Delhi, India
GST : 07AADPG6701B1ZE
Add Review
Our Products
case hardening materials available
(ready stock discount sale upto 30% on retail price.)
sae 8620
dia 32mm = 2 length
dia 36mm = 1 length
dia 40mm = 2 length
dia 45mm = 1 length
dia 65mm = 2 length
dia 70mm = 2 length
en 353 / 18nicrc (without moly)
dia 14mm = 35 length
dia 18mm = 4 length
dia 20mm = 8 length
dia 22mm = 10 length
en353
dia 63mm = 2length
dia 40mm = 1 length
dia 32mm = 10 length
ms / en 8
dia 15mm = 100 length
Additional Information:
Payment Terms :
Packaging Details : PACKAGGING CHARGES EXTRA AS PER DEMAND
Delivery Time : WITH 7 DAYS AFTER PAYMENT RECEIVED
Spheroidised steel is a heat treated steel which is used to increase the formability and blankability during processing of high strength steel - typically with Carbon content (C %) of 0.45 % and above. This results in steel with Carbon Steel Strip combining ease of fabrication with good strength and surface finish.
Owing to the support of our experts, we supply a range of medium carbon steel strips that ensures durable finishing, rust resistance, reliability and high quality. Our ranges of these find numerous applications in various industries., for instance Automobile Seat Belts, Safety Products (Seat Belts, Brake Components) Speciality Chains, Fine Blanked Components, Transmission parts etc.
Specifications
| Euronorm | Germany | UK | USA | |||||
|---|---|---|---|---|---|---|---|---|
| EN 10132-4 | DIN 17222 | BS 1449 | SAE J403 | %C | %Mn | %Si | %S | %P |
| C50E | CK 50 | CS50 | SAE 1050 | .45-.55 | .50-.90 | .05-.35 | .040 max | .045 max |
| C67S | CK67/C67 | CS70 | SAE 1070 | .68- .73 | .60- .85 | .15- .25 | .01 max | .02 max |
| C75S | CK75/C75 | CS70 | SAE 1074 | .70- .75 | .60- .80 | .15- .30 | .025 max | .025 max |
| C85S | CK85 | CS80 | SAE 1085 | .80- .90 | .40- .70 | .15- .35 | .025 max | .025 max |
Forging Die Steel is nickel hot work tool steel with good hardenability. uniform hardness over section also at great dimensions . Resistance under impact loadings. Very good strength and toughness. Good tempering resistance and dimensional stability. Tools can be water or air cooled.
Application
Physical properties (avarage values) at ambient temperature :
Specification 01
| Designation by Standards | ||||
|---|---|---|---|---|
| Ravne No. | Mat. No. | DIN | EN | AISI |
| 854 |
1.2714 |
56NiCrMoV7 | 55CrMo8 | DB 6 |
Specification 02
| Chemical Composition in Weight % | ||||||||
|---|---|---|---|---|---|---|---|---|
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.55 | 0.25 | 0.75 | 1.10 | 0.45 | 1.65 | 0.1 | - | - |
Specification 03
| Thermal conductivity [W/m.K] | ||
|---|---|---|
| 20oC | 500oC | 600oC |
| 36 | 36.8 | 36 |
Specification 04
| Electric resistivity [Ohm mm2/m] | ||
|---|---|---|
| 20oC | 500oC | 600oC |
| 0.30 | 0.70 | 0.840 |
Specification 05
| Specific heat capacity[J/g.K] | ||
|---|---|---|
| 20oC | 500oC | 600oC |
| 0.46 | 0.55 | 0.59 |
Specification 06
| Coefficient of Linear Thermal Expansion 10-6oC-1 | ||||||
|---|---|---|---|---|---|---|
| 20-100oC | 20-200oC | 20-300oC | 20-400oC | 20-500oC | 20-600oC | 20-700oC |
| 11.7 | 12.1 | 13.0 | 13.5 | 14.0 | 14.3 | 14.6 |
Availabke Sizes
| AISI | DIN | Supply Condition | Rounds | Square | Flat |
| DB6 |
1.2714 |
Hardened & Tempered | 90 – 700 dia | 20 - 600 | 300 X 155 – 1000 X 600 |
The Cold Die Steel Blocks supplied by us is used in the industries at normal temperature conditions. Thus, Cold Die Steel Blocks requires high resistance to wear and tear along with toughness. We make sure that we obtain Cold Die Steel Blocks from the best manufacturers so as to meet high expectations of the industry. It is years of trust that we have built by delivering Cold Die Steel Blocks that is marked for quality and higher durability.
Highlights :
Product Specifications Of Cold Work Tool Steel
| - | Material | Chemistry | Heat Treatment Details | |||||||||||||||
| AISI/ ASTM |
EN | DIN | JIS | C | SI | Mn | P | S | Cr | W | Mo | V | Anealing (Slow Cooling) |
Quenchent (Hot Bath) |
Quenching | Tempering (Air Cooling) |
Annealed (HB) - Max |
Quenched (Hrc) Tempered |
| D3 | X210Cr12 | 1.2080 | SKD1 | 2 | 0.25 | 0.45 | 0.03 | 0.01 | 12 | - | - | - | 830-880 | OIL/AIR | 930-980 | 150-200 | 248 | 61 |
| D2 | X155Cr Vmo V12.1 | 1.2379 | SKD11 | 1.55 | 0.25 | 0.35 | 0.03 | 0.01 | 12 | - | 0.9 | 0.9 | 800-850 | AIR/OIL | 980-1030 | 150-200 | 248 | 60 |
| 01 | 100MNCrW4 | 1.2510 | SKS3 | 0.95 | 0.25 | 1.1 | 0.03 | 0.01 | 0.6 | 0.6 | 0.1 | - | 750-780 | OIL | 800-850 | 150-200 | 220 | 60 |
| S1 | 60WCrV7 | 1.2550 | - | 0.6 | 0.6 | 0.3 | 0.03 | 0.01 | 1.1 | 2 | - | 0.2 | 710-750 | OIL | 780-820 | 150-200 | 225 | 58 |
| 02 | 90MnCrV8 | 1.2842 | - | 0.9 | 0.25 | 2 | 0.03 | 0.01 | 0.4 | - | - | 0.1 | 680-720 | OIL | 790-820 | 150-200 | 220 | 56 |
Stocking Programme Of Cold Work Tool Steel
| COLD WORK | AISI | DIN | Supply Condition | Rounds | Square | Flat | Application |
| D3 | 1.2080 | Annealed | 8 - 660 | 20 - 250 | 20X10 - 1000X200 | Rolls for cold strip mills and wire squeezer mills, dies for small metal parts, punching and drawing dies for sinterings. | |
| D2 | 1.2379 | Annealed | 8 - 700 | 20 - 250 | 20X10 - 1000X200 | Shear blades, blanking punches, die chasers, rolls for cold mills treading rolls and chasers, molds for plastic materials. | |
| O2 | 1.2842 | Annealed | 8 - 660 | 20 - 250 | 20X10 - 500X150 | Taps, shear knives, moulds for plastic materials, gages, knives for woodand paper working. | |
| S1 | 1.2550 | Annealed | 25 - 210 | - | 100X40 - 300X80 | Tools exposed to voilent impacts such as piercing punches, hammers, debarring and coining tools, shear blades. | |
| O1 | 1.2510 | Annealed | 8 - 500 | 20 - 250 | 20X10 - 500X150 | Dies, blanking punches, moulds for plastic materials. |
Hot Die Steel is mainly used for applications such as forging, shearing, punching, and pressure die casting. Being a well-acclaimed Hot Die Steel Supplier, we procure quality-tested product from reliable vendors. Our Hot Die Steel works best at high temperatures and offers high resistance to wear and tear or cracking.
Some Of The Properties Of Our Hot Die Steel
Product Specifications Of Hot Die Steel
| - | Material | Chemistry | Heat Treatment Details | |||||||||||||||
| AISI/ ASTM |
EN | DIN | JIS | C | SI | Mn | P | S | Cr | W | Mo | V | Anealing (Slow Cooling) |
Quenchent (Hot Bath) |
Quenching | Tempering (Air Cooling) |
Annealed (HB) - Max |
Quenched (Hrc) Tempered |
| H11 | X38CrMoV5-1 | 1.2343 | - | 0.38 | 1.1 | 0.4 | 0.03 | 0.01 | 5 | - | 1.25 | 750-800 | OIL/AIR | 100-1040 | 500-600 | 240 | 48 | |
| H12 | X40CrMoV5-1 | 1.2344 | SKD61 | 0.40 | 1.1 | 0.4 | 0.03 | 0.01 | 5.2 | - | 1.4 | 0.9 | 800-850 | OIL/AIR | 1000-1085 | 500-600 | 230 | 52 |
| H13 | - | 1.2606 | SKD62 | 0.39 | 1.1 | 0.4 | 0.03 | 0.01 | 5.2 | 1.25 | 1.4 | 800-870 | OIL/AIR | 1000-1050 | 500-600 | 230 | 52 | |
| L6 | 56NiCrMoV7 | 1.2714 | SKT4 | 0.55 | 0.25 | 0.8 | 0.03 | 0.02 | 1.2 | - | 0.4 | 0.2 | 750-800 | OIL | 830-850 | 400-650 | 240 | 50 |
| H21 | X30WCrV9-3 | 1.2581 | - | 0.35 | 0.25 | 0.3 | 0.03 | 0.03 | 2.7 | 9 | - | 0.1 | 750-800 | OIL/AIR | 1070-1150 | 500-600 | 240 | 51 |
Stocking Programme Of Hot Die Steel
| HOT WORK | AISI | DIN | Supply Condition | Rounds | Square | Flat | Application |
| H11 | 1.2343 | Annealed | 4 - 500 | - | 100X20 - 1000X300 | Dies for pressure casting of light alloys, dies for presses for hot forming steel, brass, aluminium and its alloys, hot work shear blades. | |
| H13 | 1.2344 | Annealed | 4 - 500 | 20 - 300 | 100X20 - 1000X300 | Dies for pressure casting of light alloys, dies for aluminium extrusion dies for hot forming of steels, extractors. | |
| H12 | 1.2606 | Annealed | - | - | 300X65 - 500X150 | Cast moulds for aluminium and zinc alloys. | |
| L6 | 1.2714 | Hardened & Tempered | 90 - 700 | 20 - 600 | 300X155 - 1000X600 | Blocks for dies, hammers and pile drivers, rams of power hammers, hot mill rolls, very hard, cold work dies and punches. | |
| H21 | 1.2581 | Annealed | 30 - 200 | - | - | Extrusion moulds and cast moulds for copper, aluminum and zinc alloys. |
These are the steels that are used for Plastic Mould. The plastic products changes almost everyday and we as a part of that business, supply parts for the manufacturing of moulds for sizes upto large blocks for panels and automotive fenders. Plastics has taken an outstanding position amongst the products we come in contact in our daily lives. We offer a different grades adaped to the needs of various moulding applications for the manufacturing of parts from simplest to most sophisticated like Chairs, Telephones, TV Frames, Printers, Monitors, Keyboards, Water Tanks, Dashboards, etc.
Properties & Characteristics
Applications
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : payment cash / bank transfer
cartage, freight, cutting, tax 5% extra
Delivery Time : 3 days
Roduct Specifications Of Plasic Mould Steel
| - | Material | Chemistry | Heat Treatment Details | ||||||||||||||
| AISI/ ASTM | EN | DIN | JIS | C | SI | Mn | Ni | S | Cr | W | Mo | V | Anealing (Slow Cooling) | Quenchent (Hot Bath) | Quenching | Tempering (Air Cooling) | Annealed (HB) - Max |
| P20 | 40CrMnMo7 | 1.2311 | - | 0.4 | 0.3 | 1.5 | - | 0 | 1.9 | - | 0.2 | - | 720-750 | OIL/AIR | 850-880 | 600-680 | 240 |
| P20+Ni | 40CrMnNiMo864 | 1.2738 | - | 0.4 | 0.3 | 1.5 | 1.1 | 0 | 2 | - | 0.2 | - | 720-740 | OIL/AIR | 850-880 | 710-740 | 240 |
| P29+S | 40CrMnMoS86 | 1.2312 | - | 0.4 | 0.3 | 1.5 | - | 0.07 | 1.9 | - | 0.2 | - | 740-760 | OIL/AIR | 840-870 | 600-680 | 240 |
| - | 36CrMo17 | 1.2316 | SUS420J | 0.36 | 0.4 | 0.65 | 1 | 0 | 16 | - | 1.2 | - | 780-820 | OIL | 1000-1040 | 600-700 | 235 |
| 420 | 42Cr13 | 1.2083 | SUS420F | 0.42 | 0.4 | 0.45 | - | 0 | 14 | - | 0.6 | - | 840-870 | OIL | 1000-1050 | 250-570 | 200 |
Stocking Programme Of Plasic Mould Steel
| Plastic Mould | AISI | DIN | Supply Condition | Rounds | Square | Flat | Application |
| P20 | 1.2311 | Hardened & Tempered | 75 - 300 | - | 200X40 - 1000X600 | Steel suitable for die upto 400mm thickness with very good polishing. | |
| P20+Ni | 1.2738 | Hardened & Tempered | 75 - 300 | - | 200X40 - 1000X600 | Best suited for 400mm thickness. Adding 1% Nickele ensures full quenching and tempering upto 1000mm thickness | |
| P20+S | 1.2312 | Hardened & Tempered | 75 - 300 | - | 200X40 - 1000X600 | It offers better workability. Applications are same but less requirements of polishing. | |
| 420mod | 1.2316 | Hardened & Tempered | 50 - 160 | - | 200X40 - 1000X250 | Well suitable for processing chemically aggressive and acid releasing plastic such as PVC. | |
| 420 | 1.2083 | Annealed | - | - | 300X60 - 500X250 | Moulds for processing plastics with corrosive action, very highly polishable. |
hot work Die steel is mainly used for applications such as forging, shearing, punching, and pressure die casting. Being a well-acclaimed hot work tool steel supplier, we procure quality-tested product from reliable vendors. Our hot work tool steel works best at high temperatures and offers high resistance to wear and tear or cracking. some of the properties of our hot work tool steel superior strength, low thermal expansion co, efficient, high thermal conductivity, good welding ability h11, x38crmov5-1, 1.2343, h13, x40crmov5-1, 1.2344, skd61, l6, 56nivrmov7, 1.2714, skt4, h21, x3owcr9-31. and used for hot extrusion tools, tools for manufacture of screws, nuts, bolts etc, die casting tool extrusion tool for al, zn, mg. Shear blade, plastic mould etc press forging dies, extusion tool ect, with good resissing to wearh hot forming(forging )dies. For processing heavy metall hammer dies, press forging dies, shear blade etc (pre hardened on supply) very high strength hot working steels. processing heavy metal alloys.
Additional Information:
Payment Terms :
Delivery Time : 3 DAYS
we supply premium crca coils that are in compliance with high industrial standards. We make sure that our crca coils are sourced from well-known vendors. Our crca coils are designed keeping precision and strength in mind. With our strict quality policies, we conduct double checks while obtaining and before delivering crca coils. We deliver crca coils on a timely basis. Why our crca coils? flawless design structurehigher dimensional tolerancesperfect surface finish quality-tested
