Other Products / Services #4073157

Our products are kept under safe conditions in our well-maintained warehouse. The facility is installed with all required amenities and supervised by experts for safe storage. Enlisted amidst the renowned Suppliers of Low Voltage Switchgear, we cater to varied demand of the customers in this sphere. Our Low Voltage Switchgear is made of the stainless steel with a black rubber gasket sealing.

Our investment in the well-structured warehouse has paid off well. We have successfully installed up-to-the-minute warehouse management software to keep the entire lot in a safe and organized manner. Since, we have a widespread supply chain network; we can satisfy buyers by catering to bulk requirements and making delivery within the stipulated time. Our Power Control Center Panel provides output voltage varying from 12-48 V.

We are based in Nashik(India) and known for providing amazing deals and lucrative offers to the clients. As a trusted name, we strictly follow all quality measures and cross check every product at different stages. The offered Solar Inverters require input voltage 12V.

Keeping in-line with the globally accepted standards, the raw material used for production is of high-grade. Thus, we always keep a check on the final product to make sure that the same is defect free. We carry out the quality examinations only under the vigil supervision of the quality auditors.

Simulation panel for Differential protection of Transformer :

• Transformer : 1 KVA , 415 V /230V , Star-Delta , 50Hz., 3 Phase
• Meterings : Various Digital meters are provided as follows.
• Voltmeter 01 No. on I/P & O/P side with selector switch.
• II. Ammeter 01 No. each on I/P & O/P side for balance condition.
• Panel with Accessories : Necessary meters as mentioned above, various MCB`s , including lamps, contactors, relays, CT`s, on I/P & O/P side along with protection scheme components are mounted on a proper panel with necessary wiring.
• Numerical High Speed Differential Relay : (For Differential Protection)

Technical Specifications :

• Aux. Supply : 230VAC.
• CT Inputs : Suitable for CT secondary 1.0 Amp or 5.0 Amp.
• Operating Current : 10% - 100% adjustable. In steps of 5%
• Bias : Bias setting adjustable by switch at : 10 - 50%. In steps of 5%
• 2nd Harmonics Restrain : 10% to 80 % settable
• High Set setting : 100% to 2000% in steps of 100%
• Thermal Ratings : 5 x Times of Rated current continuously. (N = Rated) 40 x Times of Rated current for 3 sec.
• Vector group selectable for HV and LV side.
• Operating time : Less then 30ms at 5 Times of rated
• Burden on CTs : Less than 0.2VA.
• Burden on Aux. Supply : Less than 10VA on any supply.
• Thermal Withstand Capacity : x40 times the normal current for 3sec. : x2 Continuous

• Contact Rating for Trip Contract :
  • Make and carry for continuous – 5A
  • Make and carry for 0.5 sec. – 30A
  • Make and Carry for 3 sec . – 15A.

Our well-structured warehouse is properly maintained and installed with diverse amenities required for the safe storage of the products. Moreover, we keep on updating the unit for enhanced safety. We have uncompromised quality rules when it comes to packaging. We make sure the products are properly packed for shipping/ handling, as well as they have smudge-proof labels. We are offering Solar Switchgear Panel featuring rated voltage 3KV -12KV.

To keep up with the set international standards, we have incorporated the latest machines and cutting-edge technology to sternly examine the material used for production. We have installed all the requisite amenities, necessary for making safe side deliveries.

High Voltage Breakdown Tester AC Set: (Classic Model)

• Input : 230V AC, 50Hz.
• Output : 0-100 kV AC @ 100mA, One side grounded- 50% duty cycle.
• Oil Cooled Type, Transformer enclosed in MS Enclosure duly powder coated with wheels at bottom. High voltage lead taken out through high voltage bushing at top.
• Control Panel for above : A powder coated control panel with necessary meters to read different parameters such as input voltage, output voltage, leakage current, current limiting resistor.

Our payment terms are clear and the methods we use are practical. New customers can connect with us any time for further payment related queries and learn about our policies. We use superior-grade packaging as barrier protection for our products against dust, moisture, mechanical damages and logistical jostling. Our products packaging is premium.

Simulation model for protection schemes for of alternator:

• Motor- Generator (Alternator) Set : DC Shunt motor 3 HP, 220V, 1500 RPM, type SPDP, self fan cooled, cont. rated coupled to Alternator 2 KVA, 3 phase, 4 wire, 400/440V, 1500 RPM, type SPDP, self fan cooled, separately excited .cont. rated Mounted on a common base plate.

• Various Protective relays as under : (Microcontrolled/ Microprocessor based)
  • Definite time overcurrent relay.
  • Under Over Freqneucy protection relay.
  • Negative Phase Sequence Relay.
  • Reverse Power Relay.
  • Earth fault relay.
  • The above relay will be a composite or separate relays.

• Testing Panel :
  • Input : 1 Ph, 230V AC, 50 Hz.
  • 2 Pole MCB for input side.
  • DC motor drive for DC Shunt motor.
  • Aux. supply for relays.
  • Fault simulation facility.
  • ON/OFF switches/ MCB.
  • Accessories : Indicating lamps, Digital Ammeter, Voltmeter, AC and DC side, etc
  • Lamp Load Bank.

• Construction : All the above components will be fitted in an MS enclosure duly powder coated with self standing facility. All the components will be duly labeled. With insulated termination for external connections of relay and test set for study use.

Our products are formed under the supervisor of experienced quality control managers utilizing only premium materials and the latest technologies. Owing to our reliable transportation facilities, we are able to deliver the orders at the desired destination and on promised time.

Oil testing kit is equipment designed to test dielectric strength of Insulating oils as per reference standard IS 6792/1992 or IEC 156.

Specification:

• Model : Motorized Model.
• Input : 230V/ 240V, single phase, 50 C/s AC.
• Output : 0- 60 KV center tap earthed.
• Indication : Mains ON & HT ON lamps.
• Metering : Analog Voltmeter duly marked in KV.
• Protection : Electronic, fast action over current tripping device sensing HT current directly.

Our organization stocks the items in mass. Therefore, we can serve mass/ retail requirements without hassle and make sure delivery of products is swift. Well-established as a notable name, we cater to the demands of customers from Nashik(India) to every nook and corner.

Specifications :

Three Pole, 415V AC, 400 to 800A, Manual Fixed type, with thermal magnetic release Protection, 50kA, having 4 aux. Contact, with open view model, Model can be new or used. Confirming to IS/IEC 60947-2 & IEC 60947-2.

Make : Suvidhi.

We have a strong security system that helps us to make online transactions possible without getting worried about the security. You need to share your details with us and we make sure that the details are kept confidential. The raw material that is used for manufacturing superior grade products is sourced from the reliable places after complete quality confirmation.

Simulation model for protection schemes for 3 Phase Induction Motor:

• 3 Phase Induction Motor : 1 HP, 3 Phase, 1440 RPM, 50Hz, 415V, AC Mounted on base
• with mechanical loading arrangement mainly consist of Motor base Plate, Load adjustment
• screw, belt, pulley.

• Various Protective relays as under : (Microcontrolled/ Microprocessor based)
  • Definite time overcurrent relay.
  • Over heating protection relay or Thermal Protection relay.
  • Single Phase Preventer.
  • Under/ Over Voltage Relay.
  • The above relay will be a composite or separate relays.

• Testing Panel :
  • Input : 3 Ph, 230V AC.
  • 3 Pole MCB for input side.
  • DOL Starter.
  • Aux. supply for relays.
  • Fault simulation facility.
  • ON/OFF switches/ MCB.
  • Accessories: Indicating lamps, Digital Ammeter, Voltmeter, AC and DC.

• Construction : All the above components will be fitted in an MS enclosure duly powder coated with self standing facility. All the components will be duly labeled. With insulated termination for external connections of relay and test set for study use.

Owing to our renowned name, we are considered as one of the trusted Suppliers of Horn Gap Assembly. Capitalizing on an efficient industrial network, our organization has made coalitions with numerous reputed logistics solution sources. Thus, we can ensure on time distribution of consignments. The offered Horn Gap Assembly has a gap-range between two horns is 5mm to 50mm.