MATERIAL

The lockers are manufactured as per IS: 5244. The two sides, back and top of the locker cabinet are fabricated from tested quality 5 mm thick M.S. plate. The partitions and the shelves are of 2 mm HR prime quality M.S. sheet. The door plate of each locker is 10 mm M.S. plate. The hinge arrangement, such that it provides sufficient resistant against tempering attack of common hand tools. The shelves of the locker are reinforced at the front with the 50 X 10 mm bright solid flats.

Each locker is fitted with high quality first class unpickable dual control 7 leave key lock. These locks are self locking so that the custodian does not have to re-lock the locker with his key after the customer has locked it. The mechanism of the lock is such that the customer shall not be able to withdraw his key unless the locker has been re-locked fully. Once the customer has locked the locker, the same cannot be opened unless the custodian turns in his key to take off his control. We can also provide personal lock known as ‘renter lock’ from inside for total protection and customer retains the key. Over all pad locking system can also be provided so that customer can use his own padlock for more confidence.

The size and dimension of locker is made as per IS: 5244. In addition to it, we also manufactur safe deposit lockers as per the customer’s choice and specifications for the best and economical use of available space.

All steel components are given a through anti-corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components, free from grease and rust, are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterwards, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the locker cabinet is given coats of high quality paints. Doors and hinges are decorated by powder coated 0.71 mm thick aluminum cover.

MATERIAL

The lockers are manufactured as per IS: 5244. The two sides, back and top of the locker cabinet are fabricated from tested quality 5 mm thick M.S. plate. The partitions and the shelves are of 2 mm HR prime quality M.S. sheet. The door plate of each locker is 10 mm M.S. plate. The hinge arrangement, such that it provides sufficient resistant against tempering attack of common hand tools. The shelves of the locker are reinforced at the front with the 50 X 10 mm bright solid flats.

Each locker is fitted with high quality first class unpickable dual control 7 leave key lock. These locks are self locking so that the custodian does not have to re-lock the locker with his key after the customer has locked it. The mechanism of the lock is such that the customer shall not be able to withdraw his key unless the locker has been re-locked fully. Once the customer has locked the locker, the same cannot be opened unless the custodian turns in his key to take off his control. We can also provide personal lock known as ‘renter lock’ from inside for total protection and customer retains the key. Over all pad locking system can also be provided so that customer can use his own padlock for more confidence.

The size and dimension of locker is made as per IS: 5244. In addition to it, we also manufactur safe deposit lockers as per the customer’s choice and specifications for the best and economical use of available space.

All steel components are given a through anti-corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components, free from grease and rust, are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterwards, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the locker cabinet is given coats of high quality paints. Doors and hinges are decorated by powder coated 0.71 mm thick aluminum cover.