Talbros Sealing Material Pvt. Ltd. Faridabad, Haryana

Talbros produces custom nitrile or Buna-N rubber gaskets of the highest reliability and sealing quality that are manufactured from different grades. We offer a full range of transmission filter kit gaskets as well as a large range of gaskets used in engines all over the world. Some of the benefits of using our gaskets are Rubber Gaskets are the most tested sealing technique and has been used by window producers and other industries for decades. They have outstanding sealing properties and can withstand excellent temperature stability in extreme weather conditions. They are resistant to ageing, wear, ozone, UV light and weather influences. They are colour stable and hence leave no stains on PVC window frames. Rubber gaskets are also resistant to acid and are impermeable to gases. Viton Rubber Gaskets can be used with petroleum. EPDM rubber gaskets can withstand corrosive fluids like hydraulic fluid. Neoprene Rubber Gaskets can function under extremely low temperatures.

Talbros cuts Non-Asbestos Gaskets from material sourced from various manufacturers and can supply this material co-branded or private branded. In our bid to become a diversified sealing material supplier, this division is our most recent diversification. Talbros cuts Non-Asbestos Gaskets from material sourced from various manufacturers and can supply this material co-branded or private branded. Most of todays non-asbestos gasket materials contain either Kevlar, an aramid fiber, fiberglass, carbon, graphite or another mineral fiber. Regardless of the manufacturer, the basics are the filler and the elastomer used. While no two compounds (or the % of filler) are identical, the basic Elastomers are: NBR (Buna-N), SBR, EPDM or Neoprene. If you examine which material you need (as defined by the application) and select the non-asbestos gasket material with that elastomer you will usually do well. This method will also allow you to select a competitive brand that will serve your application. No two materials are identical so caution must always be exercised. In general the common “Binders” are:   NBR –  good for oils, gas, mild chemicals and water SBR –  good for saturated Steam, mild chemicals inert gas and water Neoprene –  good for saturated steam, refrigerants, oils, fuels, mild acids and alkalies and water. EPDM –  good for saturated steam, mild chemicals and water Each material listed will indicate the “Binder” which makes cross referencing equal materials a much easier task. You should however pay attention to Tensile strength (for pressure resistance) Temperature ratings, and Compression / Recovery ratings.   You must also consider for cut gaskets Size, Temperature, Application, Media, Pressure, Speed (if dynamic) of your specific application. If this is for a finished gasket you will also want to consider bolt loads, the size of bolts, the number of bolts, the bolt material and the available torque.

• TypeRubberized Abrasives

Talbros rubber cork gasket materials are produced from top quality cork intimately bonded with a synthetic rubber, which may be EPDM, SBR, Nitrile, Neoprene or Polyurethane type. The chemical properties of the material are determined partly by those of the cork and largely by the type of the rubber used. In order to make the right choice in terms of material, it is essential to be familiar with the mechanical, thermal and chemical conditions to which a particular gasket will be subjected during operation Our material is available within multiple  thicknesses ranging from 0.8mm to 145mm Sheet sizes  available with us can be any of the following dimesnsions- 36” x 24” or 915mm x 610mm 36” x 36” or 915mm x 610mm 1mtr x 1mtr or 1000mm x 1000mm 1.2mtr x 1mtr or 1200mm x 1000mm Talbros Rolls (Strips)  have a maximum width of 150mm (6”) and a maximum length of 50 meters.