Wire Wound Finned tubes are manufactured at TAAM engineering on specially developed high speed finning machines. Our machines are capable of wire wound finning tubes in lengths up to any length as long as it can be transported. We are manufacturers of wire wound finned tubes with base tubes of carbon steels, stainless steels, copper and copper alloys like cupro-nickels, admiralty brass, aluminum brass with copper wire fins, stainless steel wire fins and GI (galvanized iron) fins. The base tubes of our standard wire wound fin tubes range from 3 mm to 120 mm with fin heights ranging from 3 mm to 40 mm.

Wire Wound Fin tubing with higher fin heights can be made on demand.

Wire wound fin tubes are used for making compact heat exchangers like air coolers, air cooled oil coolers, air heaters, air to air heat exchangers. Wire wound fins are formed with wire formed into a loop and the loops of wire are wound helically over the tube with simultaneous root soldering of the fins to the outer surface of the tube. The air flowing over the fin tube go round about the 'legs' of the fin loop causing immense turbulence. The root soldering eliminates almost all air gaps between the fins and the tube. This coupled with high turbulence results in high air side heat transfer coefficient. The air side heat transfer coefficient is highest as compared to any other type of fin tube for identical areas and parameters.

Wire wound fin tubes for use in air cooled oil coolers are provided with internal fins selected from wide variations in configuration. We also manufacture double pipe wire wound fin tubes for use in refrigerated air dryers and heat exchangers for viscous and small streams.

Wire Wound Finned tubes are manufactured at TAAM engineering on specially developed high speed finning machines. Our machines are capable of wire wound finning tubes in lengths up to any length as long as it can be transported. We are manufacturers of wire wound finned tubes with base tubes of carbon steels, stainless steels, copper and copper alloys like cupro-nickels, admiralty brass, aluminum brass with copper wire fins, stainless steel wire fins and GI (galvanized iron) fins. The base tubes of our standard wire wound fin tubes range from 3 mm to 120 mm with fin heights ranging from 3 mm to 40 mm.

Wire Wound Fin tubing with higher fin heights can be made on demand.

Wire wound fin tubes are used for making compact heat exchangers like air coolers, air cooled oil coolers, air heaters, air to air heat exchangers. Wire wound fins are formed with wire formed into a loop and the loops of wire are wound helically over the tube with simultaneous root soldering of the fins to the outer surface of the tube. The air flowing over the fin tube go round about the 'legs' of the fin loop causing immense turbulence. The root soldering eliminates almost all air gaps between the fins and the tube. This coupled with high turbulence results in high air side heat transfer coefficient. The air side heat transfer coefficient is highest as compared to any other type of fin tube for identical areas and parameters.

Wire wound fin tubes for use in air cooled oil coolers are provided with internal fins selected from wide variations in configuration. We also manufacture double pipe wire wound fin tubes for use in refrigerated air dryers and heat exchangers for viscous and small streams.

We manufacture twisted tape tube inserts for enhancing tube side heat transfer.

There is no limit to the length of twisted tape turbulator.

We manufacture twisted tape turbulators of all metals including:

stainless steels

copper

carbon steel

aluminum

Wire Matrix Turbulators consist of near oval loops of wire that can be simply pulled through the tubes as the turbulators are flexible. No soldering of the turbulator fins to tube walls is necessitated.

We are manufacturers of wire matrix turbulators (flexible turbulators) suitable for tube inner diameter as low as 3 mm, there being no upper limit for tube id or length of the turbulator. The number of loops in a foot can be varied between 90 to 600

We manufacture copper wire turbulators, stainless steel wire turbulators, GI Steel wire turbulators. Manufacture of turbulators of any metal wire is possible at our works.

Wire Wound Finned tubes are manufactured at TAAM engineering on specially developed high speed finning machines. Our machines are capable of wire wound finning tubes in lengths up to any length as long as it can be transported. We are manufacturers of wire wound finned tubes with base tubes of carbon steels, stainless steels, copper and copper alloys like cupro-nickels, admiralty brass, aluminum brass with copper wire fins, stainless steel wire fins and GI (galvanized iron) fins. The base tubes of our standard wire wound fin tubes range from 3 mm to 120 mm with fin heights ranging from 3 mm to 40 mm.

Wire Wound Fin tubing with higher fin heights can be made on demand.

Wire wound fin tubes are used for making compact heat exchangers like air coolers, air cooled oil coolers, air heaters, air to air heat exchangers. Wire wound fins are formed with wire formed into a loop and the loops of wire are wound helically over the tube with simultaneous root soldering of the fins to the outer surface of the tube. The air flowing over the fin tube go round about the 'legs' of the fin loop causing immense turbulence. The root soldering eliminates almost all air gaps between the fins and the tube. This coupled with high turbulence results in high air side heat transfer coefficient. The air side heat transfer coefficient is highest as compared to any other type of fin tube for identical areas and parameters.

Wire wound fin tubes for use in air cooled oil coolers are provided with internal fins selected from wide variations in configuration. We also manufacture double pipe wire wound fin tubes for use in refrigerated air dryers and heat exchangers for viscous and small streams.

We manufacture wire matrix turbulators (also called Wire Petal Turbulators) for enhancing tube side coefficients in lube oil coolers, turbine oil coolers, compressed air coolers etc. We can assist clients in selecting the correct configuartion of the wire matrix turbulator to achieve required heat transfer coefficients and pressure drops.

Wire matrix turbulator machine has been designed and made in India at TAAM engineering. Our special purpose wire matrix tube insert machines make wire matrix turbulators to fit in tubes and pipes having internal diameters ranging from 5.5 mm to any diameter as standard  turbulators. As innovators of wire matrix turbulator making machines and wire wound finning machines, we can make turbulators to custom specifications, there being no limitation to turbulator outer diameter and length of the turbulator.

Wire Matrix turbulators are very efficient tube heat transfer enhancement devices that increase the tube side heat transfer coefficient several fold. Our turbulators are used in heat exchanger tubes used for oil coolers, compressed air coolers, boiler pipes and tubes and host of other applications.

We are offering steam heating coils for heating air for fluidized bed dryers, tray dryers etc. Steam air heaters for heating air using steam as heating medium at low to medium pressures are manufactured using finned tubes manufactured in our own factory. Our designs of finned tube heating coils result in economical designs coupled with low air side pressure drops.

Flash steam can be used to pre heat the air in the flash steam to air pre-heater placed before the main live steam air heater for efficient heat recovery from flash steam. Steam coil air pre heaters (scaph) are manufactured to heat the ambient air to desired temperatures.

TAAM engineering manufactures air cooled oil radiators (air blast oil coolers) like air cooled hydraulic oil coolers, lube oil coolers, gear oil coolers and finned tube heat exchangers to cool other viscous fluids. Typical applications are oil cooling in excavators (earth movers), compressors etc. Wire wound fin tubes with internal fins are used for making the oil cooler compact and economical.

We manufacture wire wound fin tubes, turbulators and other fin tubes in our own factory. Base tubes of carbon steels, copper and copper alloys, stainless steel 304, stainless steel 316 and other stainless steel grades finned with galvanised mild steel, copper and stainless steel fins are used in fabrication of the air cooled cooler. The body material used so far is carbon steel and stainless steels.

We design complete fin fan oil cooler assembly and also supply as assembled unit comprising of finned tube oil cooler, the transition piece and the fan.

TAAM engineering manufactures air cooled vapor condensers to condense steam and organic vapors using ambient air as the cooling medium.

Wire wound fin tubes are used for making the condenser coils compact and economical.

Base tubes of carbon steels, copper and copper alloys, stainless steel 304, stainless steel 316 and other stainless steel grades finned with galvanised mild steel, copper and stainless steel fins are used in fabrication of the air cooled condenser, finned tube coils. The body material used so far is carbon steel and stainless steels.

We manufacture twisted tape tube inserts for use in heat exchangers for enhancing the tube side heat transfer. Twisted Tape tube inserts are being manufactured to suit process requirement. Currently we manufacture twisted tape turbulators in carbon steel, aluminium and stainless steel with outer diameters from 4.1 mm to 32 mm.

Wire wound soldered turbulators consist of rectangular loops of wire spirally wound and soldered over a solid round bar or tube. This wire wound turbulator is inserted inside tube and further soldered to the inner surface of the tube.

We manufacture wire wound turbulators suitable for tube id 8 mm, there being no upper limit for tube size or length. However, maximum operating temperature should not exceed 290 C.

Material of construction for wire wound turbulators being copper wire, stainless steel wire and galvanised steel wires.

We manufacture wire wound turbulators made of loops of wire wound helically on a central rod or tube and soldered to the inner surface of the tube. The internal turbulators are made of stainless steels, copper and galvanized steel wire. We make wire wound turbulators for tubes of inner diameter as low as 8 mm. There being no limit on higher daimeters and lengths.

Wire wound turbulators are excellant tube heat transfer enhancement devices that increase the tube side heat transfer coefficient several fold at not too high pressure losses. Our turbulators are used in heat exchanger tubes used for oil coolers, compressed air coolers.

We specialize in manufacturing all stainless steel wire turbulators and other turbulators with special composition wires. Other standard material of construction of our wire tube inserts are copper, brass and galvanised steel.

Pre heaters, heat recovery units and similar air to air heat exchangers are designed and manufactured at TAAM engineering.

Hot air and gases exiting processes in industries are used as heating medium to pre heat process air by passing over finned air to air heat exchangers. Exhaust gases from fuel combustion in generators, boilers etc. is also used as heating medium. Our designs incorporate wire wound finned tubes or spiral finned tubes as dictated by the process conditions. The finned tubes have turbulators of suitable type to make the heat exchanger compact and economical.

Air Cooled After-coolers and inter-coolers can be custom designed and manufactured to suit compressors.

Base tubes of carbon steels, stainless steel 304, stainless steel 316 and other stainless steel grades finned with galvanised mild steel, copper and stainless steel fins are used in fabrication of  air to air heat exchnagers. The body material used so far is carbon steel and stainless steels.