• Features‧Aquaculture water supply and drainage Aquiculture irrigation ‧Underground water pump
• HP1.5 / 2 /3 / 5 / 7.5
• Caliber(Inch)2"/3"/4"/5"

VCT weather proof cable Auto-cut to prevent motor burning Abrasion resistance Double seal to prevent leakage Water cooling motor to ensure long Operation High efficiency Low engergy comsuption

• Caliber(Inch)2" / 3" / 4" / 6"
• HEAD(m)4.5 - 24
• Capacity (m3/min.)0.21 - 1.0

International standard design : VCT cable, auto-cut, 　silicon carbide mechanical seal, high grade cast iron. Multiple impellers to handle different sewage and 　waste water Strong abrasion-resistant mechanical seal made of 　silicon carbide to ensure best seal effect Full range from low head to high head, compact and 　easy installation, guide rail system available Drainage of waste form the liberating tank, purifier tank and sewage tank in water treatment plant.

• Voltage220
• MAX JETTING DISTANCE12M
• Capacity120,150,120,180

Japan made Autoamtic Timer is extremely sensitive and �accurate. �It sprays feed automatically, therefore no tedance �required. Single roller distributer can adjust feeding quantity at will, � simple and handy. High power blower blows far and covers wide area. Air-tight motor and roller feed supplier are stable and �reliable. Stainless steel made outer case is weather proof and �durable. 3Φ also available upon request.

Wide range for air volume, pressure and vacuum. Easy access for eminence and long bearing life. The inlet and outlet are equipped with built-in silencers to ensure a low noise level. Driven by a 2-pole TEFC motor with IP54 protection and class F insulation. Pressure relief valve can be mounted directly on the outlet and vacuum relief valve and air filter directly on the inlet to avoid overload of the motor.

• 　　Bore :25A - 350A
• 　　Capacity :0.1-250 m3/min.
• 　　Pressure :0 - 8000mmAq

Three-lobe design is low in pressure plus and significantly reduces noise by approximately 5dB.Bearing life is 20% longer due to that less vibration is transmitted through the lobes and gear as well as bearing are lubricated with engine oil.Stable air flow and less pressure variation Simple and strong construction for minimum eminence.

• Brackets :Injection moulded PE plastic brackets
• Ring:2 rings

Easy installation. Cost Saving. Low maintenance cost. Corrosion resistant design. HDPE (High Density Polyethylene) materials adopt. Strict quality control. Simply & efficient harvest. Sturdy quality of "Injection-Moulded" HDPE 80 Bracket offer. Floating Pipe made of HDPE 80 give safe & stable working environment. "Round" and "Square" share are available.

• Features‧Aquaculture water supply and drainage Aquiculture irrigation ‧Underground water pump
• HP1.5 / 2 /3 / 5 / 7.5
• Caliber(Inch)2"/3"/4"/5"

VCT weather proof cable Auto-cut to prevent motor burning Abrasion resistance Double seal to prevent leakage Water cooling motor to ensure long Operation High efficiency Low engergy comsuption

• Caliber(Inch)2" / 3" / 4" / 6"
• HEAD(m)4.5 - 24
• Capacity (m3/min.)0.21 - 1.0

International standard design : VCT cable, auto-cut, 　silicon carbide mechanical seal, high grade cast iron. Multiple impellers to handle different sewage and 　waste water Strong abrasion-resistant mechanical seal made of 　silicon carbide to ensure best seal effect Full range from low head to high head, compact and 　easy installation, guide rail system available Drainage of waste form the liberating tank, purifier tank and sewage tank in water treatment plant.

• Voltage220
• MAX JETTING DISTANCE12M
• Capacity120,150,120,180

Japan made Autoamtic Timer is extremely sensitive and �accurate. �It sprays feed automatically, therefore no tedance �required. Single roller distributer can adjust feeding quantity at will, � simple and handy. High power blower blows far and covers wide area. Air-tight motor and roller feed supplier are stable and �reliable. Stainless steel made outer case is weather proof and �durable. 3Φ also available upon request.

Wide range for air volume, pressure and vacuum. Easy access for eminence and long bearing life. The inlet and outlet are equipped with built-in silencers to ensure a low noise level. Driven by a 2-pole TEFC motor with IP54 protection and class F insulation. Pressure relief valve can be mounted directly on the outlet and vacuum relief valve and air filter directly on the inlet to avoid overload of the motor.

• 　　Bore :25A - 350A
• 　　Capacity :0.1-250 m3/min.
• 　　Pressure :0 - 8000mmAq

Three-lobe design is low in pressure plus and significantly reduces noise by approximately 5dB.Bearing life is 20% longer due to that less vibration is transmitted through the lobes and gear as well as bearing are lubricated with engine oil.Stable air flow and less pressure variation Simple and strong construction for minimum eminence.

• Brackets :Injection moulded PE plastic brackets
• Ring:2 rings

Easy installation. Cost Saving. Low maintenance cost. Corrosion resistant design. HDPE (High Density Polyethylene) materials adopt. Strict quality control. Simply & efficient harvest. Sturdy quality of "Injection-Moulded" HDPE 80 Bracket offer. Floating Pipe made of HDPE 80 give safe & stable working environment. "Round" and "Square" share are available.