: Sliding Glass Door, Stratied Safety Glass, Tempered Safety Glass
n
• The product offered shall be designed to be stored and to operate normally under the power supply: 220-240V/50Hz AC single phase.
n

These Biological Safety Cabinets are Class II TYPE A2and are designed for universities, research laboratories, pharmacies and pharmaceuticals companies to protect both users and procedures from contamination when working with biological fields.

How it Works : Minimum airflow velocity is 100 fpm (0.51 m/s) through face opening. HEPA flltered downflow air is a portion of the mixed downflow and inflow air from a common exhaust plenum. All contaminated ducts and plenums are under the negative pressure.

Positioned amidst the foremost Manufacturers, Exporters and Suppliers of Pharmaceutical Tray Dryer; we are customers’ reliable choice in this sphere. The offered Pharmaceutical Tray Dryer is designed in the state of the art unit using cutting-edge technology. Staffed with pool of professionals; they makes certain that the Dryer is sternly examined on several quality parameters.

More About Pharmaceutical Tray Dryer :Standard sturdy double walled fabrication wherein inner chamber is made of polished stainless steel and outer chambers made out of thick mild steel sheet. Outer body painted with superior quality powder coating. Gap between the two walls is filled with glass wool for better temperature insulation. Heavy duty air blower is provided to constantly circulate hot air to achieve uniform temp. In the whole Chamber Double wall door is mounted on heavy hinges provided with heavy molded latch. Temperature is controlled by digital PID temperature controller. Temperature range - 50^oC to 100^oC.

n

n

Technical Specifications :

n

n
• Triple wall construction
n
• Inner chamber of stainless steel
n
• Outer body made of mild steel with powder coating
n
• Aluminum trays of size 16”x32”x1.5”
n
• Tray capacity : 48 trays (can be increased or reduced as per requirement)
n
• Temperature controlled by microprocessor based PID controller
n
• “U” type SS heaters for longer life an easy replacement of the same.
n
• Heavy duty aluminum blower fitted on top for uniform drying.
n
• Unit mounted on castor wheels for ease of the movement of unit.
n
• Air inlet and outlet arrangement fitted with air filter.
n
• Total load of the unit : 4.5-6KW
n
• Unit workable on 220/440 volts AC
n

Tablet Making Machine is built on heavy cast body with centric pressure system steeliness steel hoper provided. For thickness and hardness of tablets with nuts and locknuts, it is connected by a robber tube easy setting. We also make available heavy duty electric model along with necessary tool die and set of two spanners. For making tablets, it has a wheel which is easy to rotate.

Features :

• Easily rotating wheel for making tablets.
• Compressing lever for adjustable harness of tablets.
• Adjustable lower punch for adjusting the thickness.
• Stainless steel day and punch size 6, 9, 12mm.
• Net weight approximately 65k.g
• Electrical model can be provided in same with ½h.p motor.
• Industrial use tablet machine can be provided on order

We manufacture high quality Rotary Shaker. It body is made out of thick mild steel, which is finished in staving enamel paint. Heavy-duty motors of suitable capacities are provided for long time, continuous operation. Fixed speed and variable speed models are offered. Platform is provided with rubber discs to hold flasks. To work on 220 V AC SO Hz single phase.

Capacity  

• 25 flasks x100ml
• 15 flasks x 250ml
• 25 flasks x 250ml
• 36 flasks x 250ml
• 49 flasks x 250ml
• 81 flasks x 250ml
• 81 flasks x 500ml

Optional : 0-60 minutes timer

MAGNETIC STIRRER WITH HOT PLATE, WITH TEMPERATURE REGULATOR SUITABLE FOR STIRRING AND WITH VARIABLE SPEED CONTROLLER.

retort ring made of mild steel rod, powder coated with t screw

HEATING MANTLES DESIGNED TO MEET THE HIGHEST ELECTRICAL STANDARDS. THE FLEXIBLE MANTLE IS SUSPENDED ABOVE A THERMAL INSULATING 'FORMER' WHICH PROVIDED MAXIMUM HEAT TRANSFER COUPLED WITH MINIMUM RISK OF FLASK BREAKAGE.
THE OUTER HOUSING IS CONSTRUCTED OF ALLUMINIUM OR MILD STEEL, FINISHED WITH HEAT & MARR RESISTANCE POWDER COATING, WHICH IS CONJUCT THE INSTLATION. TO ENSURE A SAFE, LOW OUTER CASE TEMPERATURE.
ALL MANTLES HAVE INDICATOR LIGHTS TEMPERATURE CONTROL REGULATOR7 ACORD.

retort stand made of mild steel sheet, bend type powder coated

Growing with the dynamic needs of clients, we are engaged with providing a wide array of Laboratory Glassware to our customers. We go all out to retain the quality we are treasured for. For that purpose, our quality auditors strictly match the quality to industrial quality grades to ensure our quality doesn’t see a drop. This bundle of quality is on offer at affordable rates.

The oil immersed gear box of 12” dia stainless steel with F.H.P. motor drive air blower operates independently. Tablet Coating Pan thermostatically controls the air to maintain the temperature from 30 to110C. The switches of motor blower heater and thermostat are there on panel neon indigator. It comes in light body as well as heavy body with 1/2HP motor and gear box. Such quality is offered at marginal rates.

We offer superior quality cold Fogger suited to the application of spraying water & water based liquids in fine particle form for disinfection, sterilization, odour control, germ control, etc. The Fogger runs on a high speed FHP Motor that provides maximum thrust of spray suitable for fogging. All models of Fogger are portable products. The entire body of Fogger is made of Aluminum Alloy and internal components are made of materials that resist corrosion and chemical attack. The Fogger has a four liters storage tank, sufficient to dispense chemical combinations in various proportions. This Fogger is, thus, an ideal unit for all fogging applications.

Capacity

• Fogger Complete S.S Tank With Timer : 6.5 liters
• Fogger Complete Plastic Tank With Timer : 7.5 liters

rota mantle is a combined mechanism. in this unit magnetic stirrer is fixed beneath the heating mantle.

We offer premium quality double walled Deep Freezer. The outer part of the Deep Freezer is made of CRC and painted with powder coating or made of elegantly pre painted sheets. The inner side of the Deep Freezer is made of SSAlluminum foil chemical resistance shiny and plastic moulded sheet. Temperature range of this Deep Freezer is -20 Deg C. Cooling in the Deep Freezer is done by cascade system using two refrigerant compressors. PUF Insulation is provided between two walls. The body of this Deep Freezer is mounted on sturdy structure with castor wheels. This Deep Freezer is also fitted with digital controller cum indicator and is provided with 3-step stabilizer. The Deep Freezer is available in chest type (Horizontal) and upright (Vertical) shape. 23 compartments or shelves are provided in both types. The Deep Freezer works on 230V0lts AC and if required it can be supplied 110Volts AC.

Size :

• 4 Cuft.
• 6 Cuft.
• 10 Cuft.
• 12 Cuft.
• 15 Cuft.