Mumbai, Maharashtra, India
Our Products
As a Hot Rolled Steel Exporter and Supplier from Mumbai, we bring forth imported products from reputed companies in China. We supply Hot Work Steels that are used in hot forming of metals at high temperatures. Hot Rolled Steel that we offer possesses good strength at elevated temperatures and also resistance to fluctuating thermic loads occurring where the tool surfaces come into contact with materials to be processed. This, in addition to the attractive pricing of the Hot Rolled Steel, makes it demanded all over India and overseas. Suited For
| Grade | % | C | Mn | Si | Cr | Mo | V | S | P |
| AISI H11 | Min | 0.30 | 0.20 | 0.80 | 4.75 | 1.25 | 0.30 | Max | Max |
| Max | 0.40 | 0.50 | 1.20 | 5.50 | 1.75 | 0.50 | 0.015 | 0.020 | |
| AISI H13 | Min | 0.30 | 0.20 | 0.80 | 4.75 | 1.25 | 0.80 | Max | Max |
| Max | 0.40 | 0.50 | 1.20 | 5.50 | 1.75 | 1.20 | 0.015 | 0.020 |
We are pionners in making available Chrome Molybdenum steel (often referred to in the industry as Chrome Moly). The molybdenum provides increased strength and higher working temperatures whilst the chromium facilitates excellent corrosion resistance and oxidation. With such high temperature, tensile strength and anti-corrosive properties, our Chrome Moly Steel is highly effective in salt water applications and widely demanded. We offer Chrome Moly Steel that is used for a wide variety of applications particularly in the oil and gas industry, the nuclear industry and fossil fuel power stations.
Used To Make
| Grade | % | C | Mn | Si | Ni | Cr | Mo | S | P |
| En-24 | Min | 0.35 | 0.45 | 0.1 | 1.3 | 0.9 | 0.2 | Max | Max |
| Max | 0.45 | 0.7 | 0.35 | 1.8 | 1.4 | 0.35 | 0.015 | 0.02 | |
| En-19 | Min | 0.35 | 0.5 | 0.1 | 0.9 | 0.2 | Max | Max | |
| Max | 0.45 | 0.8 | 0.35 | 1.2 | 0.35 | 0.015 | 0.02 | ||
| SAE 4340 | Min | 0.38 | 0.6 | 0.15 | 1.65 | 0.70 | 0.20 | Max | Max |
| Max | 0.43 | 0.8 | 0.3 | 2.00 | 0.90 | 0.30 | 0.015 | 0.02 | |
| SAE 4140 | Min | 0.38 | 0.75 | 0.15 | 0.80 | 0.15 | Max | Max | |
| Max | 0.43 | 1 | 0.3 | 1.10 | 0.25 | 0.015 | 0.02 |
Case Hardened Steel is usually formed by diffusing carbon and/or nitrogen into the outer layer of the steel at high temperature. The carbon combines with the steel to make it nearly glass-like in its hardness. The core of the Case Hardened Steel metal stays soft. This gives you a piece of metal that you cannot cut with a saw, but which also does not shatter. Case Hardened Steel is offered by us in various forms and is assured to be of superior quality. Imported from vendors in China, the Case Hardened Steel can be availed from us at very competitive rates.
Used To Make
|
| Grade | % | C | Mn | Si | Ni | Cr | Mo | S | AI |
| En-36C | Min | 0.12 | 0.30 | 0.10 | 3.00 | 0.60 | 0.10 | Max | |
| Max | 0.18 | 0.06 | 0.35 | 3.75 | 1.10 | 0.25 | 0.02 | ||
| 17 CrNiM06 | Min | 0.14 | 0.40 | 0.15 | 1.40 | 1.50 | 0.25 | Max | |
| Max | 0.19 | 0.60 | 0.40 | 1.70 | 1.80 | 0.35 | 0.02 | ||
| SAE8620 | Min | 0.18 | 0.70 | 0.15 | 0.40 | 0.40 | 0.15 | Max | |
| Max | 0.23 | 0.90 | 0.35 | 0.70 | 0.60 | 0.25 | 0.02 | ||
| 20MnCr5 | Min | 0.17 | 1.10 | 0.15 | Max | ||||
| Max | 0.22 | 1.40 | 0.40 | 0.02 | |||||
| DIN 20 Cr Ni 4 | Min | 0.19 | 0.95 | 0.20 | 0.90 | 1.05 | Max | 0.20 | |
| Max | 0.21 | 1.05 | 0.30 | 1.20 | 1.15 | 0.02 | 0.25 | ||
| EN 353 | Min | 0.20 | 0.50 | 0.35 | 1.00 | 0.75 | 0.08 | Max | |
| Max | Max | 1.00 | Max | 1.50 | 1.25 | 0.15 | 0.02 | ||
| EN- 354 | Min | Max | 0.50 | Max | 1.50 | 0.75 | 0.10 | Max | |
| Max | 0.20 | 1.00 | 0.35 | 2.00 | 1.25 | 0.20 | 0.02 |
We offer Bearing Steel that has right amount of carbon (0.55 to 1.10 percent), manganese (0.10 to 1.15 percent), silicon (0.15 to 2.0 percent), phosphorus and sulfur up to a maximum of 0.03 percent and chromium (0.5 to 2.0 percent). The remaining percent is that of iron. Chemical properties determine the anti-corrosive properties of the Bearing Steel. The chemical composition of the steel also dictates the mechanical and physical properties of strength and hardness, toughness and brittleness and ductility and malleability that can be found in our Bearing Steel.
Details
Bearing steel has enormous hardness because the manufacturing process of Bearing Steel requires melting and degassing of the metal followed by certain metallurgical processes. It is then tempered and quenched. Bearing steel has a bending strength of 2400 MPa (Pascal Unit) and can withstand high stress and centrifugal forces. But it has a low corrosion resistance. Bearings materials can either be through-hardened or case-hardened and may also require vacuum-processing to ensure purity. A minimum expected hardness for bearing components is 58 Rc (measurement of hardness) but it has generally higher hardness levels.
Technical Specifications
| Grade | % | C | Mn | Si | Ni | Cr | Mo | S | P |
| SAE 52100 | Min | 0.98 | 0.25 | 0.15 | - | 1.30 | - | Max | Max |
| EN31 |
Stainless Steels are high alloy steels that can be classified as magnetic (ferritic and martensitic) and non-magnetic (austenitic) types. Your search for top quality Stainless Steel ends with us. We offer Stainless Steel having superior corrosion resistance, heat resistance as well as good strength and elongation. The different grades of Stainless Steel offered by us are used in manufacturing various industrial, commercial and household products.
Ideal For
Technical Specifications
| Grade | % | C | Mn | Si | NI | Cr | Mo | S | P |
| AISI 304 | Min | 0.08 | 2.00 | 0.75 | 8.00 | 18.00 | 0.03 | 0.04 | |
| Max | Max | Max | Max | 11.00 | 20.00 | Max | Max | ||
| AISI 304L | Min | 0.04 | 2.00 | 0.75 | 8.00 | 18.00 | 0.03 | 0.04 | |
| Max | Max | Max | Max | 13.00 | 20.00 | Max | Max | ||
| AISI 316 | Min | 0.08 | 2.00 | 0.75 | 11.00 | 16.00 | 2.00 | 0.03 | 0.04 |
| Max | Max | Max | Max | 14.00 | 18.00 | 3.00 | Max | Max | |
| AISI 316L | Min | 0.04 | 2.00 | 0.75 | 10.00 | 16.00 | 2.00 | 0.03 | 0.04 |
| Max | Max | Max | Max | 15.00 | 18.00 | 3.00 | Max | Max | |
| AISI 321 | Min | 0.08 | 2.00 | 0.75 | 9.00 | 17.00 | 0.03 | 0.04 | |
| Max | Max | Max | Max | 13.00 | 20.00 | Max | Max | ||
| AISI 410 | Min | 0.15 | 1.00 | 1.00 | 11.50 | 0.03 | 0.04 | ||
| Max | Max | Max | Max | 13.50 | Max | Max | |||
| AISI 420 | Min | over 0.15 | 1.00 | 1.00 | 12.00 | 0.03 | 0.04 | ||
| Max | Max | Max | Max | 14.00 | Max | Max1 |
