Post Buy Requirement
SE
Pune, Maharashtra, India
Add Review

Our Products

  1. Measuring Instruments & Equipment 13 Products available
  2. Domestic Fans, AC & Coolers 3 Products available
  3. Gas Analyzers 5 Products available
  4. Industrial Valves 6 Products available
  5. Others 56 Products available

Other Products / Services

Vortex Flowmeter

Vortex Flow Sensor for Water
The VF-2000 flow sensor body and shedder bar (vortex generator) are molded as one component. Sensor body is made of PPS (Polypylene Sulphide) and is designed to eliminate deposits. A combination of straight flow path and shedder bar gives a lower pressure loss compared with other types of Polypylene Sulphide flowmeters.



Features
Simple and Compact Design: The VF-2000 flow sensor body and shedder bar (vortex generator) are molded as one component. This design approach has reduced the cost as well as the size and weight of the flowmeter. Sensor body is made of PPS (Polyphenylene Sulphide) and is designed to eliminate deposits.
No Maintenance Cost: The VF-2000 has no moving parts, no maintenance is needed.
Low Pressure Loss: A combination of straight flow path and shedder bar gives a lower pressure loss compared with other
types of flowmeters
Display Model with Current and Alarm Output: 3-digit LED display for flow rate, current output and alarm outputs (2-point) are provided in compact design.
CE Marking: The VF-2000 meets the EC directive for CE mark.

View Complete Details

Nox Analyzer

The Model 9110E uses the proven chemiluminescence detection principle, coupled with state-of-the-art microprocessor technology to provide the sensitivity, stability and ease of use needed for ambient or dilution CEM monitoring requirements. The analyzer uses multi-tasking software which allows complete control of all functions while providing online indication of important operating parameters. Measurements are automatically compensated for temperature and pressure changes. In addition, stability is enhanced by an Auto-Zero circuit that continuously provides a true zero reference. The result is sensitive, accurate, and dependable performance under the harshest operating conditions.



Features


0-50 ppb to 0-20 ppm ranges, user selectable
Independent ranges for NO, NO2, NOX
Microprocessor controlled for versatility
Multi-tasking software allows viewing of test variables while operating
Continuous self checking with alarms
Permeation drier on ozone generator
Dual bi-directional RS-232 ports for remote operation (optional RS-485 or Ethernet)
Digital status outputs provide instrument condition
Adaptive signal filtering optimizes response time
Temperature and pressure compensation
Converter efficiency correction software
Continuous automatic zero correction
Catalytic ozone scrubber
Internal zero and span check (optional)
Internal data logging with 1 min to 365 day multiple averages (up to 1 million records)

View Complete Details

Ultra Trace Flourescent Analyzer

Model 6400E uses the proven UV fluorescence principle, coupled with state-of-the-art microprocessor technology to provide accurate and dependable measurements of low level S0 2.
Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity.



Features



  • Ranges are 0-50 ppb to 0-20 ppm, user selectable

  • Dual ranges and auto ranging

  • Microprocessor controlled for versatility

  • Multi-tasking software allows viewing test variables while operating

  • Continuous self checking with alarms

  • Dual bi-directional RS-232 ports for remote operation (optional RS-485 or Ethernet)

  • Digital status outputs indicate instrument operating condition

  • Adaptive signal filtering optimizes response time

  • Temperature and pressure compensation

  • Internal Zero & Span check (optional)

  • Internal data logging with 1 min to 365 day multiple averages

  • Critical orifices provide flow stability

View Complete Details

Opacity Analyzer

The DSL-340 Dust Monitor uses the innovative Dynamic Detection Principle (DDP) to measure dust, smoke and particulate concentration present in an exhaust gas flow in a duct, stack or flue. A light beam emitted from the Transceiver (TRX) passes across the duct, stack or flue to a Reflector, which returns the light beam to the TRX. Particles moving through the beam will cause fluctuations in the intensity of light received by the TRX. When calibrated against standard reference measurements, the magnitude of the signal variation relates directly to the dust, smoke and particulate concentration.



Features


In-situ measurement directly in exhaust gas flow
Innovative Dynamic Detection Principle, (DDP), measurement technique
Measurement reading as mg/m3 (when calibrated against
standard reference measurements)
Choice of interface options enabling easy integration into plant control system
Free utility software for PC based setup, control and data logging
Optional Operator Interface with different mounting configurations
IP65 rated external enclosure



View Complete Details

High Pressure Reducer

VRTS is used to reduce the sample pressure from 400 bar to 3 bar



Features




  • Rod-In-Tube Pressure Reducer




  • Designed for High Pressure 400 Bar, Temperature : 650 Degree Celsius




  • Outlet pressure 0 to 30 Bar Adjustable.




  • Built-in Thermal Shut-off Valve




  • Built-in Pressure relief valve




  • Built-in Temp contacts




  • Online grab sample valve




  • Online blow down valve



  • No Filters Required.


  • 6 components in one assembly.


  • Maintenance free with online cleaning arrangement.

View Complete Details

Continuous Particulate Monitor

The Met One Instruments Model BAM-1020 has longstanding U.S. EPA designation as a Federal Equivalent Method (FEM) for continuous PM10 particulate monitoring. In addition, the BAM-1020 is the worlds first instrument to obtain
U.S. EPA FEM designation for continuous PM2.5 monitoring, when configured with the specified settings and accessories. The BAM-1020 has also obtained corresponding certifications in other countries and regions.



Features


U.S. EPA Federal Equivalent Method for PM10 and PM2.5 monitoring
Long term unattended remote operation of up to 60 days
between site visits
Very low operating costs
Automatic hourly span checks
Fast and easy field audits using common FRM audit tools
Bench top or equipment rack mounting in mobile or
stationary shelters
Rugged anodized aluminum, stainless steel, and baked
enamel construction
Highly accurate, reliable, and mechanically simple flow system
Hourly filter advances minimize effects on volatile compounds
Advanced Smart Heater technology precisely controls sample
relative humidity
Integrated datalogger allows the connection of up to six
additional meteorological sensors
Internal memory provides up to 182 days of digital data storage
Data retrieval through RS-232 serial ports using direct PC
connections, modems, printers, or digital data collection systems

View Complete Details

Alkalinity Analyzer

Model 6800 Alkalinity Analyzer utilizes a direct measurement of Alaklinity measurement. Unlike titration method, the 6800 measures the CO2 Concentrations derived from ananlysis of Total Inorganic Carbon (TIC), using interference-free infrared technology. Both methods are compatible, since each uses the same stochiometric relationships. For convenience in relating the technologies, phenolphthalein alkalinity id determined.



Features



  • Alkalinity/Direct Detection Method

  • Avoids Titrimetric/Colorimetric Procedures

  • Reports Total Alkalinity

  • Requires No Probes

  • Integrates with Teledyne TOC Platform

  • Interference Free Analysis

  • Completely Automatic

  • Rapid Response


View Complete Details

Sentinel Analyzers

Teledyne offers two proven standard sensor configurations as functioning receptacles for its Oxidation Reduction Potential (ORP) cartridge. The SP-1 immersion or the SP-2 valve retractable sensors come in a variety of materials to further enhance the resistance of aggressive corrosion aqueous media and can be ordered in varying lengths to meet installation requirements.



Features



  • Teledynes ORP electrode and sensor have a low physical
    profile (3/4 dia) that allows for greater ease of insertion into
    potentially high flow rate/pressure pipelines. Selectable sensor
    housing lengths allow for reaching deep aeration basins or
    vats.

  • The ORP electrode (cartridge) is replaceable (as a component
    of the sensor) at a much lower life cycle cost than that of the
    competition. The sensor has a preamp (signal conditioner)
    integral to the sensor that provides a cleaner signal for
    transmission over longer cable lengths.

  • Attempting to measure ORP with a pH electrode will yield
    an unacceptable offset in mV. An oxidizing agent such as
    quinhydrone (cyclohexadiene) must be added to the buffer
    to develop a measurement standard. Being acidic, the
    quinhydrone must be used @ 7pH or less (4pH). This, then,
    will approximate a correct mV reading of 59.1 per decade.

View Complete Details

Combustion Efficiency Analyzer

Teledyne's Max 5 Combustion Efficiency Analyzer is the quick and easy way to fine tune boilers, furnaces, fireboxes and any commercial or industrial combustion process. With the Max 5's logical design and simple controls, it's easy to obtain money saving combustion efficiency. At the push of a button, this unit calculates efficiency and displays the results of burner adjustments without the need for charts or tables. In addition, the unit is compact and completely portable, making it convenient to spot check in the most difficult locations.



Features


Measures O2, CO, combustibles, temperature;
calculates CO2 and net efficiency
NiCad battery powered with built-in AC charger
15 foot (4.5 meter) sampling hose
Auto calibration of O2 sensor
Auto zero of combustible and CO sensor
RS-232C serial data output
Storage capability for 20 sets of data
Low battery indicator

View Complete Details

Process Analyzers

We offer the worlds largest range of moisture and hydrocarbon dew-point analyzers for the oil, natural gas, refining and power industries. Customers can choose from standard systems or analyzer and sampling packages designed to meet their specific needs. Our process analyzer systems measure trace moisture within hydrocarbon gases and liquids as well as hydrocarbon dew point in natural gas using our patented Dark Spot technology. We can create analyzer systems which measure one or a combination of these and other parameters.



View Complete Details

Portable Hygrometers

This group of portable dew-point meters are designed for fast, accurate and stable measurement of dew point, relative humidity and moisture concentration. They are built to a rugged construction suitable for demanding industrial applications.
All instruments in our range of portable and hand-held hygrometers are traceable to National Standards.

View Complete Details

Precision Hygrometers








Many applications need reliable and precise measurement of trace moisture, moisture content and dew point in gases to operate efficiently and effectively. Our chilled mirror and quartz crystal microbalance precision hygrometers provide peace of mind where the accuracy is essential, in applications ranging from laboratory-based to demanding industrial processes such as metal heat treatment.


Datasheets


































Optidew - High Performance Optical Dew-Point Transmitter



Optidew Vision - Fundamental, Accurate and virtually Drift-Free Dew-Point Measurement



S4000 Remote - Precision Laboratory Dew-Point Hygrometer



S4000 TRS - Precision Dew-point Hygrometers



S8000 Integrale - High Performance Chilled Mirror Dewpointmeter



S8000 Remote - High Precision Chilled Mirror Hygrometer



S8000 RS - High-Precision Chilled Mirror Hygrometer



View Complete Details

Relative Humidity Instruments

Maintaining the right level of humidity is critical in many situations, each of which has its own set of requirements. Our wide range of relative humidity sensors, transmitters and probes allows customers to choose the right fit for their applications.

View Complete Details

Shelters Steam Equipments

Shelters Steam Equipments offers a wide range of shelter types and configurations that can be customised to your exact needs. We have rich experience in the design, construction, installation, commissioning and maintenance of AAQMS for all environments from the hot tropical climate to the freezing cold climate. Steam Equipments have many strong partnerships throughout the world with distributors who have strong technical experience with air monitoring equipment and have been factory trained by Steam Equipments.
View Complete Details

Moisture Calibration Instruments

This group of portable dew-point meters are designed for fast, accurate and stable measurement of dew point, relative humidity and moisture concentration. They are built to a rugged construction suitable for demanding industrial applications.
All instruments in our range of portable and hand-held hygrometers are traceable to National Standards.

View Complete Details

Steam And Water Analysis System

Features



  • Truly designed as per ASME PTC 19.11 recommendations

  • Compact double helix type, shell & tube sample coolers

  • First time All the High Pressure components upto
    Pressure reducer can withstand temp. upto 550deg C. (i.e.
    Valve to Pressure reducer)

  • Automatic High Temp. Shut-off valve are used for high
    temperature protection

  • The Entire system is protected upto 600Deg F upto High
    Temp. Sample Shut-off valve

  • No Power Supply required. No wiring !!!!!

  • Rod-in-Tube type pressure reducer for High pressure
    sample lines as recommended by ASME PTC 19.11

  • On line pressure regulator cleaning

  • No Filters are used

  • Back pressure regulator with Stainless steel diaphragm

  • Easy access of components.

  • Stainless Steel Cooling water pipeline

  • Totally Maintenance free

View Complete Details

Pressure Reducer

Steam Equipments High pressure reducer is designed for high pressure boiler sampling lines above 35 Kg/Cm2 with inlet pressure upto 375 Kg/Cm2 and outlet pressure totally adjustable These type of pressure reducers are recommended by ASME 19.11-1997 steam and water sampling, conditioning & analysis in power cycle.



Features




  • Rod-In-Tube Design




  • NO FILTERS REQUIRED




  • Designed for High Pr. upto 400 Bar




  • Outlet pressure 1 to 30 Kg/cm2 Adj.




  • Design Temperature : 350C




  • Designed in accordance with ASME-PTC 19.11 recommendations




  • ON-LINE Cleaning (In-Situ) by retracting the rodswithout disconnecting the sample line




  • No Spring or diaphragms used




  • No valve plug, or Valves Seat



  • No Filters Required.


  • Maintenance free.


  • ON-LINE Cleaning (In-Situ) by retracting the rods without disconnecting the sample line

View Complete Details

Resin Columns

Features



  • Slim Design for better performance

  • Color indicating type resin

  • Optional quick-disconnecting kit

  • Corrosion resistant

  • Designed for Max Pressure

  • up to 6 Bar

  • Design Temperature : 80 deg. C

  • Easy replacement of resin

View Complete Details

High Pressure Sample Filter

Features




  • Compact T type Design




  • Spring Loaded, Easy cleaning & Maintenance




  • Optional Blowdown facility & Online cleaning arrangement




  • Compact Design




  • Designed Pressure 250 Bar




  • Designed Temperature 550 C




  • 40 Micron Filter element




  • Stainless Steel Constructione



View Complete Details

Stream Selector Unit

This STREAM SELECTOR UNIT is based on a popular 8-bit Microcontroller. The system is designed to control the timing of stream selection of up to eight streams system using its timer and relay outputs. It also generates Sample and Hold analog outputs for each channel.



Features



  • Slim Design for better performance

  • Color indicating type resin

  • Optional quick-disconnecting kit

  • Corrosion resistant

  • Designed for Max Pressure

  • up to 6 Bar

  • Design Temperature : 80 deg. C

  • Easy replacement of resin


View Complete Details

Air Cooled Chiller

  • Voltage 440V
  • Type Fully Automatic
  • Category Cooling & Heating
  • Power Source Electric
  • Dimension(L*W*H) 550mm x 550mm x 600mm
  • COPELAND/Maneurop COMPRESSOR

The most compelling reason for a chiller is the protection it provides to your valuable process equipment applications. A chiller commonly represents a small fraction of the cost of the processing equipment, yet it provides solid protection of your investment, 24 hours a day, 7 days a week for years and years to come.

View Complete Details

Analyser

The treatment of water utilized in a power is critical for reducing boiler failures. As boilers generate steam or water is evaporated by a cooling tower, dissolved minerals accumulate and eventually lead to corrosion of boiler tubes and heat exchanger leaks. To properly control and conserve the chemical additives used to inhibit the costly build-up of deposits, and to determine appropriate boiler blow down schedules, continuous on-line pH and conductivity monitoring of boiler and cooling water is essential.



Features



  • Graphics Display

  • Process Measurements

  • Process Controller

  • Pre-pHault Diagnostic & Hart Communications

  • Smart Transmitters

  • Durable / Cost Savings Approach

View Complete Details

Food Package Analyzer

Model 9070 Food Package Analyzer is an ideal unit for spot checking gas measurements within food containers for ongoing validation of packaging machines.
After inserting the sample probe into a package or container, the 9070 automatically draws a sample and displays the lowest reading of oxygen and the highest reading of carbon dioxide. There is no need to touch a key or button during the analytical process.



Features




  • Two isolated, linearized 4-20 mADC outputs




  • Computer / printer interface for data




  • Self diagnostic alarm




  • LCD display content options




  • One user-programmable alarm relay




  • Accessory kit for various applications



View Complete Details

Ultraviolet Photometric Analyzer








Series 6000 Microprocessor Controlled Ultraviolet Photometer is designed to provide continuous on-line analytical data of critical process conditions and eliminate time consuming laboratory analysis. This analyzer can be configured to measure at any wavelength within the ultraviolet or visible portions of the electromagnetic energy spectrum.
Since numerous gases and liquids have a useful absorbance peak in the ultraviolet region, a wide variety of applications are possible.


Features


Microprocessor based, high resolution, ultra stable elevvctronics (no potentiometers)
Three user-selectable ranges
Signal & Range ID output: 0-1 VDC and 4-20 mADC (isolated)
Programmable auto ranging
Range ID contacts (quantity 4) Form A normally open contacts, 3A@250 VAC resistive
Two adjustable concentration alarm set points with programmable relay function Form C contacts, 3A@250 VAC resistive
Programmable auto calibration with mode ID Form A normally open contacts
Remotely operated calibration (customer supplied valves and 24 VDC signal)
Self diagnostics with Form C failure contacts
Full duplex RS232 communication link
Power: 115/230 VAC 50/60 Hz


View Complete Details

Hosedown Station

The TOT-Hosedown Station has been designed to put the safety of your operators first, thanks to it's innovative technology. The system utilizes a thermal element located in the downstream leg of the mixing valve. The thermal element is designed to throttle steam flow should the temperature set point be exceeded and will completely shut down at 15F above set point or if cold water flow is interrupted. The thermal element will not re-open until cold water flow is restored.



Features



  • Safe operation: auto shut-off of steam if cold water flow is interrupted

  • In-line field serviceable mixing valve:

    • cartridge element can be easily cleaned or replaced in minutes, making the washdown station work like new again



  • Provided with heavy duty globe valves for independent throttling, allowing for cold water only or independent adjustment of water temperature

  • Check valves, stainless steel thermometer, globe valves and stainless steel hose rack, standard with all units

  • Designed to fit in place of standard industrial hose stations

View Complete Details

Shelters

Steam Equipments offers a wide range of shelter types and configurations that can be customised to your exact needs. We have rich experience in the design, construction, installation, commissioning and maintenance of AAQMS for all environments from the hot tropical climate to the freezing cold climate. Steam Equipments have many strong partnerships throughout the world with distributors who have strong technical experience with air monitoring equipment and have been factory trained by Steam Equipments.



Features



  • Small compact stations

  • Large fixed stations

  • 20ft shipping container style stations

  • Cyclone proof compact stations

  • Relocatable caravan stations (moved from site to site)

  • Mobile stations (can drive through traffic measuring pollution in real time)


View Complete Details

Single Sensor Sample Draw Manifold









Detcon Model SD-1-N7 is a single sensor sample draw manifold designed for use with any one of a number of gas detection sensors including combustible gas, hydrogen sulfide, oxygen and a long list of toxic compounds. The sampling system utilizes an internal pump to draw air and gas samples from a remote location and flow the sample across the sensor at a metered flow rate. In use, the sample draw method allows for remote calibration and routine maintenance without exposing maintenance personnel to dangerous or difficult to access sampling areas. Sampling time is a function of the distance between the sample point and the sample draw manifold. Detcon Model SD-1-N7 is housed in a NEMA 7 explosion proof enclosure and is suitable for installation in hazardous locations: Class I; Division 1; Group C & D. The hazardous area rating allows for installation with a minimum distance to the sample point, which decreases delays in real time sampling.


Features


  • Input/output in-line flame propagation barriers




  • Power input and flow fault LED indicators




  • Flow fault fail-safe supervision




  • In-line sample input moisture filter





View Complete Details

Pressure Reducers

High pressure reducer is designed for high pressure boiler sampling lines above 35 kgcm2 with inlet pressure upto 375 kgcm2 and outlet pressure totally adjustable these type of pressure reducers are recommended by asme 19.11-1997 steam and water sampling, conditioning & analysis in power cycle.
View Complete Details

Thermal Conductivity Transmitter

The Model 2000XTC Transmitter resets the standard for thermal conductivity detector based applications within the process control industry. As an intrinsically safe transmitter, packaged within a rugged, weatherproof housing, the 2000XTC is suitable for use in harsh, hazardous outdoor environments. Using a novel, solid-state thermal conductivity sensor, this cost-effective transmitter can be configured to detect H2, He, N2, Ar, CO2 or a number of other gases of interest in binary or multi-component sample gas mixtures.



Features


Customer selectable gas constituents; 11 gases, 110 combinations

Automatic linearization

Auto-ranging with manual override to lock into specific range

Alphanumeric display which prompts and informs operator

Auto and remote initiated calibration capabilities

Bi-directional RS-232 serial digital communication port

Extensive self-diagnostic capabilities

2 x programmable concentration alarm and system failure alarm relays

View Complete Details

Calorimetric Analyzers








The LXT 600 Series Analysers are a family of on-line sequential sampling analysers that use Colorimetric or Ion Selective Electrode (ISE) technologies to perform an analysis. The analysers can be configured to perform most colorimetric or ISE based laboratory analysis that use up to four reagents.


Features

  • Simple
    Easy Installation User Friendly Menu Structure Touch Screen Interface Easy Process Configuration

  • Reliable
    Epoxy Powder Coated Rugged Cold Rolled Steel Cabinet Two Seperate Compartments (Electronics & Hydraulics Loss of Sample & Low Reagent Alarms)

  • Cost Effective
    Low Maintenance Adjustable Cycle Time to Minimize Reagent Uages



View Complete Details

Back Pressure Regulator

Steam Equipment's back pressure regulator is designed for gas or liquid service to control the inlet pressure. It is used to maintain the constant pressure in sampling system or act in a relief valve capacity.

These BPRV are used in Steam & Water Analysis Systems, Instrumentation systems, etc.



Features



  • High Pressure capability upto 10 Kg/Cm2

  • Suitable for corrosive applications

  • Low operating torque

  • Compact design

  • Highly sensitive, Diaphragm Type

  • Stainless steel body material

  • Accurate adjustment

View Complete Details

X-ray Fluorescence Analyzer

The ability to monitor the concentration of an analyte in a process stream is critical for accurate and reliable process control. There are
many techniques used to determine the analyte concentration of interest. One of the most sensitive sensing techniques is molecular fluorescence. Fluorescence occurs when a molecule absorbs light energy, either ultraviolet or visible, and rapidly emits light, at some longer wavelength. Fluorescence of this type is referred to as Stokes fluorescence. Fluorimetry characterizes the excitation and emission properties of the molecular species.

View Complete Details

Optical DO Analyzer

The LXT-220-D08 optical dissolved oxygen sensor uses a fluorescence quenching method to determine the oxygen concentration in water. The use of this Optical Dissolved Oxygen method by the LXT-220-D08 minimizes maintenance, increases reliability and improves the long term accuracy of the measurement. Combine this improved measurement technology with the rugged, easy to install design and the LXT-220-D08 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water.



Features


Optical technology
Minimum maintenance
Long maintenance intervals
Stable measurement
Maximum measurement accuracy

No flow needed
Measurement possible in still water

Intelligent sensor
Self monitoring
Storage of calibration data in sensor

Digital data transmission
Insensitive to electromagnetic interferences

Dual Channel Capability
Lower Cost - 2 DO8 sensors per analyzer

View Complete Details

Total Sulfide Analyzer

The Model 6200E Total Sulfides Analyzer utilizes proven UV fluorescent technology to continuously detect sulfides found in inert gas streams. An internal, quartz catalytic converter is employed to convert the sulfides, when mixed with scrubbed ambient air, into SO2 via high temperature oxidation.
An internal vacuum pump is employed to draw both the sample and the ambient air into the converter. The converted sample gas is fed to the fluorescence chamber where it is then exposed to ultra-violet radiation.



Features


High sensitivity with user selectable ranges from 0-50 ppb to 0-20 ppm
Microprocessor controlled, providing advanced user interface capabilities
Built-in data acquisition capability using the analyzers own RAM
Extremely high-end self diagnostic capability providing continuous self checking with continuous warning alarms
Bi-directional RS-232C for remote operation
Critical orifices provide flow sensitivity
High temperature TRS converter
Digital status outputs provide instrument condition
Easy to read display
Proven UV fluorescence technique

View Complete Details

Trace And Percent Oxygen Transmitter

The INSTA TRANS O2 transmitter. By applying lessons learned from our Series 300T & 300P intrinsically safe oxygen transmitter designs introduced in the late 1980s, and adding those parameters required by todays users, the Insta Trans offers unprecedented:
Flexibility
Ease of use
Quick recovery on ppm O2 applications (when changing out sensors)
Reliability
Cost effectiveness



Advantages


Built-in digital display
Insta Trace oxygen sensor (ppm appls)
Simple intuitive controls
Easy field calibration and range selection
SS or nylon wetted parts
Weather tight NEMA-4 construction
Intrinsically safe operation (optional)
Reverse voltage protection and temp compensation
Digital electronic control circuitry with permanent SPAN setting memory

View Complete Details

Heat Actuated Trap

Since HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems. The unique ram-style plug & seat provide reliable, tight shut off longer than any other design available.



Design Features


* Stainless body, fittings, spring and plug
* Corrosion resistant - Long service life
* Most narrow temperature band available
* Compact, low mass - Fast response
* Ram-type plug for tight reliable shutoff
* Downstream actuator for greater sensitivity
* Sensitive to temperature only
* Unaffected by pressure variations
* Easy installation with pipe wrench
* Discharges the minimum amount of water required to prevent freeze damage

View Complete Details

Tube Valve Heat Actuated Trap

These valves save space, eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug & seat provide reliable, tight shut off longer than any other design available. TV/HAT valves are covered with our standard 36 month warranty & service policy to further reduce maintenance cost. Since TV/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.



















Design Features

* Compact, low mass for fast response
* Corrosion resistant for long service life
* Stainless steel body, fittings, spring and plug
* Ram-type plug for tight, reliable shutoff
* Eliminates live steam losses
* Operates in narrow temperature band
* Downstream actuator for greater sensitivity
* Operating temperatures unaffected by pressure
* Wide choice of set-points





View Complete Details

Diverting Valve

The Therm-Omega-Tech Model M/D temperature control valve is designed for 3-way mixing or diverting applications. For fast response, the valve is compact and low mass. Therm-Omega-Tech's valves are designed around our exclusive Thermoloid sensor/controller that automatically and accurately proportions the flow in response to fluid temperature. The Thermoloid sensor/controller is the most advanced and reliable thermal actuator of its type available today.



Design Features


* Open Temperature: 55F Temperature Set Point
* Temperature Control Valve - All 316 Stainless Steel

View Complete Details

Steam Control Valve

The TV/SC-A can be used to turn on steam, air, gas or liquids compatible with Teflon and stainless steel in response to ambient temperature change. Applications include the automation of steam tracing lines, operation of pneumatically operated pumps for injection of antifreeze liquids, instrument enclosure control, etc. The TV/SC-AR (reverse-acting) can be used to regulate the flow of glycol, water or other cooling media; or can automate cooling sprinklers and cooling baths, etc.



Design Features


* Narrow temperature band
* Compact low mass for fast response
* Ram-type plug for reliable shut-off
* Unaffected by pressure variations
* Quick and easy installation
* Compatible with standard tubing and connections
* Long service life (36 month pro rated warranty)
* Large flow coefficient (Cv)
* Direct acting (no pilot valve)

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rasheed Syed (Steam Equipments Pvt Ltd)
  • PLOT NO – 44, TINY INDUSTRIAL ESTATE KONDHWA BUDRUK, PUNE – 411048, Maharashtra
  • Share us via
Nox Analyzer Ultra Trace Flourescent Analyzer Retailer from Pune, Maharashtra
Post Buy Requirement
SE
Pune, Maharashtra, India
Add Review

Our Products

  1. Gas Analyzers 5 Products available
  2. Industrial Valves 6 Products available
  3. Measuring Instruments & Equipment 13 Products available
  4. Domestic Fans, AC & Coolers 3 Products available
  5. Others 56 Products available

Other Products / Services

Vortex Flowmeter

Vortex Flow Sensor for Water
The VF-2000 flow sensor body and shedder bar (vortex generator) are molded as one component. Sensor body is made of PPS (Polypylene Sulphide) and is designed to eliminate deposits. A combination of straight flow path and shedder bar gives a lower pressure loss compared with other types of Polypylene Sulphide flowmeters.



Features
Simple and Compact Design: The VF-2000 flow sensor body and shedder bar (vortex generator) are molded as one component. This design approach has reduced the cost as well as the size and weight of the flowmeter. Sensor body is made of PPS (Polyphenylene Sulphide) and is designed to eliminate deposits.
No Maintenance Cost: The VF-2000 has no moving parts, no maintenance is needed.
Low Pressure Loss: A combination of straight flow path and shedder bar gives a lower pressure loss compared with other
types of flowmeters
Display Model with Current and Alarm Output: 3-digit LED display for flow rate, current output and alarm outputs (2-point) are provided in compact design.
CE Marking: The VF-2000 meets the EC directive for CE mark.

View Complete Details

Nox Analyzer

The Model 9110E uses the proven chemiluminescence detection principle, coupled with state-of-the-art microprocessor technology to provide the sensitivity, stability and ease of use needed for ambient or dilution CEM monitoring requirements. The analyzer uses multi-tasking software which allows complete control of all functions while providing online indication of important operating parameters. Measurements are automatically compensated for temperature and pressure changes. In addition, stability is enhanced by an Auto-Zero circuit that continuously provides a true zero reference. The result is sensitive, accurate, and dependable performance under the harshest operating conditions.



Features


0-50 ppb to 0-20 ppm ranges, user selectable
Independent ranges for NO, NO2, NOX
Microprocessor controlled for versatility
Multi-tasking software allows viewing of test variables while operating
Continuous self checking with alarms
Permeation drier on ozone generator
Dual bi-directional RS-232 ports for remote operation (optional RS-485 or Ethernet)
Digital status outputs provide instrument condition
Adaptive signal filtering optimizes response time
Temperature and pressure compensation
Converter efficiency correction software
Continuous automatic zero correction
Catalytic ozone scrubber
Internal zero and span check (optional)
Internal data logging with 1 min to 365 day multiple averages (up to 1 million records)

View Complete Details

Ultra Trace Flourescent Analyzer

Model 6400E uses the proven UV fluorescence principle, coupled with state-of-the-art microprocessor technology to provide accurate and dependable measurements of low level S0 2.
Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity.



Features



  • Ranges are 0-50 ppb to 0-20 ppm, user selectable

  • Dual ranges and auto ranging

  • Microprocessor controlled for versatility

  • Multi-tasking software allows viewing test variables while operating

  • Continuous self checking with alarms

  • Dual bi-directional RS-232 ports for remote operation (optional RS-485 or Ethernet)

  • Digital status outputs indicate instrument operating condition

  • Adaptive signal filtering optimizes response time

  • Temperature and pressure compensation

  • Internal Zero & Span check (optional)

  • Internal data logging with 1 min to 365 day multiple averages

  • Critical orifices provide flow stability

View Complete Details

Opacity Analyzer

The DSL-340 Dust Monitor uses the innovative Dynamic Detection Principle (DDP) to measure dust, smoke and particulate concentration present in an exhaust gas flow in a duct, stack or flue. A light beam emitted from the Transceiver (TRX) passes across the duct, stack or flue to a Reflector, which returns the light beam to the TRX. Particles moving through the beam will cause fluctuations in the intensity of light received by the TRX. When calibrated against standard reference measurements, the magnitude of the signal variation relates directly to the dust, smoke and particulate concentration.



Features


In-situ measurement directly in exhaust gas flow
Innovative Dynamic Detection Principle, (DDP), measurement technique
Measurement reading as mg/m3 (when calibrated against
standard reference measurements)
Choice of interface options enabling easy integration into plant control system
Free utility software for PC based setup, control and data logging
Optional Operator Interface with different mounting configurations
IP65 rated external enclosure



View Complete Details

High Pressure Reducer

VRTS is used to reduce the sample pressure from 400 bar to 3 bar



Features




  • Rod-In-Tube Pressure Reducer




  • Designed for High Pressure 400 Bar, Temperature : 650 Degree Celsius




  • Outlet pressure 0 to 30 Bar Adjustable.




  • Built-in Thermal Shut-off Valve




  • Built-in Pressure relief valve




  • Built-in Temp contacts




  • Online grab sample valve




  • Online blow down valve



  • No Filters Required.


  • 6 components in one assembly.


  • Maintenance free with online cleaning arrangement.

View Complete Details

Continuous Particulate Monitor

The Met One Instruments Model BAM-1020 has longstanding U.S. EPA designation as a Federal Equivalent Method (FEM) for continuous PM10 particulate monitoring. In addition, the BAM-1020 is the worlds first instrument to obtain
U.S. EPA FEM designation for continuous PM2.5 monitoring, when configured with the specified settings and accessories. The BAM-1020 has also obtained corresponding certifications in other countries and regions.



Features


U.S. EPA Federal Equivalent Method for PM10 and PM2.5 monitoring
Long term unattended remote operation of up to 60 days
between site visits
Very low operating costs
Automatic hourly span checks
Fast and easy field audits using common FRM audit tools
Bench top or equipment rack mounting in mobile or
stationary shelters
Rugged anodized aluminum, stainless steel, and baked
enamel construction
Highly accurate, reliable, and mechanically simple flow system
Hourly filter advances minimize effects on volatile compounds
Advanced Smart Heater technology precisely controls sample
relative humidity
Integrated datalogger allows the connection of up to six
additional meteorological sensors
Internal memory provides up to 182 days of digital data storage
Data retrieval through RS-232 serial ports using direct PC
connections, modems, printers, or digital data collection systems

View Complete Details

Alkalinity Analyzer

Model 6800 Alkalinity Analyzer utilizes a direct measurement of Alaklinity measurement. Unlike titration method, the 6800 measures the CO2 Concentrations derived from ananlysis of Total Inorganic Carbon (TIC), using interference-free infrared technology. Both methods are compatible, since each uses the same stochiometric relationships. For convenience in relating the technologies, phenolphthalein alkalinity id determined.



Features



  • Alkalinity/Direct Detection Method

  • Avoids Titrimetric/Colorimetric Procedures

  • Reports Total Alkalinity

  • Requires No Probes

  • Integrates with Teledyne TOC Platform

  • Interference Free Analysis

  • Completely Automatic

  • Rapid Response


View Complete Details

Sentinel Analyzers

Teledyne offers two proven standard sensor configurations as functioning receptacles for its Oxidation Reduction Potential (ORP) cartridge. The SP-1 immersion or the SP-2 valve retractable sensors come in a variety of materials to further enhance the resistance of aggressive corrosion aqueous media and can be ordered in varying lengths to meet installation requirements.



Features



  • Teledynes ORP electrode and sensor have a low physical
    profile (3/4 dia) that allows for greater ease of insertion into
    potentially high flow rate/pressure pipelines. Selectable sensor
    housing lengths allow for reaching deep aeration basins or
    vats.

  • The ORP electrode (cartridge) is replaceable (as a component
    of the sensor) at a much lower life cycle cost than that of the
    competition. The sensor has a preamp (signal conditioner)
    integral to the sensor that provides a cleaner signal for
    transmission over longer cable lengths.

  • Attempting to measure ORP with a pH electrode will yield
    an unacceptable offset in mV. An oxidizing agent such as
    quinhydrone (cyclohexadiene) must be added to the buffer
    to develop a measurement standard. Being acidic, the
    quinhydrone must be used @ 7pH or less (4pH). This, then,
    will approximate a correct mV reading of 59.1 per decade.

View Complete Details

Combustion Efficiency Analyzer

Teledyne's Max 5 Combustion Efficiency Analyzer is the quick and easy way to fine tune boilers, furnaces, fireboxes and any commercial or industrial combustion process. With the Max 5's logical design and simple controls, it's easy to obtain money saving combustion efficiency. At the push of a button, this unit calculates efficiency and displays the results of burner adjustments without the need for charts or tables. In addition, the unit is compact and completely portable, making it convenient to spot check in the most difficult locations.



Features


Measures O2, CO, combustibles, temperature;
calculates CO2 and net efficiency
NiCad battery powered with built-in AC charger
15 foot (4.5 meter) sampling hose
Auto calibration of O2 sensor
Auto zero of combustible and CO sensor
RS-232C serial data output
Storage capability for 20 sets of data
Low battery indicator

View Complete Details

Process Analyzers

We offer the worlds largest range of moisture and hydrocarbon dew-point analyzers for the oil, natural gas, refining and power industries. Customers can choose from standard systems or analyzer and sampling packages designed to meet their specific needs. Our process analyzer systems measure trace moisture within hydrocarbon gases and liquids as well as hydrocarbon dew point in natural gas using our patented Dark Spot technology. We can create analyzer systems which measure one or a combination of these and other parameters.



View Complete Details

Portable Hygrometers

This group of portable dew-point meters are designed for fast, accurate and stable measurement of dew point, relative humidity and moisture concentration. They are built to a rugged construction suitable for demanding industrial applications.
All instruments in our range of portable and hand-held hygrometers are traceable to National Standards.

View Complete Details

Precision Hygrometers








Many applications need reliable and precise measurement of trace moisture, moisture content and dew point in gases to operate efficiently and effectively. Our chilled mirror and quartz crystal microbalance precision hygrometers provide peace of mind where the accuracy is essential, in applications ranging from laboratory-based to demanding industrial processes such as metal heat treatment.


Datasheets


































Optidew - High Performance Optical Dew-Point Transmitter



Optidew Vision - Fundamental, Accurate and virtually Drift-Free Dew-Point Measurement



S4000 Remote - Precision Laboratory Dew-Point Hygrometer



S4000 TRS - Precision Dew-point Hygrometers



S8000 Integrale - High Performance Chilled Mirror Dewpointmeter



S8000 Remote - High Precision Chilled Mirror Hygrometer



S8000 RS - High-Precision Chilled Mirror Hygrometer



View Complete Details

Relative Humidity Instruments

Maintaining the right level of humidity is critical in many situations, each of which has its own set of requirements. Our wide range of relative humidity sensors, transmitters and probes allows customers to choose the right fit for their applications.

View Complete Details

Shelters Steam Equipments

Shelters Steam Equipments offers a wide range of shelter types and configurations that can be customised to your exact needs. We have rich experience in the design, construction, installation, commissioning and maintenance of AAQMS for all environments from the hot tropical climate to the freezing cold climate. Steam Equipments have many strong partnerships throughout the world with distributors who have strong technical experience with air monitoring equipment and have been factory trained by Steam Equipments.
View Complete Details

Moisture Calibration Instruments

This group of portable dew-point meters are designed for fast, accurate and stable measurement of dew point, relative humidity and moisture concentration. They are built to a rugged construction suitable for demanding industrial applications.
All instruments in our range of portable and hand-held hygrometers are traceable to National Standards.

View Complete Details

Steam And Water Analysis System

Features



  • Truly designed as per ASME PTC 19.11 recommendations

  • Compact double helix type, shell & tube sample coolers

  • First time All the High Pressure components upto
    Pressure reducer can withstand temp. upto 550deg C. (i.e.
    Valve to Pressure reducer)

  • Automatic High Temp. Shut-off valve are used for high
    temperature protection

  • The Entire system is protected upto 600Deg F upto High
    Temp. Sample Shut-off valve

  • No Power Supply required. No wiring !!!!!

  • Rod-in-Tube type pressure reducer for High pressure
    sample lines as recommended by ASME PTC 19.11

  • On line pressure regulator cleaning

  • No Filters are used

  • Back pressure regulator with Stainless steel diaphragm

  • Easy access of components.

  • Stainless Steel Cooling water pipeline

  • Totally Maintenance free

View Complete Details

Pressure Reducer

Steam Equipments High pressure reducer is designed for high pressure boiler sampling lines above 35 Kg/Cm2 with inlet pressure upto 375 Kg/Cm2 and outlet pressure totally adjustable These type of pressure reducers are recommended by ASME 19.11-1997 steam and water sampling, conditioning & analysis in power cycle.



Features




  • Rod-In-Tube Design




  • NO FILTERS REQUIRED




  • Designed for High Pr. upto 400 Bar




  • Outlet pressure 1 to 30 Kg/cm2 Adj.




  • Design Temperature : 350C




  • Designed in accordance with ASME-PTC 19.11 recommendations




  • ON-LINE Cleaning (In-Situ) by retracting the rodswithout disconnecting the sample line




  • No Spring or diaphragms used




  • No valve plug, or Valves Seat



  • No Filters Required.


  • Maintenance free.


  • ON-LINE Cleaning (In-Situ) by retracting the rods without disconnecting the sample line

View Complete Details

Resin Columns

Features



  • Slim Design for better performance

  • Color indicating type resin

  • Optional quick-disconnecting kit

  • Corrosion resistant

  • Designed for Max Pressure

  • up to 6 Bar

  • Design Temperature : 80 deg. C

  • Easy replacement of resin

View Complete Details

High Pressure Sample Filter

Features




  • Compact T type Design




  • Spring Loaded, Easy cleaning & Maintenance




  • Optional Blowdown facility & Online cleaning arrangement




  • Compact Design




  • Designed Pressure 250 Bar




  • Designed Temperature 550 C




  • 40 Micron Filter element




  • Stainless Steel Constructione



View Complete Details

Stream Selector Unit

This STREAM SELECTOR UNIT is based on a popular 8-bit Microcontroller. The system is designed to control the timing of stream selection of up to eight streams system using its timer and relay outputs. It also generates Sample and Hold analog outputs for each channel.



Features



  • Slim Design for better performance

  • Color indicating type resin

  • Optional quick-disconnecting kit

  • Corrosion resistant

  • Designed for Max Pressure

  • up to 6 Bar

  • Design Temperature : 80 deg. C

  • Easy replacement of resin


View Complete Details

Air Cooled Chiller

  • Voltage 440V
  • Type Fully Automatic
  • Category Cooling & Heating
  • Power Source Electric
  • Dimension(L*W*H) 550mm x 550mm x 600mm
  • COPELAND/Maneurop COMPRESSOR

The most compelling reason for a chiller is the protection it provides to your valuable process equipment applications. A chiller commonly represents a small fraction of the cost of the processing equipment, yet it provides solid protection of your investment, 24 hours a day, 7 days a week for years and years to come.

View Complete Details

Analyser

The treatment of water utilized in a power is critical for reducing boiler failures. As boilers generate steam or water is evaporated by a cooling tower, dissolved minerals accumulate and eventually lead to corrosion of boiler tubes and heat exchanger leaks. To properly control and conserve the chemical additives used to inhibit the costly build-up of deposits, and to determine appropriate boiler blow down schedules, continuous on-line pH and conductivity monitoring of boiler and cooling water is essential.



Features



  • Graphics Display

  • Process Measurements

  • Process Controller

  • Pre-pHault Diagnostic & Hart Communications

  • Smart Transmitters

  • Durable / Cost Savings Approach

View Complete Details

Food Package Analyzer

Model 9070 Food Package Analyzer is an ideal unit for spot checking gas measurements within food containers for ongoing validation of packaging machines.
After inserting the sample probe into a package or container, the 9070 automatically draws a sample and displays the lowest reading of oxygen and the highest reading of carbon dioxide. There is no need to touch a key or button during the analytical process.



Features




  • Two isolated, linearized 4-20 mADC outputs




  • Computer / printer interface for data




  • Self diagnostic alarm




  • LCD display content options




  • One user-programmable alarm relay




  • Accessory kit for various applications



View Complete Details

Ultraviolet Photometric Analyzer








Series 6000 Microprocessor Controlled Ultraviolet Photometer is designed to provide continuous on-line analytical data of critical process conditions and eliminate time consuming laboratory analysis. This analyzer can be configured to measure at any wavelength within the ultraviolet or visible portions of the electromagnetic energy spectrum.
Since numerous gases and liquids have a useful absorbance peak in the ultraviolet region, a wide variety of applications are possible.


Features


Microprocessor based, high resolution, ultra stable elevvctronics (no potentiometers)
Three user-selectable ranges
Signal & Range ID output: 0-1 VDC and 4-20 mADC (isolated)
Programmable auto ranging
Range ID contacts (quantity 4) Form A normally open contacts, 3A@250 VAC resistive
Two adjustable concentration alarm set points with programmable relay function Form C contacts, 3A@250 VAC resistive
Programmable auto calibration with mode ID Form A normally open contacts
Remotely operated calibration (customer supplied valves and 24 VDC signal)
Self diagnostics with Form C failure contacts
Full duplex RS232 communication link
Power: 115/230 VAC 50/60 Hz


View Complete Details

Hosedown Station

The TOT-Hosedown Station has been designed to put the safety of your operators first, thanks to it's innovative technology. The system utilizes a thermal element located in the downstream leg of the mixing valve. The thermal element is designed to throttle steam flow should the temperature set point be exceeded and will completely shut down at 15F above set point or if cold water flow is interrupted. The thermal element will not re-open until cold water flow is restored.



Features



  • Safe operation: auto shut-off of steam if cold water flow is interrupted

  • In-line field serviceable mixing valve:

    • cartridge element can be easily cleaned or replaced in minutes, making the washdown station work like new again



  • Provided with heavy duty globe valves for independent throttling, allowing for cold water only or independent adjustment of water temperature

  • Check valves, stainless steel thermometer, globe valves and stainless steel hose rack, standard with all units

  • Designed to fit in place of standard industrial hose stations

View Complete Details

Shelters

Steam Equipments offers a wide range of shelter types and configurations that can be customised to your exact needs. We have rich experience in the design, construction, installation, commissioning and maintenance of AAQMS for all environments from the hot tropical climate to the freezing cold climate. Steam Equipments have many strong partnerships throughout the world with distributors who have strong technical experience with air monitoring equipment and have been factory trained by Steam Equipments.



Features



  • Small compact stations

  • Large fixed stations

  • 20ft shipping container style stations

  • Cyclone proof compact stations

  • Relocatable caravan stations (moved from site to site)

  • Mobile stations (can drive through traffic measuring pollution in real time)


View Complete Details

Single Sensor Sample Draw Manifold









Detcon Model SD-1-N7 is a single sensor sample draw manifold designed for use with any one of a number of gas detection sensors including combustible gas, hydrogen sulfide, oxygen and a long list of toxic compounds. The sampling system utilizes an internal pump to draw air and gas samples from a remote location and flow the sample across the sensor at a metered flow rate. In use, the sample draw method allows for remote calibration and routine maintenance without exposing maintenance personnel to dangerous or difficult to access sampling areas. Sampling time is a function of the distance between the sample point and the sample draw manifold. Detcon Model SD-1-N7 is housed in a NEMA 7 explosion proof enclosure and is suitable for installation in hazardous locations: Class I; Division 1; Group C & D. The hazardous area rating allows for installation with a minimum distance to the sample point, which decreases delays in real time sampling.


Features


  • Input/output in-line flame propagation barriers




  • Power input and flow fault LED indicators




  • Flow fault fail-safe supervision




  • In-line sample input moisture filter





View Complete Details

Pressure Reducers

High pressure reducer is designed for high pressure boiler sampling lines above 35 kgcm2 with inlet pressure upto 375 kgcm2 and outlet pressure totally adjustable these type of pressure reducers are recommended by asme 19.11-1997 steam and water sampling, conditioning & analysis in power cycle.
View Complete Details

Thermal Conductivity Transmitter

The Model 2000XTC Transmitter resets the standard for thermal conductivity detector based applications within the process control industry. As an intrinsically safe transmitter, packaged within a rugged, weatherproof housing, the 2000XTC is suitable for use in harsh, hazardous outdoor environments. Using a novel, solid-state thermal conductivity sensor, this cost-effective transmitter can be configured to detect H2, He, N2, Ar, CO2 or a number of other gases of interest in binary or multi-component sample gas mixtures.



Features


Customer selectable gas constituents; 11 gases, 110 combinations

Automatic linearization

Auto-ranging with manual override to lock into specific range

Alphanumeric display which prompts and informs operator

Auto and remote initiated calibration capabilities

Bi-directional RS-232 serial digital communication port

Extensive self-diagnostic capabilities

2 x programmable concentration alarm and system failure alarm relays

View Complete Details

Calorimetric Analyzers








The LXT 600 Series Analysers are a family of on-line sequential sampling analysers that use Colorimetric or Ion Selective Electrode (ISE) technologies to perform an analysis. The analysers can be configured to perform most colorimetric or ISE based laboratory analysis that use up to four reagents.


Features

  • Simple
    Easy Installation User Friendly Menu Structure Touch Screen Interface Easy Process Configuration

  • Reliable
    Epoxy Powder Coated Rugged Cold Rolled Steel Cabinet Two Seperate Compartments (Electronics & Hydraulics Loss of Sample & Low Reagent Alarms)

  • Cost Effective
    Low Maintenance Adjustable Cycle Time to Minimize Reagent Uages



View Complete Details

Back Pressure Regulator

Steam Equipment's back pressure regulator is designed for gas or liquid service to control the inlet pressure. It is used to maintain the constant pressure in sampling system or act in a relief valve capacity.

These BPRV are used in Steam & Water Analysis Systems, Instrumentation systems, etc.



Features



  • High Pressure capability upto 10 Kg/Cm2

  • Suitable for corrosive applications

  • Low operating torque

  • Compact design

  • Highly sensitive, Diaphragm Type

  • Stainless steel body material

  • Accurate adjustment

View Complete Details

X-ray Fluorescence Analyzer

The ability to monitor the concentration of an analyte in a process stream is critical for accurate and reliable process control. There are
many techniques used to determine the analyte concentration of interest. One of the most sensitive sensing techniques is molecular fluorescence. Fluorescence occurs when a molecule absorbs light energy, either ultraviolet or visible, and rapidly emits light, at some longer wavelength. Fluorescence of this type is referred to as Stokes fluorescence. Fluorimetry characterizes the excitation and emission properties of the molecular species.

View Complete Details

Optical DO Analyzer

The LXT-220-D08 optical dissolved oxygen sensor uses a fluorescence quenching method to determine the oxygen concentration in water. The use of this Optical Dissolved Oxygen method by the LXT-220-D08 minimizes maintenance, increases reliability and improves the long term accuracy of the measurement. Combine this improved measurement technology with the rugged, easy to install design and the LXT-220-D08 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water.



Features


Optical technology
Minimum maintenance
Long maintenance intervals
Stable measurement
Maximum measurement accuracy

No flow needed
Measurement possible in still water

Intelligent sensor
Self monitoring
Storage of calibration data in sensor

Digital data transmission
Insensitive to electromagnetic interferences

Dual Channel Capability
Lower Cost - 2 DO8 sensors per analyzer

View Complete Details

Total Sulfide Analyzer

The Model 6200E Total Sulfides Analyzer utilizes proven UV fluorescent technology to continuously detect sulfides found in inert gas streams. An internal, quartz catalytic converter is employed to convert the sulfides, when mixed with scrubbed ambient air, into SO2 via high temperature oxidation.
An internal vacuum pump is employed to draw both the sample and the ambient air into the converter. The converted sample gas is fed to the fluorescence chamber where it is then exposed to ultra-violet radiation.



Features


High sensitivity with user selectable ranges from 0-50 ppb to 0-20 ppm
Microprocessor controlled, providing advanced user interface capabilities
Built-in data acquisition capability using the analyzers own RAM
Extremely high-end self diagnostic capability providing continuous self checking with continuous warning alarms
Bi-directional RS-232C for remote operation
Critical orifices provide flow sensitivity
High temperature TRS converter
Digital status outputs provide instrument condition
Easy to read display
Proven UV fluorescence technique

View Complete Details

Trace And Percent Oxygen Transmitter

The INSTA TRANS O2 transmitter. By applying lessons learned from our Series 300T & 300P intrinsically safe oxygen transmitter designs introduced in the late 1980s, and adding those parameters required by todays users, the Insta Trans offers unprecedented:
Flexibility
Ease of use
Quick recovery on ppm O2 applications (when changing out sensors)
Reliability
Cost effectiveness



Advantages


Built-in digital display
Insta Trace oxygen sensor (ppm appls)
Simple intuitive controls
Easy field calibration and range selection
SS or nylon wetted parts
Weather tight NEMA-4 construction
Intrinsically safe operation (optional)
Reverse voltage protection and temp compensation
Digital electronic control circuitry with permanent SPAN setting memory

View Complete Details

Heat Actuated Trap

Since HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems. The unique ram-style plug & seat provide reliable, tight shut off longer than any other design available.



Design Features


* Stainless body, fittings, spring and plug
* Corrosion resistant - Long service life
* Most narrow temperature band available
* Compact, low mass - Fast response
* Ram-type plug for tight reliable shutoff
* Downstream actuator for greater sensitivity
* Sensitive to temperature only
* Unaffected by pressure variations
* Easy installation with pipe wrench
* Discharges the minimum amount of water required to prevent freeze damage

View Complete Details

Tube Valve Heat Actuated Trap

These valves save space, eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug & seat provide reliable, tight shut off longer than any other design available. TV/HAT valves are covered with our standard 36 month warranty & service policy to further reduce maintenance cost. Since TV/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.



















Design Features

* Compact, low mass for fast response
* Corrosion resistant for long service life
* Stainless steel body, fittings, spring and plug
* Ram-type plug for tight, reliable shutoff
* Eliminates live steam losses
* Operates in narrow temperature band
* Downstream actuator for greater sensitivity
* Operating temperatures unaffected by pressure
* Wide choice of set-points





View Complete Details

Diverting Valve

The Therm-Omega-Tech Model M/D temperature control valve is designed for 3-way mixing or diverting applications. For fast response, the valve is compact and low mass. Therm-Omega-Tech's valves are designed around our exclusive Thermoloid sensor/controller that automatically and accurately proportions the flow in response to fluid temperature. The Thermoloid sensor/controller is the most advanced and reliable thermal actuator of its type available today.



Design Features


* Open Temperature: 55F Temperature Set Point
* Temperature Control Valve - All 316 Stainless Steel

View Complete Details

Steam Control Valve

The TV/SC-A can be used to turn on steam, air, gas or liquids compatible with Teflon and stainless steel in response to ambient temperature change. Applications include the automation of steam tracing lines, operation of pneumatically operated pumps for injection of antifreeze liquids, instrument enclosure control, etc. The TV/SC-AR (reverse-acting) can be used to regulate the flow of glycol, water or other cooling media; or can automate cooling sprinklers and cooling baths, etc.



Design Features


* Narrow temperature band
* Compact low mass for fast response
* Ram-type plug for reliable shut-off
* Unaffected by pressure variations
* Quick and easy installation
* Compatible with standard tubing and connections
* Long service life (36 month pro rated warranty)
* Large flow coefficient (Cv)
* Direct acting (no pilot valve)

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rasheed Syed (Steam Equipments Pvt Ltd)
  • PLOT NO – 44, TINY INDUSTRIAL ESTATE KONDHWA BUDRUK, PUNE – 411048, Maharashtra
  • Share us via