Our Products
Vortex Flow Sensor for Water
The VF-2000 flow sensor body and shedder bar (vortex generator) are molded as one component. Sensor body is made of PPS (Polypylene Sulphide) and is designed to eliminate deposits. A combination of straight flow path and shedder bar gives a lower pressure loss compared with other types of Polypylene Sulphide flowmeters.
Features
Simple and Compact Design: The VF-2000 flow sensor body and shedder bar (vortex generator) are molded as one component. This design approach has reduced the cost as well as the size and weight of the flowmeter. Sensor body is made of PPS (Polyphenylene Sulphide) and is designed to eliminate deposits.
No Maintenance Cost: The VF-2000 has no moving parts, no maintenance is needed.
Low Pressure Loss: A combination of straight flow path and shedder bar gives a lower pressure loss compared with other
types of flowmeters
Display Model with Current and Alarm Output: 3-digit LED display for flow rate, current output and alarm outputs (2-point) are provided in compact design.
CE Marking: The VF-2000 meets the EC directive for CE mark.
The Model 9110E uses the proven chemiluminescence detection principle, coupled with state-of-the-art microprocessor technology to provide the sensitivity, stability and ease of use needed for ambient or dilution CEM monitoring requirements. The analyzer uses multi-tasking software which allows complete control of all functions while providing online indication of important operating parameters. Measurements are automatically compensated for temperature and pressure changes. In addition, stability is enhanced by an Auto-Zero circuit that continuously provides a true zero reference. The result is sensitive, accurate, and dependable performance under the harshest operating conditions.
Features
0-50 ppb to 0-20 ppm ranges, user selectableIndependent ranges for NO, NO2, NOXMicroprocessor controlled for versatilityMulti-tasking software allows viewing of test variables while operatingContinuous self checking with alarmsPermeation drier on ozone generatorDual bi-directional RS-232 ports for remote operation (optional RS-485 or Ethernet)Digital status outputs provide instrument conditionAdaptive signal filtering optimizes response timeTemperature and pressure compensationConverter efficiency correction softwareContinuous automatic zero correctionCatalytic ozone scrubberInternal zero and span check (optional)Internal data logging with 1 min to 365 day multiple averages (up to 1 million records)
Model 6400E uses the proven UV fluorescence principle, coupled with state-of-the-art microprocessor technology to provide accurate and dependable measurements of low level S0 2.
Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity.
Features
The DSL-340 Dust Monitor uses the innovative Dynamic Detection Principle (DDP) to measure dust, smoke and particulate concentration present in an exhaust gas flow in a duct, stack or flue. A light beam emitted from the Transceiver (TRX) passes across the duct, stack or flue to a Reflector, which returns the light beam to the TRX. Particles moving through the beam will cause fluctuations in the intensity of light received by the TRX. When calibrated against standard reference measurements, the magnitude of the signal variation relates directly to the dust, smoke and particulate concentration.
Features
In-situ measurement directly in exhaust gas flowInnovative Dynamic Detection Principle, (DDP), measurement techniqueMeasurement reading as mg/m3 (when calibrated againststandard reference measurements)Choice of interface options enabling easy integration into plant control systemFree utility software for PC based setup, control and data loggingOptional Operator Interface with different mounting configurationsIP65 rated external enclosure
VRTS is used to reduce the sample pressure from 400 bar to 3 bar
Features
Rod-In-Tube Pressure Reducer
Designed for High Pressure 400 Bar, Temperature : 650 Degree Celsius
Outlet pressure 0 to 30 Bar Adjustable.
Built-in Thermal Shut-off Valve
Built-in Pressure relief valve
Built-in Temp contacts
Online grab sample valve
Online blow down valve
The Met One Instruments Model BAM-1020 has longstanding U.S. EPA designation as a Federal Equivalent Method (FEM) for continuous PM10 particulate monitoring. In addition, the BAM-1020 is the worlds first instrument to obtain
U.S. EPA FEM designation for continuous PM2.5 monitoring, when configured with the specified settings and accessories. The BAM-1020 has also obtained corresponding certifications in other countries and regions.
Features
U.S. EPA Federal Equivalent Method for PM10 and PM2.5 monitoringLong term unattended remote operation of up to 60 daysbetween site visitsVery low operating costsAutomatic hourly span checksFast and easy field audits using common FRM audit toolsBench top or equipment rack mounting in mobile orstationary sheltersRugged anodized aluminum, stainless steel, and bakedenamel constructionHighly accurate, reliable, and mechanically simple flow systemHourly filter advances minimize effects on volatile compoundsAdvanced Smart Heater technology precisely controls samplerelative humidityIntegrated datalogger allows the connection of up to sixadditional meteorological sensorsInternal memory provides up to 182 days of digital data storageData retrieval through RS-232 serial ports using direct PCconnections, modems, printers, or digital data collection systems
Model 6800 Alkalinity Analyzer utilizes a direct measurement of Alaklinity measurement. Unlike titration method, the 6800 measures the CO2 Concentrations derived from ananlysis of Total Inorganic Carbon (TIC), using interference-free infrared technology. Both methods are compatible, since each uses the same stochiometric relationships. For convenience in relating the technologies, phenolphthalein alkalinity id determined.
Features
Teledyne offers two proven standard sensor configurations as functioning receptacles for its Oxidation Reduction Potential (ORP) cartridge. The SP-1 immersion or the SP-2 valve retractable sensors come in a variety of materials to further enhance the resistance of aggressive corrosion aqueous media and can be ordered in varying lengths to meet installation requirements.
Features
Teledyne's Max 5 Combustion Efficiency Analyzer is the quick and easy way to fine tune boilers, furnaces, fireboxes and any commercial or industrial combustion process. With the Max 5's logical design and simple controls, it's easy to obtain money saving combustion efficiency. At the push of a button, this unit calculates efficiency and displays the results of burner adjustments without the need for charts or tables. In addition, the unit is compact and completely portable, making it convenient to spot check in the most difficult locations.
Features
Measures O2, CO, combustibles, temperature;calculates CO2 and net efficiencyNiCad battery powered with built-in AC charger15 foot (4.5 meter) sampling hoseAuto calibration of O2 sensorAuto zero of combustible and CO sensorRS-232C serial data outputStorage capability for 20 sets of dataLow battery indicator
We offer the worlds largest range of moisture and hydrocarbon dew-point analyzers for the oil, natural gas, refining and power industries. Customers can choose from standard systems or analyzer and sampling packages designed to meet their specific needs. Our process analyzer systems measure trace moisture within hydrocarbon gases and liquids as well as hydrocarbon dew point in natural gas using our patented Dark Spot technology. We can create analyzer systems which measure one or a combination of these and other parameters.
This group of portable dew-point meters are designed for fast, accurate and stable measurement of dew point, relative humidity and moisture concentration. They are built to a rugged construction suitable for demanding industrial applications.
All instruments in our range of portable and hand-held hygrometers are traceable to National Standards.
Many applications need reliable and precise measurement of trace moisture, moisture content and dew point in gases to operate efficiently and effectively. Our chilled mirror and quartz crystal microbalance precision hygrometers provide peace of mind where the accuracy is essential, in applications ranging from laboratory-based to demanding industrial processes such as metal heat treatment. Datasheets
|
Maintaining the right level of humidity is critical in many situations, each of which has its own set of requirements. Our wide range of relative humidity sensors, transmitters and probes allows customers to choose the right fit for their applications.
This group of portable dew-point meters are designed for fast, accurate and stable measurement of dew point, relative humidity and moisture concentration. They are built to a rugged construction suitable for demanding industrial applications.
All instruments in our range of portable and hand-held hygrometers are traceable to National Standards.
Features
Steam Equipments High pressure reducer is designed for high pressure boiler sampling lines above 35 Kg/Cm2 with inlet pressure upto 375 Kg/Cm2 and outlet pressure totally adjustable These type of pressure reducers are recommended by ASME 19.11-1997 steam and water sampling, conditioning & analysis in power cycle.
Features
Rod-In-Tube Design
NO FILTERS REQUIRED
Designed for High Pr. upto 400 Bar
Outlet pressure 1 to 30 Kg/cm2 Adj.
Design Temperature : 350C
Designed in accordance with ASME-PTC 19.11 recommendations
ON-LINE Cleaning (In-Situ) by retracting the rodswithout disconnecting the sample line
No Spring or diaphragms used
No valve plug, or Valves Seat
Features
Features
Compact T type Design
Spring Loaded, Easy cleaning & Maintenance
Optional Blowdown facility & Online cleaning arrangement
Compact Design
Designed Pressure 250 Bar
Designed Temperature 550 C
40 Micron Filter element
Stainless Steel Constructione
This STREAM SELECTOR UNIT is based on a popular 8-bit Microcontroller. The system is designed to control the timing of stream selection of up to eight streams system using its timer and relay outputs. It also generates Sample and Hold analog outputs for each channel.
Features
The most compelling reason for a chiller is the protection it provides to your valuable process equipment applications. A chiller commonly represents a small fraction of the cost of the processing equipment, yet it provides solid protection of your investment, 24 hours a day, 7 days a week for years and years to come.
The treatment of water utilized in a power is critical for reducing boiler failures. As boilers generate steam or water is evaporated by a cooling tower, dissolved minerals accumulate and eventually lead to corrosion of boiler tubes and heat exchanger leaks. To properly control and conserve the chemical additives used to inhibit the costly build-up of deposits, and to determine appropriate boiler blow down schedules, continuous on-line pH and conductivity monitoring of boiler and cooling water is essential.
Features
Model 9070 Food Package Analyzer is an ideal unit for spot checking gas measurements within food containers for ongoing validation of packaging machines.
After inserting the sample probe into a package or container, the 9070 automatically draws a sample and displays the lowest reading of oxygen and the highest reading of carbon dioxide. There is no need to touch a key or button during the analytical process.
Features
Two isolated, linearized 4-20 mADC outputs
Computer / printer interface for data
Self diagnostic alarm
LCD display content options
One user-programmable alarm relay
Accessory kit for various applications
Series 6000 Microprocessor Controlled Ultraviolet Photometer is designed to provide continuous on-line analytical data of critical process conditions and eliminate time consuming laboratory analysis. This analyzer can be configured to measure at any wavelength within the ultraviolet or visible portions of the electromagnetic energy spectrum.Since numerous gases and liquids have a useful absorbance peak in the ultraviolet region, a wide variety of applications are possible. Features Microprocessor based, high resolution, ultra stable elevvctronics (no potentiometers)Three user-selectable rangesSignal & Range ID output: 0-1 VDC and 4-20 mADC (isolated)Programmable auto rangingRange ID contacts (quantity 4) Form A normally open contacts, 3A@250 VAC resistiveTwo adjustable concentration alarm set points with programmable relay function Form C contacts, 3A@250 VAC resistiveProgrammable auto calibration with mode ID Form A normally open contactsRemotely operated calibration (customer supplied valves and 24 VDC signal)Self diagnostics with Form C failure contactsFull duplex RS232 communication linkPower: 115/230 VAC 50/60 Hz |
The TOT-Hosedown Station has been designed to put the safety of your operators first, thanks to it's innovative technology. The system utilizes a thermal element located in the downstream leg of the mixing valve. The thermal element is designed to throttle steam flow should the temperature set point be exceeded and will completely shut down at 15F above set point or if cold water flow is interrupted. The thermal element will not re-open until cold water flow is restored.
Features
Steam Equipments offers a wide range of shelter types and configurations that can be customised to your exact needs. We have rich experience in the design, construction, installation, commissioning and maintenance of AAQMS for all environments from the hot tropical climate to the freezing cold climate. Steam Equipments have many strong partnerships throughout the world with distributors who have strong technical experience with air monitoring equipment and have been factory trained by Steam Equipments.
Features
Detcon Model SD-1-N7 is a single sensor sample draw manifold designed for use with any one of a number of gas detection sensors including combustible gas, hydrogen sulfide, oxygen and a long list of toxic compounds. The sampling system utilizes an internal pump to draw air and gas samples from a remote location and flow the sample across the sensor at a metered flow rate. In use, the sample draw method allows for remote calibration and routine maintenance without exposing maintenance personnel to dangerous or difficult to access sampling areas. Sampling time is a function of the distance between the sample point and the sample draw manifold. Detcon Model SD-1-N7 is housed in a NEMA 7 explosion proof enclosure and is suitable for installation in hazardous locations: Class I; Division 1; Group C & D. The hazardous area rating allows for installation with a minimum distance to the sample point, which decreases delays in real time sampling. Features
|
The Model 2000XTC Transmitter resets the standard for thermal conductivity detector based applications within the process control industry. As an intrinsically safe transmitter, packaged within a rugged, weatherproof housing, the 2000XTC is suitable for use in harsh, hazardous outdoor environments. Using a novel, solid-state thermal conductivity sensor, this cost-effective transmitter can be configured to detect H2, He, N2, Ar, CO2 or a number of other gases of interest in binary or multi-component sample gas mixtures.
Features
Customer selectable gas constituents; 11 gases, 110 combinations
Automatic linearization
Auto-ranging with manual override to lock into specific range
Alphanumeric display which prompts and informs operator
Auto and remote initiated calibration capabilities
Bi-directional RS-232 serial digital communication port
Extensive self-diagnostic capabilities
2 x programmable concentration alarm and system failure alarm relays
The LXT 600 Series Analysers are a family of on-line sequential sampling analysers that use Colorimetric or Ion Selective Electrode (ISE) technologies to perform an analysis. The analysers can be configured to perform most colorimetric or ISE based laboratory analysis that use up to four reagents. Features
|
Steam Equipment's back pressure regulator is designed for gas or liquid service to control the inlet pressure. It is used to maintain the constant pressure in sampling system or act in a relief valve capacity.
These BPRV are used in Steam & Water Analysis Systems, Instrumentation systems, etc.
Features
The ability to monitor the concentration of an analyte in a process stream is critical for accurate and reliable process control. There are
many techniques used to determine the analyte concentration of interest. One of the most sensitive sensing techniques is molecular fluorescence. Fluorescence occurs when a molecule absorbs light energy, either ultraviolet or visible, and rapidly emits light, at some longer wavelength. Fluorescence of this type is referred to as Stokes fluorescence. Fluorimetry characterizes the excitation and emission properties of the molecular species.
The LXT-220-D08 optical dissolved oxygen sensor uses a fluorescence quenching method to determine the oxygen concentration in water. The use of this Optical Dissolved Oxygen method by the LXT-220-D08 minimizes maintenance, increases reliability and improves the long term accuracy of the measurement. Combine this improved measurement technology with the rugged, easy to install design and the LXT-220-D08 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water.
Features
Optical technologyMinimum maintenanceLong maintenance intervalsStable measurementMaximum measurement accuracy
No flow neededMeasurement possible in still water
Intelligent sensorSelf monitoringStorage of calibration data in sensor
Digital data transmissionInsensitive to electromagnetic interferences
Dual Channel CapabilityLower Cost - 2 DO8 sensors per analyzer
The Model 6200E Total Sulfides Analyzer utilizes proven UV fluorescent technology to continuously detect sulfides found in inert gas streams. An internal, quartz catalytic converter is employed to convert the sulfides, when mixed with scrubbed ambient air, into SO2 via high temperature oxidation.
An internal vacuum pump is employed to draw both the sample and the ambient air into the converter. The converted sample gas is fed to the fluorescence chamber where it is then exposed to ultra-violet radiation.
Features
High sensitivity with user selectable ranges from 0-50 ppb to 0-20 ppmMicroprocessor controlled, providing advanced user interface capabilitiesBuilt-in data acquisition capability using the analyzers own RAMExtremely high-end self diagnostic capability providing continuous self checking with continuous warning alarmsBi-directional RS-232C for remote operationCritical orifices provide flow sensitivityHigh temperature TRS converterDigital status outputs provide instrument conditionEasy to read displayProven UV fluorescence technique
The INSTA TRANS O2 transmitter. By applying lessons learned from our Series 300T & 300P intrinsically safe oxygen transmitter designs introduced in the late 1980s, and adding those parameters required by todays users, the Insta Trans offers unprecedented:
Flexibility
Ease of use
Quick recovery on ppm O2 applications (when changing out sensors)
Reliability
Cost effectiveness
Advantages
Built-in digital displayInsta Trace oxygen sensor (ppm appls)Simple intuitive controlsEasy field calibration and range selectionSS or nylon wetted partsWeather tight NEMA-4 constructionIntrinsically safe operation (optional)Reverse voltage protection and temp compensationDigital electronic control circuitry with permanent SPAN setting memory
Since HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems. The unique ram-style plug & seat provide reliable, tight shut off longer than any other design available.
Design Features
* Stainless body, fittings, spring and plug* Corrosion resistant - Long service life* Most narrow temperature band available* Compact, low mass - Fast response* Ram-type plug for tight reliable shutoff* Downstream actuator for greater sensitivity* Sensitive to temperature only* Unaffected by pressure variations* Easy installation with pipe wrench* Discharges the minimum amount of water required to prevent freeze damage
These valves save space, eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug & seat provide reliable, tight shut off longer than any other design available. TV/HAT valves are covered with our standard 36 month warranty & service policy to further reduce maintenance cost. Since TV/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.
|
The Therm-Omega-Tech Model M/D temperature control valve is designed for 3-way mixing or diverting applications. For fast response, the valve is compact and low mass. Therm-Omega-Tech's valves are designed around our exclusive Thermoloid sensor/controller that automatically and accurately proportions the flow in response to fluid temperature. The Thermoloid sensor/controller is the most advanced and reliable thermal actuator of its type available today.
Design Features
* Open Temperature: 55F Temperature Set Point* Temperature Control Valve - All 316 Stainless Steel
The TV/SC-A can be used to turn on steam, air, gas or liquids compatible with Teflon and stainless steel in response to ambient temperature change. Applications include the automation of steam tracing lines, operation of pneumatically operated pumps for injection of antifreeze liquids, instrument enclosure control, etc. The TV/SC-AR (reverse-acting) can be used to regulate the flow of glycol, water or other cooling media; or can automate cooling sprinklers and cooling baths, etc.
Design Features
* Narrow temperature band* Compact low mass for fast response* Ram-type plug for reliable shut-off* Unaffected by pressure variations* Quick and easy installation* Compatible with standard tubing and connections* Long service life (36 month pro rated warranty)* Large flow coefficient (Cv)* Direct acting (no pilot valve)