We are offering diesel engines. bhp (hp) 3.50 5.00 bore x stroke (mm) 80 x 76 87.5 x 80 cubic capacity (cc) 382.00 481.00 compression ratio 17.25:1 16.7:1 number of cylinders 1.00 1.00 lub oil sub capacity (liter) 1.30 1.30 fuel tank capacity (liter) 3.75 3.75 bare engine net wt./gross wt.kg. 83/125 83/125 bare overall dimensions of packing l x w x h 622 x 520 x 710 660 x 559 x 790 pump set net wt. / gross wt.kg. 120/170 122/182 pump set overall dimensions of packing l x w x h 930 x 470 x 742 1016 x 533 x 860

• Brand Nameyour choice

We are offering vertical turbine pumps are multistage pumps. Available in 3, 4, 5, 6, 7, 8, 9 stages. Ideally used for deep borehole depths. we are leading suppliers of centrifugal pumps (horizontal surface pumps), vertical turbine pumps & diesel engines. We also supply integral pump parts, such as impellers, flanges & spiders. kindly send us your detailed requirement so we can give the best possible offer.

We are offering stainless steel bright bars. bright bars: facilities: • annealing • peeling • straightening • centreless grinding • polishing • cutting annealing: we are equipped with electric annealing furnaces of proven quality & adequate capacity. The process is extremely controlled which softens the steel to improve machinability & relieve internal stresses induced during previous operations. (rolling, forging etc) pre straightning: the raw material is straightened before being peeled in order to maintain the accuracy of peeling. If the raw material is not found up to the desired standards, it is not allowed to pass to the next stage. peeling: in this stage, the straightened raw material passes through the peeling machine and is peeled as per the required size by a cutter made out of tungsten carbide. The rotary motion of the cutter ensures accurate and even peeling of the raw material. post straightning: the material is now re-straightened to make it ready for precise centreless grinding. centreless grinding: the straightened peeled bars are accurately grounded within tight specified tolerances. cut to length: the finished ground bars are cut according to customer’s requirement using horizontal band saw machines. inspection: the finished material is checked for size tolerance, straightness, length of bar, mechanical properties, surface defects, out roundness, ndt for surface cracks, & packing standards. For ensuring the quality at every step, well equipped laboratory is in place with ultra-modern equipments. Well-documented procedures ensure correctness in testing and certification of the products. material handling is done with forklifts, mobile cranes and eot’s that are available for trouble free easy material handling purpose. Precise digital weighing machines are used for weighment. bright bars made out of stainless steel: bright bars are made from stainless steel grade aisi 420 having following material composition:- a. carbon , c – 0.16 % b. manganese , mn – 1.0 % c. silicon , si – 1.0% d. chromium , cr – 12 – 14 % e. sulphur , s – 0.030 % f. phosphorous , p – 0.030 % balance is iron (fe)

• Brand NameYour Choice

We offer centrifugal water pump (horizontal surface pump) is a single pump. Used for extraction of water from shallow depth. Ideal for wells, ponds, rivers. we are suppliers of centrifugal pump (horizontal surface pumps), vertical turbine pumps & diesel engines. We also supply integral water pump parts, such as impellers, spiders & flanges. please send us your detailed requirements, so we can give our best offer.

• Brand Nameyour choice

We are offering flanges. 2 pieces of flange plates (for picture refer below & 1 piece of spider is used to connect 2 pipes. Flanges and spiders are one of the most integral spare parts of water pumps.

We are offering diesel engines. bhp (hp) 3.50 5.00 bore x stroke (mm) 80 x 76 87.5 x 80 cubic capacity (cc) 382.00 481.00 compression ratio 17.25:1 16.7:1 number of cylinders 1.00 1.00 lub oil sub capacity (liter) 1.30 1.30 fuel tank capacity (liter) 3.75 3.75 bare engine net wt./gross wt.kg. 83/125 83/125 bare overall dimensions of packing l x w x h 622 x 520 x 710 660 x 559 x 790 pump set net wt. / gross wt.kg. 120/170 122/182 pump set overall dimensions of packing l x w x h 930 x 470 x 742 1016 x 533 x 860

• Brand Nameyour choice

We are offering vertical turbine pumps are multistage pumps. Available in 3, 4, 5, 6, 7, 8, 9 stages. Ideally used for deep borehole depths. we are leading suppliers of centrifugal pumps (horizontal surface pumps), vertical turbine pumps & diesel engines. We also supply integral pump parts, such as impellers, flanges & spiders. kindly send us your detailed requirement so we can give the best possible offer.

We are offering stainless steel bright bars. bright bars: facilities: • annealing • peeling • straightening • centreless grinding • polishing • cutting annealing: we are equipped with electric annealing furnaces of proven quality & adequate capacity. The process is extremely controlled which softens the steel to improve machinability & relieve internal stresses induced during previous operations. (rolling, forging etc) pre straightning: the raw material is straightened before being peeled in order to maintain the accuracy of peeling. If the raw material is not found up to the desired standards, it is not allowed to pass to the next stage. peeling: in this stage, the straightened raw material passes through the peeling machine and is peeled as per the required size by a cutter made out of tungsten carbide. The rotary motion of the cutter ensures accurate and even peeling of the raw material. post straightning: the material is now re-straightened to make it ready for precise centreless grinding. centreless grinding: the straightened peeled bars are accurately grounded within tight specified tolerances. cut to length: the finished ground bars are cut according to customer’s requirement using horizontal band saw machines. inspection: the finished material is checked for size tolerance, straightness, length of bar, mechanical properties, surface defects, out roundness, ndt for surface cracks, & packing standards. For ensuring the quality at every step, well equipped laboratory is in place with ultra-modern equipments. Well-documented procedures ensure correctness in testing and certification of the products. material handling is done with forklifts, mobile cranes and eot’s that are available for trouble free easy material handling purpose. Precise digital weighing machines are used for weighment. bright bars made out of stainless steel: bright bars are made from stainless steel grade aisi 420 having following material composition:- a. carbon , c – 0.16 % b. manganese , mn – 1.0 % c. silicon , si – 1.0% d. chromium , cr – 12 – 14 % e. sulphur , s – 0.030 % f. phosphorous , p – 0.030 % balance is iron (fe)

• Brand NameYour Choice

We offer centrifugal water pump (horizontal surface pump) is a single pump. Used for extraction of water from shallow depth. Ideal for wells, ponds, rivers. we are suppliers of centrifugal pump (horizontal surface pumps), vertical turbine pumps & diesel engines. We also supply integral water pump parts, such as impellers, spiders & flanges. please send us your detailed requirements, so we can give our best offer.

• Brand Nameyour choice

We are offering flanges. 2 pieces of flange plates (for picture refer below & 1 piece of spider is used to connect 2 pipes. Flanges and spiders are one of the most integral spare parts of water pumps.