Pune, Maharashtra, India
Our Products
We offer the best product range of sugar cane harvester, Tractor Rotavator, Combine Harvester, Heavy Duty Two Wheel Trailer and Heavy Duty Four Wheel Trailer.
Being a Supplier of Sugar Cane Harvester , we continue in the same vein and keep enchanting our customers with our spotless quality. Our company is reputed as trader in the industry and situated in the well-connected area of Pune(India). Present Scenario of Sugar industry in India and Reasons Inconsistency in production of sugar and rates. Sugar production and recovery is less than other countries. Increase in the sugar factories and area of the cane plantation but reduction in the labours. So harvesting by labors has become main problem. Limitations and Effects Due to Labor Scarcityon Sugar Industry No supply of enough cane due to scarcity of labours- resulting in less efficiency. Increase in time of harvesting to crushing- resulting in less recovery Cannot control cane harvesting Cannot recover advances given to the labors – resulting in economical loss. Farmer's Benefits Timely harvesting Yield increase Trash blanketing act as organic manure Fixed harvesting rate No stubble shaving Healthy ratoon crop Farmer will get green top separately for fodder purposes Benefits for the Sugar Mill Consistent supply of cane Supply of more bottom nodes 2- 3 hours cut to crush time Timely and economical harvesting Night Harvesting Maximum output Less unloading time Reduced load on crushing unit Better sugar recovery levels Expand cane acreage Benefits of Mechanical Harvesting Bottom chopping Cut the lodged cane Clean the harvested cane Cut green or unburnt cane No disease/ pest entry due to bottom chopping More cane recovery Better rationing No need of stubble shaving. Social Networking Link You Tube Link 01 : http://www.youtube.com/watch?v=4WslmpArfSk You Tube Link 02 : https://www.youtube.com/watch?v=8XlMsGAMHkk
Restricting to the pre-defined quality parameters, we make sure that the offered array of products is as per the stated norms. Well-established name in the domain, you can count on us for presenting extensive array of Tractor Rotavator . Detail: Sc type tillers are set up with adaptabe mounting brackets – 3 points linkage Depth skid is adjustable from 4" to 7" for all models in standard conditions Sc Type Tilers are furnished with automatic spring loaded adjustable trailling board for smooth finishing Weight of single speed Rotary Tiller is approx 35.37 kgs less than Mutli speed Rotary Tiller. Funcitons in smooth operations and enchancing fuel effeciency and reducing wear & tear of tractors. Weight of Rotary Tiller mentioned abov does not include the weight of PTO (Apx.20 Kgs)
| Model no | RRT - Sc 5 | RRT – SC6 | RRT – Sc7 |
|---|---|---|---|
| Over all width (CM) | 177 | 204 | 227 |
| Working width (Cm) | 147 | 174 | 197 |
| Tractor power (HP) | 45 | 55 | 65 |
| Weight approx (Kg) | 440 | 488 | 518 |
| NO. of flanges | 7 | 8 | 9 |
| No of Blades | 36 | 42 | 48 |
| Gearbox | Single / Multi speed | ||
| Side Drive | Gear drive | ||
A famed name, the company is enlisted amidst the well-known Suppliers of Combine Harvestor. We are immensely recognized for delivering the orders within the stipulated time frame and at desired Pune(India).
We are based in Pune(India) and we have carved a niche for ourselves in the market by offering quality products. Our effective and excellent quality analysis helps us in delivering the best in class range of products.
| Heavy Duty | |
|---|---|
| Lenght | 10 Ft |
| Width | 6.5 ft |
| Height | 1.5 ft |
| Tyre size | 9.0.16 / 1020 |
| Disc | 8 hole / 6 to 8 mm |
| Axel | 80 / 75 mm |
| Bearing size | 32211 & 32213 |
| Side panel | 2.5 mm sheet |
| Capacity | 3 /5 tone |
| Base sheet | 4 /6 Degree |
| Tipping Angle | 45 Degree |
| Chassis | 200 / 100 mm channel |
| Three side turning available | |
Owing to our well-maintained and organized inventory system, we deliver the same in the committed time. Having captured all markets of Pune(India), our company has emerged as an acknowledged provider of this product range.
| MINI TRAILER | |
|---|---|
| Length | 7 Ft |
| Width | 5 Ft |
| Height | 1.25 ft |
| Tyre Size | 6.0.16 |
| Disc | 5 Hole / 3 mm |
| Axel | 65 mm |
| Bearing Size | 30209 & 32211 |
| Slide panel | 2.5 mm sheet |
| Capacity | 2 /3 Tone |
| Base sheet | 3 mm |
| Tripping Angle | 45 Degree |
| Chassis | 125 / 65 Chanel |
| Three Slide Turning available | |
Designed and developed with perfection, our products are of unmatched standards. We are a leading name offering the best in class and qualitative array of Baler and Rakes. You Tube Link : http://www.youtube.com/watch?v=w6DEEQc8Sys
We give maximum importance to the quality of the products Tractor Cultivator(5 in 1 implement) that we offer and thus conduct diverse quality tests. We are staffed with diligent and efficient logistics team; they act as a helping hand to make deliveries within set time.
| Length | 3 to 6 Ft |
|---|---|
| Height | 300 to 375 mm |
| Weight | 275 kgs |
| Tine | 5 to 7 |
| Tine - Distance | Adjustable |
| Razor Distance | Adustable |
Procurement of the product from us is profitable, as we can provide it in wholesale any time of the year and ensure delivery is done on the postulated time. We are one of the esteemed names in the market situated in Pune(India) and offering the best deals. Cage wheels are effective implement for tractors to meet the challenges encountered in the wet field.Best suitable for puddling operations. Features : Decrease load on tiller Helps to improve traction performance Easy to fit Cage wheel with float is provided
| Outer Diameter | 690 mm |
|---|---|
| Ring type | Solid bar (10 mm) |
| Inner Diameter | 220 mm (thick flat circle) |
| Number of Lugs | 24 Angle type |
| Dimensions of Lug | (l x w x t) (170 x 30 x 3)mm |
| No of fitting hole | 9 |
Reckoned for the exceptional Post Hole Digger ; we are a trustworthy Supplier in this domain. Working in close coordination with the genuine logisticians, we dispatch the products in the dedicated time. The post hole digger is basically tractor drawn implement mounted on the 3 linkage of the tractor.It is driven by tractor P.T.O. It helps for digging holes for plantation, polo standing etc. Features : Hole digger is equipment, which can dril / dig holes of various sizes and depths in soil. Hole Digger is used to make pits for plantation of mango, coconut, teak, pomegrante, lemon, phyllanthus embolic & Sugercane etc. Tractor PTO of 540 RPM mechanically drives hole digger Augur. Hole Digger consists of a stabilizer system, which keeps the augur perpendicular to the ground while in operation and controls Swinging of augur while moving form one point to another point. Hole Digger Augur end points and the bending blades are made replaceable. Hole Digger Gearbox , power Transmission, Shaft and spirals are most important. Heavy duty Tubular Frame Special steel grade cast cutting tip with semi- double flighting. It has heavy duty gear box with output shaft with shear pin protection. Hole digger is availabe in two models. Hole digger suitable for 18 HP to 75 HP, with 540 PTO RPM 12", 18", 24", 36" , hole dia. Augurs. Hole Digger suitable for 50 HP to 75 Hp, with 540 PRO RPM 18 ", 24", Inch augur with 3 ft to 9 ft.Depth for commerical purpose.
| Frame | Heavy Duty seamless tubular |
|---|---|
| Hitch | Category 1 & Category II |
| Gearbox | Compatible with 50 Hp max. |
| Output shaft | 55 mm |
| Inputrpm | 540 |
| Fasteners | High tensile |
| Protection device | Shear pin |
| Auger length | 1000 mm |
| Auger sizes | 12". 18", 24", 36" |
| Auger Blade | With carbide bits (Replaceable) |
| Auger point | Replaceable |
| Accessories | Storage stand |
| Approx weight | 300 kg with 450 x 900 mm auger |
Our products are manufactured under the guidance and supervision of quality experts as we make sure that they remain defect free. Buyers can place bulk or retail orders with us all year round and expect on time delivery of consignments. Distance between two furrow : 7 Tine : 12 Inch 8 Tine: 10 Inch 9 Tine : 9 Inch Cultivator Furrow : 9 Inch As the name implies, this equipment can efficiently accomplish the tasks of both seeding & Fertilization. It also makes these exercises quite easier dure tofixed & Strong chair. Lenght : 1025 mm Width : 1830 mm Height : 540 mm Distance Between : 2 Tines 215 mm Weight : 260 Kgs
We are situated in Pune(India) and our well-developed network assists us in meeting the exact requirements of the clients. We ensure on time distribution of wholesale as well as retail consignments owing to an extensive vendor, distributor and logistic facility base. Surya two furrow Surry rider is useful for making deep furrow opening and ridges prior to planting / sowing operations. Specially useful for sugarcane.Potato plantation.It can also be used for making small channels for irrigation.
One stop destination for the best in class and exceptional assortment of Double Furrow Reversible Plough ; we are a reliable Supplier amidst the customers. We promise to deliver the orders within the postulated time frame as we are backed by excellent logistics facility.
| Length | 1830 mm |
|---|---|
| Width | 1245 mm |
| Height | 1245 mm |
| Working width | 800 mm |
| Weight | 350 kgs |
Supported by an advanced transit system, we have become capable of delivering the orders within promised time. A famed name, the company is enlisted amidst the well-known Suppliers of Farm Preparation Tractor.
In order to deliver the orders on time, we have backed ourselves with advanced logistics facilities. Owing to immense experience in this domain, we became efficient in providing quality Heavy Duty Water Tanker . Details : High quality steel & paint. Light weight saves diesel and no load on Tractor Rust Resistance & Longer life Availabe in a variety of colors.
| 2 Wheels | 4 Wheels | |
|---|---|---|
| Length | 10 ft | 12 ft |
| Width | 6 ft | 6 ft |
| Tyre size | 9 x 16 / 1000.20 | |
| Disc | 8 hole – 6 to 8 mm | |
| Chases | 200 / 100 chanal | |
| Tank sheet | 3.15 mm | 3,15 mm |
| Capacity | 3000 to 6000 ltr | 6000 to 8000 ltr. |
As a respectable firm, headquartered in Pune(India), we are making available top-of-the-line quality products in the market. Seeking a trusted Single Furrow Reversible Plough supplier? Our organization is the best one and able to fulfill wholesale orders.
| Model | 18 HP | 50 HP |
| Length | 980 mm | 1270 mm |
| Width | 950 mm | 1360 mm |
| Height | 650 mm | 970 mm |
| Working width | 220 mm | 380 mm |
| Depth of the Furrow | 230 mm | 355 mm |
| Row width make in furrow | 610 mm | 990 mm |
| Weight | 96 kg | 245 kgs |
· Inconsistency in production of sugar and rates. · Sugar production and recovery is less than other countries. · Increase in the sugar factories and area of the cane plantation but reduction in the labours. · So harvesting by labors has become main problem.
Designed and developed with perfection, our products are of unmatched standards. We are a leading name offering the best in class and qualitative array of Baler and Rakes. You Tube Link : http:www.youtube.comwatch?v=w6DEEQc8Sys
Designed and developed with perfection, our products are of unmatched standards. We are a leading name offering the best in class and qualitative array of Baler and Rakes. You Tube Link : http:www.youtube.comwatch?v=w6DEEQc8Sys
Reversible Plough
Get Best Quote
