Pune, Maharashtra, India
Our Products
| Demagnetizer Required to Eliminate Residual Magnetism of Work Piece, Which is AutomaticallyGenerated Due to Manufacturing Process Like Turning, Milling Grinding Operations. Demagnetizer is Available in Suitable Sizes And Shapes |
| |||||||||||||||
| Magnetic Sheet Puller A Magnetic Sheet Puller is Used to Pull Sheet From Stack. This Device is Basically A Material Handling Devive. It Can be Manufactured According to Need of Application |
| Magnetic Sheet Puller | |
| Size (In mm) L x W x H | |
| 120 x 120 x 25 Overall Height 250 mm | |
| 220 x 120 x 25 Overall Height 250 mm |
| Permanent Magnetic Rectangular And Circular ChucksPermanent Magnetic Chucks Are Designed To Hold The Work Piece on Surface Grinding Machine. These Chuck Are Manufactured For Normal as well as For Heavy-Duty Operations. Chucks Are Designed And Manufactured According To Job. It Consists of Powerful NdFeB Magnets Hence It Generates More Power So That Highter Stock Removal Is Possible. |
| Heavy Duty Permanent Magnetic REctangular Chucks | |
| Size (In mm) L x W x H | Magnetic Pole Gap |
| 16 | |
| 16 | |
| 16 | |
| 19 | |
| 19 | |
| 19 | |
| 19 | |
| 19 | |
| 19 | |
| 19 | |
Handle to operateClamping arm to reach the work pieceLinkages for multiplying the applied forceSpindle for pressure adjustmentBase for mounting at the workplace
The handle is operated which thereby moves the clamping arm to hold the work piece. A required clamping force is achieved and exerted on the work piece. Under this action the Toggle Clamp Holds the work piece firmly and positively.
| Select the spring carefully at the design stage.For longer stroke - select light load or medium load spring.For more load - select heavy load or extra heavy load springs.Calculate spring stroke (required compression.)Pre-loading compression should be equal to 5 % of the length.Use guide pin, a locating bore as a guide - this is essential for spring having a free length / diameter ratio exceeding 3.5If possible use longer springs for lower loadings.Never compress springs beyond the average life load and compression.Always check spring holder heights and working strokes of moving elements after die tools has been reground.Protects springs from corrosive agents.Do not exceed a working temperature of 2500 C, No significant load reduction occurs up to 1200 C, beyond this temperature an average loss of 1 % for every 400 C must be calculate.Do not replace one spring at a time, if they are multiple in use.Do not alter physical characteristics of springs like cutting of coils, grinding of internal or external diameter. |
| |||||||||||||||||||||
