Mumbai, Gujarat, India
Our Products
Galvanised Steel Earth Rods are made up of high Strength low carbon
steel and hot dip galvanized. This design of the rod is actually cost
effective option for earthing.
|
Cross Earth Rod, Hot Galvanised Steel with Holes of 11 mm or 13 mm
|
Sizes |
Length |
Product Code |
|
|
With Flag |
Without Flag |
||
|
50 x 50 x 3 |
1000 |
ACERF - 10 |
ACER - 10 |
|
50 x 50 x 3 |
1500 |
ACERF - 15 |
ACER - 15 |
|
50 x 50 x 3 |
2000 |
ACERF - 20 |
ACER - 20 |
|
50 x 50 x 3 |
2500 |
ACERF - 25 |
ACER - 25 |
|
50 x 50 x 3 |
3000 |
ACERF - 30 |
ACER - 30 |
Taper Pointed Rod
Material - Electrolytic Copper / Aluminum
Air Rod can be installed with or without Multiple Point.
Aerial Elevation Rod
Material - Electrolytic Copper / Aluminum
Air Rod can be installed with or without Multiple Point.
| Rod Dia. |
Thread Dia. | Length of Rod |
Product Code Taper Pointed Rod |
Product Code |
| 15 | 5/8” | 500 | AAE - 5 | AER - 5 |
| 15 | 5/8” | 1000 | AAE - 10 | AER - 10 |
| 15 | 5/8” | 2000 | AAE - 20 | AER- 20 |
| 17.2 | 3/4” | 500 | AAE - 5A | AER- 5A |
| 17.2 | 3/4” | 1000 | AAE - 10A | AER- 10A |
| 17.2 | 3/4” | 2000 | AAE - 20A | AER- 20A |
(Junction Box, Loop in Box, Adaptable Box, Bends, Elbow, Tee, Inspection Tee, Fan Box, Space Bar Saddle strap, couplers, Female adaptor with Bush
| materialfinish | -- | brassnickel plated |
.
.
Flanged coupling will be complete with Brass Bush and lead washer.
| Colour | - | WHITE 1 GANG / 2 GANG, SQUARE CORNER WITH BRASS THREADS |
Features:
| Length (mm) | Width (mm) | Max Bundle Dia (mm) | Product Code |
| 100 | 4.6 | 16 | AH 100 |
| 150 | 4.6 | 32 | AH 150 |
| 200 | 4.6 | 50 | AH 200 |
| 360 | 4.6 | 101 | AH 360 |
| 520 | 4.6 | 152 | AH 520 |
| 680 | 4.6 | 203 | AH 680 |
| 840 | 4.6 | 254 | AH 840 |
| 1000 | 4.6 | 298 | AH 1000 |
To BS 4568 part 21970 (imperial size to BS 31 1940)
CIRCULAR JUNCTION BOXESSTANDARD SMALL ROUND
| Description | Size in mm | Product Code | |
| Terminal (1 way) | 20mm | AJB - 1 | |
| 25mm | AJB - 2 | ||
| Back Outlet | 20mm | AJB - 3 | |
| 25mm | AJB - 4 | ||
| Terminal and Back Outlet (1 way) | 20mm | AJB - 5 | |
| 25mm | AJB - 6 | ||
| Through (2 way) | 20mm | AJB - 7 | |
| 25mm | AJB - 8 | ||
| Through and Back Outlet (2 way) | 20mm | AJB - 9 | |
| 25mm | AJB - 10 | ||
| Angle (2 way) | 20mm | AJB - 11 | |
| 25mm | AJB - 12 | ||
| Angle and Outlet (2 way) |
20mm | AJB - 13 | |
| 25mm | AJB - 14 | ||
| Tangent Through (2 way) |
20mm | AJB - 15 | |
| 25mm | AJB - 16 | ||
| Tangent Angle (2 way) | 20mm | AJB - 17 | |
| 25mm | AJB - 18 | ||
| Tangent Tee (3 way) | 20mm | AJB - 19 | |
| 25mm | AJB - 20 | ||
| Branch (3 way) | 20mm | AJB - 21 | |
| 25mm | AJB - 22 | ||
| Twin Terminal (2 way) | 20mm | AJB - 23 | |
| 25mm | AJB - 24 | ||
| Tee (3 way) | 20mm | AJB - 25 | |
| 25mm | AJB - 26 | ||
| Tree and Back outlet (3 way) |
20mm | AJB - 27 | |
| 25mm | AJB - 28 | ||
| Twin Through (4 way) | 20mm | AJB - 29 | |
| 25mm | AJB - 30 | ||
| Intersection (4 way) | 20mm | AJB - 31 | |
| 25mm | AJB - 32 | ||
| Intersection and Back Outlet | 20mm | AJB - 33 | |
| 25mm | AJB - 34 |
material -steel, stainless steel
finish-hot dip galvanized after fabrication, powder coated, other finishing available on requeststandard height:from 25 mm to 125 mm
standard width:from 50 mm to 300 mm
standard thickness:the thickness of the body and lid are available in any combinations of 20g, 18g, 16g and 14g
standard colors:orange, green, white and red. Other colors are available on special request
| Size (mm) | Standard Length | Internal Cross Section Area mm | Product Code |
| 16 x 16 | 2.9 | 161 | ATX - 1616 |
| 25 x 16 | 2.9 | 265 | ATX - 2516 |
| 38 x 16 | 2.9 | 443 | ATX - 3816 |
| 38 x 25 | 2.9 | 748 | ATX - 3825 |
| 50 x 50 | 2.9 | 710 | ATX - 5050 |
| 75 x 50 | 2.9 | 2090 | ATX - 7550 |
| 75 x 75 | 2.9 | 3900 | ATX - 7575 |
| 100 x 50 | 2.9 | 5600 | ATX - 1050 |
| 100 x 100 | 2.9 | 9800 | ATX - 1010 |
One Hole Cable Clip
Material - Electrolytic Copper
These are recommended to fix cable conductors.
| For Solid Conductor | For Stranded Conductor | ||
| Size MM | Product Code | Size mm2 | Product Code |
| 8 | AOH - 8 | 50 | AOH - 50 |
| 10 | AOH - 10 | 70 | AOH - 70 |
| 12 | AOH - 12 | 95 | AOH - 95 |
| 16 | AOH - 16 | - | - |
| TypeSize G Type | -- - | Plain, Dotted / Punched & Slotted35mm x 7.5mm, 15mm x 5.5mm, 35mm x 15mm32mm x 15mm x 9mm |
| Properties:Smooth Inner surface, flexible, twistable in vertical and axial direction, break proof , weather proof and resistant to chemicals, grease, spindle and machinery oils, applicable for protecting installations under any conditions. | |||
| Operating Temperature rangeConstructionsColourBending Radius | ---- | -50c to + 600cManufactured with hardened PVC spiral and soft PVC WallGrey2 x I.D of tube | |
Mechanically copper claded grounding rod is made
when electrolytic grade 99.9% copper tube with
wall thickness of 0.25 (250 microns) is claded
to a low carbon steel rod. Even if the rod is bent by 450,
the copper tube should not peel out of the steel rod.
|
Rod DIA. mm |
Length |
Thread DIA |
Product Code |
|
12 |
1200 |
M8 |
ACR - 1212 |
|
12.5 |
1200 |
M8 |
ACR - 12512 |
|
14 |
1200 |
M10 |
ACR - 1412 |
|
14 |
1500 |
M10 |
ACR - 1415 |
|
15 |
1200 |
M10 |
ACR - 1512 |
|
15 |
1500 |
M10 |
ACR - 1515 |
|
16 |
1200 |
M10 |
ACR - 1612 |
|
16 |
1500 |
M10 |
ACR - 1615 |
|
20 |
1200 |
M12 |
ACR - 2012 |
|
20 |
1500 |
M12 |
ACR - 2015 |
|
Nominal area mm |
Dimension mm |
Wire diameter mm |
Current rating amps |
Catolouge No |
|
2.5 |
6 x 1.00 |
0.15 |
36 |
AB -2.5-36 |
|
4 |
10 x 1.00 |
0.15 |
52 |
AB -4-52 |
|
6 |
12 x 1.00 |
0.15 |
66 |
AB -6-66 |
|
10 |
15 x 1.50 |
0.15 |
90 |
AB -10-90 |
|
16 |
19 x 2.00 |
0.15 |
120 |
AB -16-120 |
|
25 |
25 x 3.00 |
0.15 |
150 |
AB- 25-150 |
|
35 |
25 x 3.50 |
0.15 |
200 |
AB- 35-200 |
|
50 |
30 x 4.50 |
0.15 |
250 |
AB- 50-250 |
|
70 |
32 x 5.00 |
0.15 |
300 |
AB- 70-300 |
|
95 |
37 x 5.00 |
0.15 |
350 |
AB- 95-350 |
|
120 |
45 x 5.00 |
0.15 |
400 |
AB- 120-400 |
|
150 |
50 x 6.00 |
0.15 |
500 |
AB- 150-500 |
Highly Cu flexible bare, tin & silver coated. Round braids are used for carbon brushes, relays, gaskets, telecom, automobiles , earthing etc.
FEATURES-
*Means of connection or an earth bond-around the cable gland.*Available in various shapes & in all sizes.*Ensure earth continuity between the electrical equipment & the gland.*Can be coated or plated as per Customer Specification
| B Bond Material - Gunmetal / Brass / Aluminium These are used for bonding tape to steel structures. |
| Max. Tape Width mm | Bolt Size | Conductor Material | Product Code |
| 25 | M10 | Copper | AB - 25 |
| 25 | M10 | Aluminium | AA - 25 |
| MATERIALFINISHDESIGN FEATURESPROTECTION TYPE | ---- | BrassNickel PlatedAccording to DIN 46230IP 54 |
| Sizes | For cables D (mm) |
Product Code | |
| M 12 x 1.5 | 4 – 6 | AMG - 12 | |
| M 16 x 1.5 | 2 - 10 | AMG - 16 | |
| M 20 x 1.5 | 3 - 14 | AMG - 20 | |
| M 25 x 1.5 | 7.5 - 18 | AMG - 25 | |
| M 32 x 1.5 | 15 - 25 | AMG - 32 | |
| M 40 x 1.5 | 22 - 33 | AMG - 40 | |
| M 50 x 1.5 | 31 - 42 | AMG - 50 | |
| M 63 x 1.5 | 40 - 51 | AMG - 63 | |
| SizeMaterialApplicationFeatures | ---- | Dia- 5mm - 25mmStainless Steel and Galvanised SteelUsed for fixing pipes, cables and hoses.Removable Rubber lined in P Clips. |
| Size (mm) | Product Code | |
| Stainless Steel | Galvanized Steel | |
| 5 | AIP - S5 | AIP - G5 |
| 6 | AIP - S6 | AIP - G6 |
| 8 | AIP - S8 | AIP - G8 |
| 10 | AIP - S10 | AIP - G10 |
| 13 | AIP - S13 | AIP - G13 |
| 16 | AIP - S16 | AIP - G16 |
| 21 | AIP - S21 | AIP - G21 |
| 25 | AIP - S25 | AIP - G25 |
| 32 | AIP - S32 | AIP - G32 |
| 40 | AIP - S40 | AIP - G40 |
| 50 | AIP - S50 | AIP - G50 |
| 63 | AIP - S63 | AIP - G63 |
| MATERIALFINISHNO. OF PARTS | --- | BrassNickle PlatedBody, Clamping Gland, Lock Nut, Ywo Brass Washers, Rubber Thread Seal, Rubber Inner Compression Ring |
| Pipe Thread | Gland ID in MM | Rubber ID | Locknut OD in mm | Gland OD in MM | Total Length | Product Code |
| A | C | D | L | |||
| PF 3/8 | 10 | 8 | 28 | 22 | 38 | ACG - 10 |
| PF 1/2 | 15 | 10 | 31.5 | 28 | 42 | ACG - 15 |
| PF 3/4 | 20 | 13 | 37 | 33.5 | 46 | ACG - 20 |
| PF 1 | 25 | 15 | 45 | 42 | 52 | ACG - 25 |
| PF 1 1/4 | 30 | 24 | 46 | 49.5 | 57 | ACG - 30 |
| PF 1 1/2 | 40 | 30 | 63 | 55 | 65 | ACG - 40 |
| PF 1 1/2 | 40 | 34 | 63 | 55 | 65 | ACG - 40 |
| PF 2 | 45 | 38 | 77 | 69 | 73 | ACG - 45 |
| PF 2 | 50 | 44 | 77 | 69 | 73 | ACG - 50 |
| PF 2 1/2 | 55 | 48 | 96 | 85 | 83 | ACG - 55 |
| PF 2 1/2 | 60 | 54 | 96 | 85 | 83 | ACG - 60 |
| PF 3 | 65 | 60 | 112 | 100 | 95 | ACG - 65 |
| PF 3 | 70 | 64 | 112 | 100 | 95 | ACG - 70 |
| MATERIALFINISH | -E - COPPER-COPPER |
| Amp Rating | Cable Size (AWG) | Stud Hole E | O.D. | I.D. | L | Product Code |
| 35 | 8 | ¼ | 6.35 | 4.72 | 32 | AABL - 86 |
| 8 | 5/16 | 6.35 | 4.72 | 32 | AABL - 88 | |
| 8 | 3/8 | 6.35 | 4.72 | 35.18 | AABL - 810 | |
| 8 | 1/2 | 6.35 | 4.72 | 42.55 | AABL - 812 | |
| 50 | 6 | 1/4 | 7.92 | 5.89 | 32.64 | AABL - 66 |
| 6 | 5/16 | 7.92 | 5.89 | 32.64 | AALB - 68 | |
| 6 | 3/8 | 7.92 | 5.89 | 32.64 | AABL - 610 | |
| 6 | 1/2 | 7.92 | 5.89 | 42.55 | AABL - 612 | |
| 70 | 4 | 1/4 | 9.04 | 7.14 | 40.64 | AABL - 46 |
| 4 | 5/16 | 9.04 | 7.14 | 40.64 | AABL - 48 | |
| 4 | 3/8 | 9.04 | 7.14 | 40.64 | AABL - 410 | |
| 4 | 1/2 | 9.04 | 7.14 | 40.64 | AABL - 412 | |
| 90 | 2 | 1/4 | 10.67 | 8.43 | 43.94 | AABL - 26 |
| 2 | 5/16 | 10.67 | 8.43 | 43.94 | AABL - 28 | |
| 2 | 3/8 | 10.67 | 8.43 | 43.94 | AABL - 210 | |
| 2 | 1/2 | 10.67 | 8.43 | 43.94 | AABL - 212 | |
| 125 | 1/0 | 1/4 | 12.65 | 10.19 | 48.56 | AABL - 106 |
| 1/0 | 5/16 | 12.65 | 10.19 | 48.56 | AABL - 108 | |
| 1/0 | 3/8 | 12.65 | 10.19 | 48.56 | AABL - 1010 | |
| 1/0 | 1/2 | 12.65 | 10.19 | 48.56 | AABL - 1012 | |
| 150 | 2/0 | 1/4 | 14.22 | 11.58 | 55.88 | AABL - 206 |
| 2/0 | 5/16 | 14.22 | 11.58 | 55.88 | AABL - 208 | |
| 2/0 | 3/8 | 14.22 | 11.58 | 55.88 | AABL - 2010 | |
| 2/0 | 1/2 | 14.22 | 11.58 | 55.88 | AABL - 2012 | |
| 175 | 3/0 | 3/8 | 15.62 | 12.93 | 57.15 | AABL - 3010 |
| 3/0 | 1/2 | 15.62 | 12.93 | 57.15 | AABL - 3012 | |
| 225 | 4/0 | 3/8 | 17.63 | 14.94 | 65.29 | AABL - 4010 |
| 4/0 | 1/2 | 17.63 | 14.94 | 65.29 | AABL - 4012 |
| MATERIALFINISH | -E - COPPER-ELECTRO TINNED |
| Cable Size mm2 | Dimensions in mm | Product Code | ||||||
| A | C | G | L | T | P | W | ||
| 6 | 3 | 4.6 | 2 | 20 | 0.8 | 3 | - | AWB - 6 |
| 10 | 4.4 | 6 | 2 | 25 | 0.8 | 4 | - | AWB - 10 |
| 16 | 5.5 | 7.5 | 2 | 25 | 1 | 5 | 1.5 | AWB - 16 |
| 25 | 7 | 9 | 2 | 30 | 1 | 7 | 1.5 | AWB - 25 |
| 35 | 8 | 10.4 | 2 | 35 | 1.2 | 8 | 1.5 | AWB - 35 |
| 50 | 9.5 | 11.9 | 2 | 40 | 1.2 | 9 | 1.5 | AWB - 50 |
| 70 | 12 | 14.8 | 3 | 45 | 1.4 | 12 | 3 | AWB - 70 |
| 120 | 15.5 | 18.7 | 4 | 55 | 1.6 | 15 | 3 | AWB - 120 |
| 150 | 17 | 20.6 | 4 | 60 | 1.8 | 16 | 3.4 | AWB - 150 |
| 185 | 18.5 | 22.9 | 4 | 65 | 2.2 | 18 | 5 | AWB - 185 |
| 225 | 20.5 | 24.9 | 5 | 75 | 2.2 | 20 | 5 | AWB - 225 |
| 240 | 22 | 26.4 | 5 | 80 | 2.2 | 21 | 5 | AWB - 240 |
| 300 | 24 | 29.6 | 5 | 85 | 2.8 | 23 | 5 | AWB - 300 |
| 400 | 28.5 | 34.7 | 7 | 95 | 3.1 | 27 | 5 | AWB - 400 |
| 500 | 30.5 | 37.5 | 7 | 105 | 3.5 | 30 | 5 | AWB - 500 |
| 625 | 34.5 | 42.5 | 8 | 115 | 4 | 33 | 5 | AWB - 625 |
ACE manufactures a vast range of line taps to meet the materials & dimensional specifications laid by different international standards. Brass line taps are made with high tensile brass as per BS 2874 - CZ 112. Threads are formed by rolling process giving the nut extra clamping force. Pressure pads are made from extruded bars (not cast), preventing the pads from cracking. Brass line taps are manufactured in passivated natural brass with electro tinned finish. They are also supplied in high conductivity copper
| Size (mm2) | A | B | CA/F | DA/F | E | Product Code |
| 6 | 19.85 | 4.00 | 12.70 | 13.35 | 4.80 | AS BC - 6 |
| 10 | 26.75 | 4.70 | 12.70 | 19.00 | 5.60 | AS BC - 10 |
| 16 | 26.00 | 5.70 | 12.70 | 19.00 | 5.60 | AS BC - 16 |
| 25 | 28.00 | 7.30 | 16.00 | 19.00 | 5.60 | AS BC - 25 |
| 35 | 35.00 | 7.80 | 18.50 | 24.00 | 6.35 | AS BC - 35 |
| 50 | 42.00 | 9.70 | 24.10 | 27.20 | 8.65 | AS BC - 50 |
| 70 | 44.50 | 11.50 | 24.10 | 27.20 | 8.65 | AS BC - 70 |
| 95 | 50.00 | 14.40 | 26.50 | 35.40 | 9.40 | AS BC - 95 |
| 120 | 57.50 | 16.20 | 30.00 | 35.40 | 12.00 | AS BC - 120 |
| 120 | 57.50 | 16.20 | 30.00 | 35.40 | 12.00 | AS BC - 150 |
| 185 | 57.50 | 18.20 | 31.75 | 38.00 | 12.00 | AS BC - 185 |
| 240 | 72.50 | 22.00 | 40.00 | 48.20 | 14.25 | AS BC - 240 |
| 300 | 72.50 | 24.00 | 42.00 | 50.00 | 14.25 | AS BC - 300 |
| 400 | 76.50 | 26.00 | 48.00 | 56.00 | 16.00 | AS BC - 400 |
| 500 | 80.00 | 30.00 | 55.00 | 65.00 | 16.00 | AS BC - 500 |
DIN RAIL 15 X 5.5mm THICKNESS 1mm,
SLOTTED (WEIGHT 290 GMS APP.)
& UNSLOTTED (WEIGHT 310 GMS APP.)
2 METRES / 6. 6. LONG ZINC-BICHROMATE
COLD ROLLED ELECTOLITICALLY
PLATED STEEL.
Copper alloy clamps are made from Bronze/Gunmetal/ High Strength Copper Alloy body which give strong resistance to corrosion.
Following are the range of clamps we offer- Fasteners are made from high strength Copper Alloy / Steel / Stainless Steel.
| Size | Max Cond. Size (mm2) | Product Code |
| 5/8”/16 | 35 | ACO - 1 |
| 5/8”/16 | 70 | ACO - 2 |
| 3/4”/20 | 95 | ACO - 3 |
Salient Features-
| Dimension Rod Size (DIA x LENGTH) |
Actual Rod Dia “S” | Thread Dia “T” | Product Code Copper Bonded | Product Code Solid Bonded |
| 9.5 x 1200 (UN - THREADED) |
9.5 | - | ABR - 012 | ACRT - 012 |
| 9.5 x 1800 (UN - THREADED) |
9.5 | - | ABR - 018 | ACRT - 018 |
| 14 x 1200 | 12 | 14 | ABR - 1412 | ACRT - 1412 |
| 14 x 1500 | 12 | 14 | ABR - 1415 | ACRT - 1415 |
| 14 x 1800 | 12 | 14 | ABR - 1418 | ACRT - 1418 |
| 14 x 2000 | 12 | 14 | ABR - 1420 | ACRT - 1420 |
| 14 x 2400 | 12 | 14 | ABR - 1424 | ACRT - 1424 |
| 5/8” x 4’ or 16mm x 1200 | 14.2 | 5/8” | ABR - 112 | ACRT - 112 |
| 5/8” x 5’ or 16mm x 1500 | 14.2 | 5/8” | ABR - 115 | ACRT - 115 |
| 5/8’ x 6’ or 16mm x 1800 | 14.2 | 5/8” | ABR - 118 | ACRT - 118 |
| 5/8” x 8’ or 16mm x 2400 | 14.2 | 5/8” | ABR - 124 | ACRT - 124 |
| 5/8” x 10' or 16mm x 3000 | 14.2 | 5/8” | ABR - 130 | ACRT - 130 |
| 5/8” x 4’ or 16mm x 1200 | 16 | 5/8” | ABR - 312 | ACRT - 312 |
| 5/8” x 5’ or 16mm x 1500 | 16 | 5/8” | ABR - 315 | ACRT - 315 |
| 5/8” x 6’ or 16mm x 1800 | 16 | 5/8” | ABR - 318 | ACRT - 318 |
| 3/4” x 4’ or 19mm x 1200 | 17.2 | 3/4” | ABR - 212 | ACRT - 212 |
| 3/4” x 5' or 19mm x 1500 | 17.2 | 3/4” | ABR - 215 | ACRT - 215 |
| 3/4” x 6’ or 19mm x 1800 | 17.2 | 3/4” | ABR - 218 | ACRT - 218 |
| 3/4” x 8’ or 19mm x 2400 | 17.2 | 3/4” | ABR - 224 | ACRT - 224 |
| 3/4” x 10’ or 19mm x 3000 | 17.2 | 3/4” | ABR - 230 | ACRT - 230 |
| 25mm x 2400 (UN - THREADED) |
25 | - | ABR - 424 | ACRT - 424 |
| 25mm x 3000 (UN - THREADED) |
25 | - | ABR - 430 | ACRT - 430 |
| TypeMaterialSizeFinish | ---- | Plain, SlottedSteel21 x 41, 41 x 41, 3/4 x 1 1/2 Natural Stud, Pre Galvanised Colour Coated etc. | |||
Coupler are made from copper alloy &
counter bored to completely enclose
threads, protecting them from damage
& corrosion.
|
Size |
Product Code |
Product Code AL. BRONZE |
|
14mm |
AC - 14 |
ACA - 14 |
|
5/8” or 16mm |
AC - 16 |
ACA - 16 |
|
3/4” or 19mm |
AC - 19 |
ACA - 19 |
