We are offering micro hardness tester with computer.
specifications:
test force
10g (0.098n), 25g (0.245n), 50g (0.49n), 100g (0.98n), 200g (1.96n), 300g (2.94n), 500g (4.9n), 1000g (9.8n)
rulers
hv0.01, hv0.025, hv0.05, hv0.1, hv0.2, hv0.3, hv0.5, hv1, hv2
minimum measurement unit
0.25μm
measuring the hardness range
1hv-4000hv
hardness value read
digital lcd
total magnification
100x (observed), 400x (measurement)
(expandable up to 200x or 600x)
loading mode
fully automatic (loading, dwell, unloading)
holding time
1-99 seconds
the objective lens and the press head switch
the manual transfer taqie change
specimen allows a maximum height
85mm
indenter center to wall distance
110mm
instrument size
405 × 290 × 480mm (l × w × h)
instrument weight
45kg
light source
led cold light source (continuous 24-hour use life of up to 100,000 hours)
power supply
110v220v + 5%, 5060 hz
xy table
dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm minimum reading: 0.01mm
(optional digital xy table, lcd digital display)
data output
built-in printer (hardness values, maximum and minimum test time, the number of tests, the average)
built-in rs-232 interface
implementation of standards
gbt4340.2 national standards, jjg151 vrof
standard fittings, accessories
10x eyepiece micrometer a vickers indenter a 10x and 40x objective lens of each one, and two standard hardness block, xy table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a
optional
image analysis software, metallurgical equipment, knoop indenter knoop hardness block, 15x eyepiece micrometer, 2.5x objective lens, 20x objective lens, 60x objective lens

We are offering micro hardness tester with computer.
specifications:
test force
10g (0.098n), 25g (0.245n), 50g (0.49n), 100g (0.98n), 200g (1.96n), 300g (2.94n), 500g (4.9n), 1000g (9.8n)
rulers
hv0.01, hv0.025, hv0.05, hv0.1, hv0.2, hv0.3, hv0.5, hv1, hv2
minimum measurement unit
0.25μm
measuring the hardness range
1hv-4000hv
hardness value read
digital lcd
total magnification
100x (observed), 400x (measurement)
(expandable up to 200x or 600x)
loading mode
fully automatic (loading, dwell, unloading)
holding time
1-99 seconds
the objective lens and the press head switch
the manual transfer taqie change
specimen allows a maximum height
85mm
indenter center to wall distance
110mm
instrument size
405 × 290 × 480mm (l × w × h)
instrument weight
45kg
light source
led cold light source (continuous 24-hour use life of up to 100,000 hours)
power supply
110v220v + 5%, 5060 hz
xy table
dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm minimum reading: 0.01mm
(optional digital xy table, lcd digital display)
data output
built-in printer (hardness values, maximum and minimum test time, the number of tests, the average)
built-in rs-232 interface
implementation of standards
gbt4340.2 national standards, jjg151 vrof
standard fittings, accessories
10x eyepiece micrometer a vickers indenter a 10x and 40x objective lens of each one, and two standard hardness block, xy table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a
optional
image analysis software, metallurgical equipment, knoop indenter knoop hardness block, 15x eyepiece micrometer, 2.5x objective lens, 20x objective lens, 60x objective lens