We are offering annealed steel strips. This is an high carbon cold rolled steel strip, with spherodized grain structure, this steel is with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering.

We offer Hardened and tempered strips C62, C-75, C98, EN47 grades. This grade of steel strips are not commonly used in India, so it is not in our inventory but we do supply against an specific request from customer Minimum order quantity and lead time for delivery depends on size

This is a Medium Carbon cold rolled steel strip l with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-300Hv ( band range is +-40 Hv )This grade of steel strip is used where fatigue values and elastic limits are not critical, is used for applications in which high strength, hardness and wear resistance are important. This grade of steel strips has good forming , blanking and bending properties.

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

Usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-350 Hv (band range is+- 40 Hv) These grade of steel is used where fatigue value and elastic limits are critical it is also used where high strength, hardness and wear resistant is needed. These steel has good forming and blanking properties but very poor drawing property.

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

• ApplicationOil & Gas Industry, Automobile Industry, Steel Industry
• Thickness0.25 -4.0 (mm)
• Width250 - 350 (mm)
• Mn0.50 - 0.90 (%)
• S&P (Max)0.04 (%)
• C0.5 - 0.6 (%)

• range200-300Hv

This is a Medium Carbon cold rolled steel strip l with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-300Hv ( band range is +-40 Hv ) This grade of steel strip is used where fatigue values and elastic limits are not critical, is used for applications in which high strength, hardness and wear resistance are important. This grade of steel strips has good forming , blanking and bending properties.

We are offering cold rolled annealed strips. This is an medium carbon cold rolled steel strip l with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. Usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-300hv ( band range is +-40 hv )

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

• MOQ 500 Kilogram
• Thickness0.20 MM TO 4.50 MM
• CertificationIN HOUSE ACCURATE TEST CERTIFICATE
• GradeC80