Features

• High-precision feeding: Aiming at the arrival of hi-tech industry, it is controlled by computer closed-circuit feedback system, so that the precision can maintain within 0.03mm.


• Phase-style feeding function: it can input 05 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products (option).


• Manual model: it can input 3 phases manual speed, which can let used operate more easily and feed materials more accurately. High - efficiency release device: it can set up release angle quickly, by cam signal.


• Feeding length setting : input feed length on the controller panel directly.'


• Feeding unit : The roll adopts middle-hollow style, being light low inertia. The surface hardness is HRC 60 and hard chrome plated.

Features

• Accurate and easy pitch adjustment.


• Accuracy to the tume of 25microns, obtainable with piloting.


• The Grippers are made out of carbide ot give life ling service.


• All rotating parts are fitted with antifriction bearings to give long life and reduced maintenance.


• High speed of upto 650 strokes per minute.


• Roller Cam for Pilot release setting, which gives great precision in adjustment of the fixed gripper.


• Micrometer pitch setting arrangement provided.


• Silent in operation - no air required.


• Trouble free in operation.


• Mechanically synchronized with the press thus avoiding feeding mismatch at high speeds.


• Drive from press crankshaft to the Feeder is fitted with an overload safety coupling.


• Hardened gears provided in the right angle gear box for long life.


• Stock buckling guides for thin material.


• Easy setting for strip thickness.

Accessories

Standard transmission including one 900 gear box, one connecting shaft (length must be adopted to the press dimensions) and one rubber coupling. (SUKU/11).

Transmission for speed over than 400 strokes/min including one 900 gear box and its support, one connecting shaft (length must be adopted to the press Dimensions), one flexible coupling and one angle setting coupling. Cascade roll basket to hold the strip on the entry side. Mounting bracket to be fixed to the press.

Here are some very basic reasons with which it can be proved that buying a SUKU Pneumatic Feeder is the right thinking to do. Instaling a feeder on your press does not just mean choosing a pneumatic clamp for feeding the material. You need to choose carefully the right feeder to develop better productivity.

Precision Accuracy to the tune of 20 microns or even better, depending on the type of tooling.

Right to Choose Right Feeder for every needs. Light series for thin materials at fast speed, Medium & heavy series for thicker material; Alfa, Beta, Gamma & Theta with double & triple pulling cylinder and many series to follow soon.

Compact, Rigid and Strong Strictures which has negligible wear characteristics.

Interchangeability from one die to the other because of it simple installation with only two mounting screws.

Durable in Indian working conditions because of Extremely hard Aluminum alloy feed body there is no oxidation due to wet air remaining inside the feeder.

Quiet during operation.

Low air Consumption makes it more economical because it saves electricity.

Last but not the least, it is inexpensive compared with any other option.

Standard Accessory

• Electric Eye Loop Control System.


• Straightener Opener Device.


• Feeding line easily adjusts by advance worm gear screw jacks device.


• Feed and straightener rolls with a hard chrome finished.


• Hold down arm device.

we are a renowned manufacturer, exporter & supplier ofhigh speed gear change feeders. These products have cam mechanism, high precision feeding, speed up to 40m/min & one year quality guarantee. Cam option is 3, 4, 8, 12 division, feeding length is chosen according to the cam division and gear ration and they are suitable for numerous productions. Our feeders can be availed by customers at reasonable prices.

• apply cam mechanism


• high speed and high precision feeding, speed up to 40m/min.


• reliable and stable feeding


• one year quality guarantee

Mode Item TNCF1-300 TNCF1-400 TNCF1-500 TNCF1-600 TNCF2-300 TNCF2-400 TNCF2-500 TNCF2-600
Width of Material 55300 55400 55500 55600 75300 75400 75500 75600
Feed Length (max.) mm 9999.99 9999.99 9999.99 9999.99 9999.99 9999.99 9999.99 9999.99
Thickness of Material (mm) 0.15-1.5 0.3-2.3
Max coll Weight (kg) 1000 2000 300 2000 3000
Coil I.D (mm) 508 508
Max. Coil O.D (mm) 1200 1200
Max. Speed (mmin) 16 16
Feed pitch Accuracy (mm) 0.15 0.15
Feed Roll Upper1Lower1 Upper1Lower1
Work Roll Upper8Lower9 Upper10Lower9 Upper6Lower5
Power Supply 220VAC60HZ 220VAC60HZ
Air Power Supply 5kgcm 5kgcm
Uncoiler Expansion Material Operated Hydraulic Hydraulic
Servo Motor (kw) AC 0.75 AC 1.5 AC 2.2 AC 3.5
Uncoiler Motor (kw) 1.5 2.2 1.5 2.2

We offer zig zag nc servo roll feeder.
model nczaf-200, nczrf-400 nczaf-400, nczrf-800 nczaf-500, nczrf-1000 nczaf-600, nczrf-1200 nczaf-800, nczrf-1600 nczaf-1000, nczrf-2000 nczaf-1300, nczrf-2600 nczaf-1500, nczrf-3000
material width (mm)(max) 200 400 500 600 800 1000 1300 1500
material thickness (mm)(max) - nczaf 1.5200 3.2100 1.5400 3.2200 1.5500 3.2250 1.5600 3.2300 1.5800 3.2400 1.51000 3.2500 1.51300 3.2650 1.51500 3.2750
material thickness (mm)(max) - nczrf 2.0200 3.2100 2.0400 3.2200 2.0500 3.2300 2.0600 3.2400 2.0800 3.2500 2.01000 3.2600 2.01300 3.2800 2.01500 3.2900
offset width (mm)(max) - nczaf 200 400 500 600 800 1000 1300 1500
feed length (mm)(max) - nczrf 200 400 500 600 800 800 800 800
feed length (mm)(max) 9999.99
feed speed (mm)(max) - nczaf 15
feed speed (mm)(max) - nczrf 30
power supply 415v 3phase
release equipment pneumatic

We are engaged in manufacturing and supplying of air feeder.

We are offering all types of Pneumatic Feeder that are available from us at very nominal prices.