Steelstrong International Thane, Maharashtra

globe valves are extensively used through-out the refineries, hydrocarbon, energy and process & the power industries. size: 2” up to 24“ (dn 50 up to dn 600) pressure rating: asme 150# to 2500# materials: carbon steels, low temperature carbon steel, martensitic steels, austenitic stainless steel, duplex stainless steels, super duplex stainless steels, nickel alloys, nickel aluminum bronze, hastelloy, inconel, titanium alloy & carbon steel with internal corrosion resistant alloy (cra) overlay design standard: bs 1873, api 623 pressure / temperature rating: asme b 16.34 test (inspection) standard: api 598, iso 5208, bs 6364 construction details: bolted bonnet / pressure seal bonnet, os & y type rising stem end connection: flanged, butt-weld operator / actuator: handwheel gear, actuator (pneumatic, hydraulic, electro-hydraulic and electric motorised) cryogenic service: globe valves can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the customer, down to cryogenic -196°c. If required by the customer, specific cryogenic tests are performed to verify the behaviour of production valves in terms of valve torque, sealing capability, emissions vs the ambient.

STEELSTRONG VALVES has extensive experience in manufacturing, Swing, Tilting Disc and Non-Slam Check Valves for use in the Refineries, Hydrocarbon, Energy and process industries. Size: 2 up to 56“ (DN 50 up to DN 1400) Pressure Rating: ASME 150# to 2500# Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconnel, Titanium Alloy & Carbon Steel with Internal Corrosion Resistant Alloy (CRA) Overlay Design Standard: API 6D, API 594, BS 1868 Pressure / Temperature Rating: ASME B 16.34 Test (Inspection) Standard: API 598, API 6D Construction Details: Bolted Cover / Pressure Seal Bonnet, Swing Check, Tilting Disc, Non – Slam Check End Connection: Flanged, Butt-Weld Cryogenic Service: Almost all STEELSTRONG Check Valve can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the Customer, down to Cryogenic -196°C. If required by the customer, specific Cryogenic Tests are performed to verify the behaviour of valves sealing capability, emissions vs the ambient.

Design & Manufacturing : API602/ISO 15761 for Class 150 & 1500, ASME B 16.34 for Class 2500 Inspection and Testing: API 598, BSEN 12266 Part - 1 & 2 End Dimension : ASME B 16.11 for Socket Weld & ASME B 1.20.1 for Screwed End BW End Dimension : ASME B 16.25 Face to Face & End to End Dimension : Manufacturer Standard GBV Obturator : Parabolic, Regulating, Soft seated GTV Obturator : Solid wedge LCV Obturator:Plug, Ball Features Limit Switch Arrangement Electrical and Pneumatic Arrangement Lantern ring arrangement for vacuum service Position Indicator Locking arrangement Extended Stem Cryogenic Service   Tolarance Face to Face : ± 4 mm

steelstrong valves has extensive experience in manufacturing trunnion mounted, side & top entry ball valves, both soft and metal seated. size: 2” up to 56“ (dn 50 up to dn 1400) pressure rating: asme 150# to 2500# materials: carbon steels, low temperature carbon steel, martensitic steels, austenitic stainless steel, duplex stainless steels, super duplex stainless steels, alloys, nickel aluminum bronze, hastelloy, inconel, titanium alloy & carbon steel with internal corrosion resistant alloy (cra) overlay design standard: api 6d, api 608 pressure / temperature rating: asme b 16.34 test (inspection) standard: api 6d, iso 5208 api 6fa, iso 10497, api607, bs 6364 construction details: single / two / three piece design / side entry end connection: flanged, butt-weld operator / actuator: lever, gear, actuator (pneumatic, hydraulic, electro-hydraulic and electric motorised) special design feature also available: cryogenic design subsea design stem extension single & double piston seat design primary metal and secondary soft seat design emergency seat and stem sealant injection .

gate valves are used extensively throughout the refineries, hydrocarbon, energy and process industries. size: 2” up to 88“ (dn 50 up to dn 2200) pressure rating: asme 150# to 2500# materials: carbon steels, low temperature carbon steel, martensitic steels, austenitic stainless steel, duplex stainless steels, super duplex stainless steels, nickel alloys, nickel aluminum bronze, hastelloy, inconel, titanium alloy & carbon steel with internal corrosion resistant alloy (cra) overlay design standard: api 600, bs 1414, api 6d pressure / temperature rating: asme b 16.34 test (inspection) standard: api 598, api 6d, iso 5208, api6fa, iso 10497, bs6364 construction details: bolted bonnet / pressure seal bonnet, os & y type rising stem end connection: flanged, butt-weld operator / actuator: handwheel, gear, actuator (pneumatic, hydraulic, electro-hydraulic and electric motorised) cryogenic service: gate valves can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the customer, down to cryogenic -196°c. If required by the customer, specific cryogenic tests are performed to verify the behaviour of production valves in terms of valve torque, sealing capability, emissions vs the ambient

Inspection and Testing: API 598, BSEN 12266 Part - 1 & 2, End Dimension : ASME B 16.11 for Socket Weld & ASME B 1.20.1 for Screwed End, Face to Face & End to End Dimension : Manufacturer Standard, GTV Obturator : Solid wedge.