A fully Mig welded, multi-corner single/two joint construction makes the body from total 7mm of tested quality M.S. plate. All 5 sides and the door of the safe are armored with a specially formulated barrier material which is encased between strong outer and inner steel body to withstand the attacks of sledgehammers, power drill and chisel, impact of a fall from upper floors. The overall body thickness on all 5 sides is 100 mm (approx.) including barrier materials which offers fire as well as burglar resistance as per IS: 550 (2005).
DOOR The most attacked portion of a safe, the safe door is made of tested quality M.S. plate and tough steel plate reinforced with oxy-acetylene, drill resistant alloy plate and specially formulated barrier material. Overall thickness of the door is 150 mm.
BOLT WORK MECHANISM The door is provided with solid flanged of 5 mm steel plates on four sides, forming a lock case. Depending on the size of safe have varying number of 32 mm dia. shooting bolts as per IS: 550 (2005). Strong movable shooting bolts are evenly spaced to secure the door on the two sides to make it impossible to dislodge the door by cutting through the hinge. Any pressure exerted on the lock bolt on one side automatically brings into play equal balancing pressure on the opposite side to neutralize and defeat the attempts to dislodge the lock. A two-step lock case construction offers better resistant again the fire and burglar attacks.
AUTOMATIC RE-LOCKING DEVICE A standard feature on all models of safe, this sensitive device is triggered-of when an attack is attempted on the lock through the keyhole with any instrument. This automatic re-locking device guards all the key locks.
LOCKING MECHANISM The locking mechanism is operated by a handle in the front and controlled by superior quality, dual control, and high precision 10 levers locks. These locks are unpickable and only the original keys will open them.
CHOICE OF LOCKING ARRANGEMENT Additional dual control lock can be fitted on various models. Keyless numerical 3 or 4-wheel combination lock, offers a choice of nearly million combinations for setting and resetting. The dial of the lock can be made inoperative by locking it for extra security. Time lock can be fitted; imported superior quality electronic / mechanical UL listed lock with multiple clock movements.
FINISH All steel components are thoroughly cleaned from rust, mill scale, dust, dirt etc. and treated for anti-rusting, followed immediately by coats of high quality zinc chromate primer. Then the safe is given successive under coats and finally a finish coat.
Steel Safe Industries
Bolbala Marg, Ahir Chowk, Atika Industrial Area, - , Rajkot, Gujarat - 360002, IndiaView Mobile No.