Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

SE

SVS Embedded
location Boduppal, Hyderabad, Telangana

Write a Review
Call Now Call Now

Our Products

  1. Electric Circuit Components & Parts 5 Products available
  2. Sensors 3 Products available

  3. Ethernet Device

    1 Products available

  4. Podium

    1 Products available

  5. LED Bulb

    1 Products available

  6. Thyristor

    1 Products available

  7. Modems

    1 Products available

  8. Integrated Circuit

    1 Products available

  9. Audio Recorders, Mixers & Transmitters

    1 Products available

  10. Ladies Leggings

    1 Products available
  11. Others Products 16 Products available

Our Products

Our offered Product range includes ETHERNET WEB SERVER KIT, ATMEGA32 Development Board, SOIL MOISTURE SENSOR MODULE, AT89S52 DEVELOPEMENT BOARD and MAX232 BOARD.

RF-434 Transmitter

RF-434 Transmitter
This RF transmitter with 4 switches and RF receiver contains connector to connect any of the devices which can be controlled wirelessly.Features Transmitter operating range up to 50 meters with LED indicationOn Board 5V Operated TransmitterReceiver Indicates output status by LEDReceiver operates from 12V AC or DC power supply TransmitterThis is RF transmitter operating at 433 MHz frequency. It contains four switches. When a switch is pressed, it transmits encoded signal to remote control receiver which decodes the signal and controls any device.Features 433 MHz operation FrequencyOnboard AntennaActive Data Transmission Indication LEDRange 100 Meters
Ask Latest Price & Details
ETHERNET WEB SERVER KIT

ETHERNET WEB SERVER KIT

his board is an embedded AVR Web server. It is based on ATMEGA32 and ENC28J60 chipset. It can serve webpage as well as can be controlled from a PC Application. It has onboard temperature sensor, ADC Preset and two LEDs to quick start using the board. We provide full microcontroller Source code, PC application source code and board schematic for further development based on Ethernet. The AVR Web server is based on ATmega32 and ENC28J60 Ethernet interface controller. With some source code modification this product can be used as data logger. We offer following in package AVR Web server based on ATMEGA32 + ENC28J60Ethernet Cable CDROM containingFull AVR Source Code + HEXFull PC Application Source Code + EXE AppBoard SchematicIC DatasheetsWinAVR AVR Studio to recompile AVR Source Code
Ask Latest Price & Details
ATMEGA32 Development Board

ATMEGA32 Development Board

Features of AVR ATMEGA32 Starter Kit: AVR ATMEGA32 40 PIN DIP, ON BOARD RTC 1307, ON BOARD ADC, LM35, 16 X 2 ALPHANUMERIC LCD, ON BOARD EEPROM 24CXX, MAX232 FOR RS232 SERIAL PORT COMMUNICATION, 10 PIN IN-SYSTEM PROGRAMMING (ISP) CONNECTOR, MAX232 FOR RS232 SERIAL PORT COMMUNICATION, 10 PIN IN-SYSTEM PROGRAMMING (ISP) CONNECTOR, 4 PUSH PULL SWITCHES, 1-BC547 TRANSISTORS.
Ask Latest Price & Details
SOIL MOISTURE SENSOR MODULE

SOIL MOISTURE SENSOR MODULE
The sensor measures the dielectric constant of the soil in order to find its volumetric water content (VWC). It obtains volumetric water content by measuring the dielectric constant of the media through the utilization of capacitancefrequency domain technology. Since the dielectric constant of water is much higher than that of air or soil minerals, the dielectric constant of the soil is a sensitive measure of volumetric water content.The sensor has a low power requirement and very high resolution. This gives the ability to make many measurements (i.e. hourly) over a long period of time with minimal battery usage. In addition, the sensors incorporate a high frequency oscillation, which allows the sensor to accurately measure soil moisture in any soil with minimal salinity and textural effects. An on-board voltage regulator allows factory calibrations to be used with any excitation voltage above 3V.Applications: Irrigation schedulingVadose zone monitoringPlant-soil-water interaction studies
Ask Latest Price & Details
GPS Modem

GPS Modem
RASTA-634R is a highly integrated smart GPS module with a ceramic GPS patch antenna. The antenna is connected to the module via an LNA. The module is with 51 channel acquisition engine and 14 channel track engine, which be capable of receiving signals from up to 65 GPS satellites and transferring them into the precise position and timing information that can be read over either UART port or RS232 serial port. Small size and high-end GPS functionality are at low power consumption, Both of the LVTTL-level and RS232 signal interface are provided on the interface connector, supply voltage of 3.6V6.0V is supported. The smart GPS antenna module is available as an off-the-shelf component, 100% tested. The smart GPS antenna module can be offered for OEM applications with the versatile adaptation in form and connection. Additionally, the antenna can be tuned to the final systems circumstances. 65 CHANNEL GPS MODULE WITH CONNORECTThis is the gps module which we can directly connect to any microcontrollers serial communication pins. in the above 6 wires 1, 2 are gnd and vcc (5v)and the last wire yellow colored one we can connect to microcontrollerprocessors Rx pin (EX:10th pin in 8051)
View Complete Details
Ask Latest Price & Details
AT89S52 DEVELOPEMENT BOARD

AT89S52 DEVELOPEMENT BOARD

Features of ATMEL AT89S52 Starter Kit: AT89S52 40 PIN DIP16 X 2 ALPHANUMERIC LCDON BOARD RTC 1307ON BOARD EEPROM 24CXXON BOARD ADC, MAX232 FOR RS232 SERIAL PORT COMMUNICATION10 PIN IN-SYSTEM PROGRAMMING (ISP) CONNECTOR4 PUSH PULL SWITCHES2-BC547 TRANSISTORS.MCP3201 ADCUL2003 FOR STEPPER MOTDC MOTORL293 FOR ROBOTIC APPLICATIONON BOARD REGULATED POWER SUPPLYRESET SWITCH11.0592 MHZ CRYSTAL BELOW IC
Ask Latest Price & Details
MAX232 BOARD

MAX232 BOARD

This board converts 5V level UART TTL signals from microcontrollers to RS232 signal levels of +12V-12V required for connection to standard serial port of PC or RS232 devices.
Ask Latest Price & Details
ETHERNET ENC28J60 MODULE

ETHERNET ENC28J60 MODULE
The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. This Ethernet Module is simplest way to add LAN connectivity to your microcontroller board Use this module to enable Ethernet interface for your projectproduct. It works with any microcontroller operating at 3.3V or 5V. This module works at 3.3V and is compatible with 5V interface lines. Use SPI process to interface with it. Host web server, ping the module or add it to home automation via internet. Heart of this module is ENC28J60 Ethernet controller from Microchip. Use of RJ45 with Integrated magnetic has made it possible to reduce the size of board. ENC28J60 Ethernet chips, SOP28 packageSPI Interface1x10 connector, can be easily mounted with the MCUBuilt-in isolation transformer RJ45 connectors HR911102APower LEDSingle Supply: +3.3 V25Mhz CrystalPCB size: 55x36 mm
View Complete Details
Ask Latest Price & Details
LPC2148 Development Board

LPC2148 Development Board

ARM7 Development Board is a powerful platform which comes with a micro controller on-chip memory. These boards are ideal for developing embedded applications like high speed wireless communication, real time data monitoring and control, interactive control panels and USB based data logging. Manufactured from double sided PTC and PCB material, these boards provide extra strength to the connector joints for increased reliability. ARM Seven Development Board can support the operating supply voltage ranging from 9V to 15V and comes with a built-in reverse polarity protection. ARM7 LPC2148 development board and also projects support board. Microcontroller: LPC2148 with 512K on chip memoryCrystal for LPC2148: 12MhzCrystal for RTC: 32.768KHz40 pin Berg header for external interfacingOperating Supply: 9V to 15V DCAC2.4GHz ZigBee (XBee) wireless module adaptor512 bytes of I2C external EEPROMUSB Type B Connector2x16 Character Alphanumeric LCDL293D 600mA Dual DC motor Driver
View Complete Details
Ask Latest Price & Details
WI-FI UART MODULE

WI-FI UART MODULE
We are one of the leading suppliers and traders of UART To Wi Fi Module. Our range of product-line is a complete ultra low power embedded TCPIP solution. These are manufactured using high-grade raw materials and are procured from trusted vendors and are provided after in-depth research regarding the market trends and clients demands. Following are the main functions of the product-line offered by our organization: Support for UART data serial, four baud rate options: 19200 38400 57600 115200bps.Wireless data rates support the 802.11b Standard, the maximum rate is 11Mbps.Integrate the functions of 802.11 MAC protocol Softwares.Support for the STA appliances in the Infrastructure Network.Support for the OpenWEP mode authentication.Support for the wep64wep128ccmpwpi data encryption transmission in the shared key modeSupport for the automatic networking mode and manual networking mode.In the automatic networking modethe module can automatically scan the target network, and automatically connect when disconnection.In the manual networking modeoperation of connect and disconnect is touched off by orderthis supports a flexible control space.Support the network data transmission in RAWUDPTCP format.Support seven groups of the basic parameters set, and can connect to seven target networks the most.Support to Con fig. the parameters through user serial.Support to upgrade the fire-ware on line by the Internet.
View Complete Details
Ask Latest Price & Details
TRIAC CKT-Thyristor BT136

TRIAC CKT-Thyristor BT136
Description: Average power dissipation 0.5wCurrent rating 4aTRIAC type sensitive gateVoltage rated 600vIGT 25ma This simple triac dimmer can be used to control incandescent filament lamps up to 200W. The circuit operates on the phase-control principle.This light dimmer is directly connected to mains. So be careful. TRIAC:TRIAC (BT136)Integrated Circuit:IC1 MOC3021 (OPTO-COUPLER)Miscellaneous;220v bulb as load, PCB or Breadboard, Flexible Wire, Soldering rod etc.
Ask Latest Price & Details
LED Bulbs

LED Bulbs
Renesola retrofit LED bulbs with high luminous efficacy & unique coolingtechnology for better heat dissipation.Environment friendly, High Power Factor and High CRI.BIS Certified (R-41017973)
Ask Latest Price & Details
GSM SIM 300 MODULE

GSM SIM 300 MODULE
We have with us excellent quality GSM Modem Sim300 which comprises of a on board SMA connector with 3db antenna. This product is specifically fabricated by the professionals as per the strict industrial guidelines. Owing to their reliable performance and longer usage life, our product is highly reckon in the market. Specifications of these GSM Modem Sim300 are as follows : On board ACDC with 12 VDC - extracted pin outNetwork led - visual indication for GSMOn board antenna SMA connector with 3 db antenna
Ask Latest Price & Details
Sensor Board

Sensor Board

THIS BOARD INCLUDES LM324 BASED 1.LM35, MQ2, GAS, FIRE, LDR.ALL OP ARE DIRECTLY IN THE FORM OF DIGITAL WE CAN DIRECTLY GIVE TO THE UC.
Ask Latest Price & Details
APR33A3 VOICE INTEGRATED CIRCUITS

APR33A3 VOICE INTEGRATED CIRCUITS
APR 9600 SIMILAR FUNCTIONSOperating Volatge : 3V 6.5VSingle Chip, High Quality Audio Voice Recording And Playback SolutionNo External IC RequireMinimum External ComponentsProgramming And Development System Not RequiredPowerful 16 - Bit Digital Audio ProcessorNon Volatile Flash Memory TechnologyNo Battery Back Up RequiredExternal Reset PINVery Law Standby Current - 1uALow Power Down Current - 15uASupports Power Down Mode For Power SavingBuilt In Audio Recording Microphone AmplifireNo External OPAMP Or BJT RequiredConfigurable Analog InterfaceDifferential Ended - MIC Pre - Amp FOr Low NoiceHigh Quality Line ReceiverHigh Quality Analog To Digital And PWM Module - Resolution Upto 16 - BitsAvarage 1, 2, 4, 8 Messages Recording Facility
Ask Latest Price & Details
Finger Print Module

Finger Print Module

The fingerprint sensor can read different fingerprints and store in its own flash memory. The sensor can perform three functions namely Add(Enroll) , Empty Database or Search Database and return the ID of stored fingerprint. Any of three functions can be called simply by making the pin low of the sensor or pressing onboard three switches. The response is either error or ok which is indicated by onboard LED. The response is also returned as single serial data byte. The return byte is a valid ID or error code. The response byte is a single byte at 9600 bps thus making whole sensor very easy to use. We have provided indicating LEDs and function switch already so its ready to use when you receive it. Just give power and start using the sensor using onboard switches. Then you can move on making external application using these functions. And also we will provide the sample source code For interfacing.Schematics and Application examples in KEIL provided in the documentation CD 0P-69 FINGER PRINT SENSORDB9 Serial CableSFGDemoV2.0-SOFTWAREALL WE ARE PROVING ON CD
View Complete Details
Ask Latest Price & Details
IR INTRUDER CKT Phototransistor Pair

IR INTRUDER CKT Phototransistor Pair
IR INTRUDER CKT: Infrared LED & Phototransistor Pair 5mm Pair of Infrared LED and Photo diode tuned to IR wavelength IR Transmitter & Receiver PairUse this 5 mm ir transmitter and receiver pair to build object sensors, color sensors, linesensors, distance sensors, etc. Both the transmitter and receiver are built to work on the940 nm wavelength. Note: the transparent led is transmitter while the dark blue one is the receiver.transistor
Ask Latest Price & Details
MEMS SENSOR

MEMS SENSOR
1. On-board MMA7361 (replace MMA7260) low cost micro capacitive accelerometer;2. Support 5 V 3.3 V voltage input, on-board RT9161, more than 1117 of the low pressure drop, faster load, very suitable for high speed corresponding noise power environment;3. Range through the single-chip microcomputer IO choice, also can choose resistance;4. Commonly used pins have drawn into standard needle, for 100 (2.54 mm), mil-convenient for bitmap board;5. Dormancy can make by single chip IO control;6. PCB board double-sided gold-plated, size: 27.9 (mm) x16.8 (mm)7. After purchase principle chart, test program attached and related material can be supply. Package Included:1 x MMA7361 Accelerometer tilt Sensor Module
Ask Latest Price & Details
4-RELAY CKT BOARD

4-RELAY CKT BOARD
The board has four relays driven by ULN2003 IC. The board works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch variety of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by individual LEDs. We are offering our valuable clients a highly durable and precision engineered range of PCB (RELAY-4-A) that offer excellent performance and durability. Offered at highly competitive prices that can be customized as per clients needs, this product is fabricated using advanced technology and quality proved material. Its fabrication according to the international quality standards ensures its reliability.Specifications: 12v DCULN 2003 driver provisionLEDs for output indicationsDiodes preventing back emf
Ask Latest Price & Details
DTMF DECODER MODULE

DTMF DECODER MODULE
This board decodes DTMF signal either from an audio source or phone line to 4 bit binary TTL(5V) level output. It also indicates outputs with LED. Can use directly with microcontrollers to develop various DTMF related applications like remote monitoring, remote control, Caller ID, Auto Dialer.Features Decodes DTMF as 4 bit binaryTTL level output for direct connection to microcontrollers Low power 5V DC operation LED indication of outputs Simple to use Based on excellent HT9170 IC Applications Remote Control systems Caller ID applications FM receiver based remote control Remote control using Mobile phone
Ask Latest Price & Details
IR OBSTACLE SENSOR

IR OBSTACLE SENSOR
Digital output on detecting obstacle in narrow view angle.Features Modulated IR transmitterAmbient light protected IR receiver3 pin easy interface connectorsUp to 6cm range for white object Applications Proximity SensorObstacle Detector SensorLine Follower SensorWall Follower SensorACCIDENT ALERT
Ask Latest Price & Details
Obstacle Sensor

Obstacle Sensor
Digital output on detecting obstacle in narrow view angle. Features Modulated IR transmitterAmbient light protected IR receiver3 pin easy interface connectorsUp to 6cm range for white objectApplications Proximity SensorObstacle Detector SensorLine Follower SensorWall Follower SensorACCIDENT ALERT
Ask Latest Price & Details
2-RELAY CKT BOARD

2-RELAY CKT BOARD
We are offering our valuable clients a highly durable and precision engineered range of PCB (RELAY-2-A) that offer excellent performance and durability. Offered at highly competitive prices that can be customized as per clients needs, this product is fabricated using advanced technology and quality proved material. Its fabrication according to the international quality standards ensures its reliability.Specifications: V-In 12v DCBC547 driver provisionLEDs for output indicationsDiodes preventing back emf
Ask Latest Price & Details
Robot Base Platforms

Robot Base Platforms

We have ROBOT BASES FOR ENGINEERING STUDENT PURPOSEWE WILL DESIGN THE ROBOT BASES AS PER REQUIREMENT
Ask Latest Price & Details
GLCD TOUCHSCREEN MODULE

GLCD TOUCHSCREEN MODULE

INTRODUCTION:If you intend to use the touch panel you should first consider these 2 items: 128x64 GLCD with Soldered ConnectorTOUCHPANEL OVERLAY For 128x64 GLCD Very High Quality 128x64 yellow-black Graphical LCD Display with factory-mounted4-Wire Touchscreen.Only 5V is required to power this JHD128X64 compatible LCD. Negative voltage supply (Vee) for the LCD screen drive and contrast is built into LCD module. You can create your own touch panel control code using any compiler and microcontroller that has at least 4 ADC inputs, as shown in the Photos above. Compatible 4 x 1mm pitch FPC connectors are inexpensive and available from all the major electronic supply houses.
Ask Latest Price & Details
ZIGBEE BASE BOARD

ZIGBEE BASE BOARD

his is the base board which is used to connect the ZigBee to PC directly. This is having on board 5v and 3.3 v of regulated voltage. Input to this board at DC socket is in between 7.5 and 9v of AC or DC only. This is a simple to use, RS232 to base unit made by SVSEMBEDDED for the XBee, TARANG, CC2500 products. ZigBee Base Board - RS232 Features: Compatible with all Tarang, CC2500and XBee modulesBuilt in 3V3 Voltage regulatorOnboard 3V3 & 5V level converterStatus LEDXBee Pins available at 2.54mm berg strip
Ask Latest Price & Details
4X3 KEYPAD

4X3 KEYPAD
THIS PRODUCT HAS VARIETY OF APPLICATIONS. YOU MAY USE IT TO TEST YOUR MENU DRIVEN PROJECTS, AS DIALER PAD, AS PART OF YOUR CONTROL PANEL PROJECT OR AS ALPHA NUMERIC KEY PAD.THIS MODULE HAS NO ISOLATION BETWEEN ON THE SOLDER SIDE (BOTTOM SIDE). YOU SHOULD AVOID CONTACT OF SOLDER SIDE AND YOUR BODY WHILE USING IT. THIS WILL REDUCE THE ESD RISK.4X3 MATRIX KEYPAD SWITCHES THROUGH 7 PIN CONNCETOR. CAN CONNECT TO ANY OF OUR DEVELOPMENT BOARD OF C51, AVR OR ARMLPC2148 MICROCONTROLLER AND PROVIDE4X3 MATRIX KEYPAD SWITCHES THROUGH 7 PIN CONNCETOR.
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.