Cold Storage Doors Door Insulation : High-insulating, C.F.C. free foam, friction bushings. Hinges : Aluminium or stainless steel execution with stainless stud bolt and non. Frame : PVC - coated steel or stainless steel. Frame Insulation : Mineral wool or thermocol. Hinged chill doors are made from PVC -coated steel or stainless steel.
Flanges Safe working pressure : 365 psig (25bar), Suitable for all common refrigerants including R-717 (ammonia), R-22, R-134a, Tongue and Groove type, Available with socket weld connection.
Level Port is a simple device to see actual levels in refrigeration system. It has reflex glass. When liquid is present behind glass, it appears dark. When vapor is present, it is light. The neck is provided long for ease of welding and insulation clearance for low temperature service. To see level clearly in frosting condition, Frost shield may be provided.
Electronic Liquid Level Controller are used to regulate the liquid level in a vessel or a flooded coil. The level controller consists of float chamber and an electronic controller. A level indicator module is also mounted on the controller consisting of LEDs operating in bar graph mode. The indicator display the rising and falling of liquid level inside the float chamber
Evaporative Condensors Require very little space compared to Atmospheric Condensers and can be fitted over the roof top. Wind is not required and can be fitted in any direction. Scaling is reduced to minimum, since plain tubes are used. More efficient than Atmospheric type and shell & Tube Condensers.
Standard Atmospheric Ammonia condensers are made from 50mm NB(2") heavy class ERW Pipes and heavy duty "U" Bends. The size is 12 pipes high x 6 meter (20') long. Condensers are supplied with gas and liquid headers and water sprinkler pipes, water sprinklers are made of Medium class GI, ERW pipes of 50mm NB (2"). The condensers are supplied with Red oxide primer coating.
Recirculation System With Ammonia Pump No need to adjust Expansion Valves, Adoptable to all types of Refrigeration Plants, Protects Compressor by Preventing.
Float switch designed to provide a reliable, electro- mechanical response to liquid level changes. The simple and rugged design ensures long life performance and reliable operation for many usages such as, The design incorporates a mechanical float which will operate in the refrigerant. When the set level is reached an electrical volt free micro switch will be activated.
Strainers Valve are seam welded, and the ends reinforced or capped with seal rings. This construction reduces the possibility of bursting the screen assembly. The end of the screen assembly seats against the flange plate to form a tight seal, thereby preventing dirt from bypassing the strainer screen.
Oil Separators are made from Carbon Steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamleslswelded pipes and above 300 mm. they are made from rolled plates. All oil separators are manufactured and tested as per the following standards.
Vertical Accumulators are made from Carbon Steellow temp. plate shell and carbon steellow temp. steel dished ends. Shells upto 300mm (12") are made from seamlesswelded pipes and above 300 mm, they are made from rolled plates.
Monoblock Vertical Agitators are made from Carbon Steellow temp. plate shell and carbon steellow temp. steel dished ends. Shells upto 300mm (12") are made from seamlesswelded pipes and above 300 mm, they are made from rolled plates. They are simple and rugged in construction, double taper roller bearings at one end reduces noise and given long life to the agitator.
Ammonia And Flourinated Receivers are made from Carbon Steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamlesswelded pipes and above 300 mm, they are made from rolled plates.
lengths965mm (38"), 1550mm (61"), 1675mm (66") and 2007mm (79").
Belt Driven Vertical Agitator The standard diameter of the propeller is 350mm(14") dia and the lengths are 965mm (38"), 1550mm (61"), 1675mm (66") and 2007mm (79"). Monoblock Agitators are made with two number white metal bearings which increase the life of the Agitator.
Reflex Glass Liquid Level is designed for safe & positive visual indication of liquid level in vessels under high pressure & temperature conditions. The liquid chamber is one piece metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid where as the light striking the glass in the vapor portion is reflected making the liquid appear as black. Large chamber for boiling, flashing or surging liquids.
Gurugram, Haryana, India
Verified
Add Review
