SUN POWER SERVICES

Kundrathur, Chennai, Tamil Nadu

Ensure uninterrupted power supply for your critical operations with our reliable Automatic Mains Failure (AMF) panels. Designed to automatically detect a mains power outage, start your backup generator, and seamlessly transfer the load, our AMF panels provide essential protection and peace of mind. When mains power is restored, the panel intelligently transfers the load back and shuts down the generator.

Maximize power capacity, reliability, and efficiency with our advanced Generator Synchronization (Sync) Panels. These panels are expertly designed to safely parallel multiple generator sets, allowing them to operate together as a single, unified power source. Ideal for applications demanding high power availability, redundancy, or optimized load management, our sync panels ensure seamless synchronization and precise load sharing between generators, and can optionally synchronize with the mains utility grid Key Features:Automatic synchronization of multiple generators (matching voltage, frequency, and phase angle).Precise active (kW) and reactive (kVAR) load sharing capabilities (Isochronous or Droop modes).Comprehensive generator protection (Reverse Power, Over/Under Voltage/Frequency, Overcurrent, etc.).Option for automatic mains paralleling (synchronization with utility grid for peak shaving or export, where permitted).Advanced PLC-based or dedicated sync controllers with intuitive HMI/display.Load-dependent starting and stopping of generators for fuel optimization.Manual paralleling controls for testing and commissioning.Scalable design to accommodate future expansion.Robust, compartmentalized enclosure for safety and durability (Specify IP rating if known, e.g., IP54 Form 4)

Ensure your generator is always ready to start with our reliable and efficient Industrial Battery Chargers. Designed specifically for maintaining the starter batteries of diesel and gas generator sets, these chargers prevent battery discharge during standby periods. They deliver intelligent, automatic multi-stage charging to keep batteries in optimal condition, maximizing their lifespan and guaranteeing reliable engine cranking when mains power fails or prime power is required. Benefits:**Guaranteed Generator Start-up:** Ensures batteries have sufficient charge for reliable cranking.**Extended Battery Lifespan:** Prevents damage from undercharging or overcharging.**Reduced Downtime & Costs:** Avoids costly failures and emergency callouts due to dead batteries.**Fully Automated Operation:** "Set and forget" design requires minimal user intervention.**Enhanced System Safety:** Integrated protections safeguard the battery, charger, and generator system.**Optimal Battery Performance:** Maintains batteries at peak condition for maximum reliability.**Peace of Mind:** Confidence that your critical backup power system is always ready.

Power your critical applications with our range of high-performance Industrial Engines. We supply robust and fuel-efficient diesel and gas engines designed for continuous operation in demanding environments. Built for durability and reliability, these engines are the heart of countless machines, from power generators and construction equipment to agricultural machinery and industrial pumps. Trust our engines to deliver the power you need, when you need it. Key Features:Robust Construction: Heavy-duty components for long life and operation in tough conditions.Proven Reliability: Engineered for maximum uptime and dependable performance.Fuel Efficiency: Optimized design for lower fuel consumption and operating costs.Wide Power Range: Available in various displacements and power ratings to match application needs.Emissions Compliance: Meeting relevant environmental standards (e.g., EPA Tier, EU Stage - specify if known).Ease of Maintenance: Designed for accessibility and simplified service procedures.Effective Cooling Systems: Ensuring optimal operating temperatures even under heavy load.Reliable Starting Systems: Designed for quick and dependable starts in various climates.Versatile Integration: Suitable for powering a wide array of driven equipment.Low Noise & Vibration options available for specific models/applications

Power your generator sets with engines specifically designed and optimized for reliable electricity production. We supply a comprehensive range of diesel and gas engines engineered for standby, prime, and continuous power applications. These engines offer exceptional load acceptance, precise speed control (typically at 1500/1800 RPM), and robust performance to ensure your generator delivers stable and dependable power when it matters most. Key Features:Optimized for Fixed Speed Operation (1500 RPM for 50Hz / 1800 RPM for 60Hz).Excellent Load Acceptance capability for handling large electrical loads.Precise Speed Governing (Mechanical or Electronic Options) for stable frequency output.High Power Density for compact generator set designs.Designed for GenSet Duty Cycles (Standby, Prime Power, Continuous).Robust Construction for long operational life and reliability.Fuel Efficiency optimized for power generation applications.Emissions Compliance (Relevant EPA Tier / EU Stage standards - specify if known).Easy Integration with alternators and control systems.Effective Cooling Systems designed for continuous operation within enclosures.Global Parts and Service Support (mention if applicable for the brands you carry).

Convert mechanical energy into reliable electrical power with our high-quality Generator Alternators. We supply a wide range of brushless, synchronous AC alternators specifically designed for coupling with diesel or gas engines in generator sets. These alternators feature robust construction, high efficiencies, and precise voltage regulation, ensuring stable power output suitable for demanding standby, prime, and continuous power applications. Key Features:Brushless Design with integrated Automatic Voltage Regulator (AVR) for stable voltage output.Wide Range of kVA Ratings available to match engine power outputs.Multiple Voltage Options (Low, Medium, High Voltage) and configurations (50Hz/60Hz).High Efficiency ratings for optimized generator set fuel consumption.Robust Mechanical Construction with Class H insulation for durability and high-temperature tolerance.Standard IP Protection Ratings (e.g., IP23, IP44) against dust and water ingress.Optimized Winding Pitch (e.g., 2/3 pitch) to reduce harmonic distortion.Compliance with International Standards (e.g., IEC 60034, NEMA MG1, ISO 8528).Single or Double Bearing configurations available.Options for Permanent Magnet Generator (PMG) or Auxiliary Winding (AREP) excitation systems for enhanced motor starting capability

Ensure reliable starting power for your generator engines and industrial equipment with our range of heavy-duty starter batteries. We supply high-quality lead-acid batteries (including Flooded, AGM, and Gel types) specifically chosen for their high cranking performance, durability, and resistance to vibration. Maintaining a charged, high-quality starter battery is critical for the dependability of any standby or prime power system. Key Features:High Cold Cranking Amps (CCA) ratings for powerful engine starting, even in cold conditions.Multiple Ampere-Hour (Ah) Capacities available to suit engine size and system requirements.Various Technologies: Conventional Flooded (Wet Cell), Maintenance-Free (MF), Absorbed Glass Mat (AGM), Gel.Heavy-Duty Construction with reinforced casings and internal components.Vibration Resistance designed for engine and mobile equipment applications.Standard Terminal Types and layouts for easy installation (e.g., Post, Stud).Long Service Life when properly maintained and charged.Available in standard BCI group sizes.Reliable performance across a wide range of operating temperatures

Embrace the electric revolution and future-proof your property or business with our advanced Electric Vehicle (EV) Charging Solutions. We provide reliable, scalable, and intelligent charging stations suitable for residential, commercial, fleet, and public applications. Offer convenience, attract customers/tenants, support employee sustainability goals, and become part of the growing clean transportation network. Key Features:**Flexible Charging Levels:** Level 2 AC charging for everyday use and DC Fast Charging (DCFC) for rapid top-ups.**Smart Connectivity:** Networked options with OCPP compliance for remote management, monitoring, and payment integration.**Load Management:** Intelligent power distribution to optimize energy usage, especially in multi-charger installations.**Durable & Weatherproof:** Robust designs built to withstand outdoor elements (Specify IP/IK ratings if known).**User-Friendly Access:** Options for RFID card, mobile app, or credit card payment systems.**Solar Integration Ready:** Designed to potentially work seamlessly with solar PV systems for greener charging.**Scalable Architecture:** Easily expand your charging infrastructure as demand grows.**Intuitive Interfaces:** Clear status indicators and user-friendly operation

Take control of your energy future and embrace sustainability with our complete Solar Energy Solutions. We provide high-quality solar equipment, including photovoltaic (PV) panels, inverters, mounting structures, and monitoring systems, designed for residential, commercial, and industrial applications. Generate clean, renewable electricity on-site, reduce your reliance on the grid, and make a positive environmental impact. Core Components of Your Solar System:**High-Efficiency PV Panels:** Cutting-edge modules converting sunlight directly into DC electricity (See our Panels page for details).**Advanced Inverters:** Converting DC power from panels into usable AC power for your property (String, Microinverters, Power Optimizers).**Durable Mounting Systems:** Secure racking engineered for various roof types and ground installations, ensuring longevity and safety.**Smart Monitoring Systems:** Track energy production, consumption, and system health in real-time via web or mobile apps.**Optional Battery Storage:** Store excess solar energy for use during nighttime or power outages, maximizing self-consumption (See Battery Storage solutions).**Balance of System (BOS):** All necessary cabling, connectors, isolators, and safety equipment for a complete installation

Capture maximum sunlight and convert it into clean energy with our selection of premium Solar Photovoltaic (PV) Panels. As the foundational component of any solar energy system, the quality and performance of your panels directly impact your energy yield and long-term savings. We offer Tier 1 bankable modules featuring the latest technologies for superior efficiency, durability, and reliability. Key Panel Features & Technologies:**Leading Efficiency Ratings:** Maximize power generation per square meter (Specify types like Monocrystalline PERC).**Tier 1 Manufacturer Brands:** Ensuring quality, reliability, and strong warranty support.**Excellent Performance Warranties:** Typically 25-30 year linear power output guarantees.**Robust Durability:** Engineered to withstand harsh weather conditions (wind, snow, hail - mention certifications like IEC 61215/61730).**Superior Temperature Coefficient:** Maintaining performance even in high ambient temperatures