Post Buy Requirement
TI
Nagpur, Maharashtra, India
gstGST : 27AAXPT1539N1ZO Verified Add Review

Other Products / Services

Enameled Copper Strips

  • Application Electric Connection
  • Diameter 0.02 - 1 Mm
  • Wire Gauge 0-5
  • Insulation Type Enamelled
  • Size 1.200 Mm To 0.093 Mm
  • Thermal Capacity 200°C

We are one of the leading Exporters of Enameled Copper Strips. We have been involved in the business of catering high quality Enameled Copper Strips to our wide base of clientele network. Our Enameled Copper Strips provide better insulation and are ideal for insulating oil in oil-filled transformers and switchgears. We offer Enamelled Copper Strips that are made from superior quality raw materials to ensure the characteristic features of the finished Enamelled Copper Strips. The salient features of our Enamelled Copper Strips are durability, resistivity, tensile strength, endurance, flexibility, resistance to heat, water and weather and affordability. We supply Enameled Copper Strips to electrical industries, automotive industries, etc. as these are applicable in windings of electric motor stators, generators, special transformers and high voltage motors.

View Complete Details

Fibreglass Covered Copper Strips

  • Material Copper And Aluminium
  • Copper Size Range 6 to 80 sq. mm
  • Aluminium Size Range 10 to 90 sq. mm
  • Copper Class 200, 180 & 155
  • Aluminium Class 180 & 155
  • For Round Al Wires 4.000 mm to 8.000 mm

We are a well reckoned Supplier of Fibreglass Covered Copper Strips. We offer a wide variety of Double Fibreglass Covered Copper Strips in various specifications as per the clients� requirements. Our Double Fibreglass Covered Copper Strips are efficient insulators and ensure high thermal stability. Fiberglass Covered Copper Strips are known for their electrical properties, resistance to varnish and abrasion. We supply Fibreglass Covered Copper Strips to electrical industries, automotive industries, etc. as these are applicable in windings of electric motor stators, generators, special transformers and high voltage motors.

View Complete Details

All Aluminium Conductors (AAC)

AAC is made up of one or more strands of hard drawn 1350 Aluminum Alloy.
AAC has had limited use in transmission lines and rural distribution because of the long spans utilized.
Good Conductivity -61.2% IACS
Good Corrosion Resistance
High Conductivity to Weight Ratio.
Moderate Strength

Typical Application
Short spans where maximum current transfer is required.
The excellent corrosion resistance of aluminum has made AAC a conductor of choice in coastal areas.
Because of its relatively poor strength-to-weight ratio, AAC has seen extensive use in urban areas where spans are usually short but high conductivity is required.
These conductors are used in low, medium and high voltage overhead lines.
View Complete Details

All Aluminium Alloy Conductors (AAAC)

AAAC are made out of high strength Aluminum-Magnesium-Silicon alloy.
AAAC with different variants of electrical grade Alloys type 6101 and 6201.
These conductors are designed to get better strength to weight ratio and offers improved electrical characteristics, excellent sag-tension characteristics and superior corrosion resistance when compared with ACSR.
Equivalent aluminum alloy conductors have approximately the same ampacity and strength as their ACSR counterparts with a much improved strength-to-weight ratio, and also exhibit substantially better electrical loss characteristics than their equivalent single layer ACSR constructions. The thermal coefficient of expansion is greater than that of ACSR.
As compared to conventional ACSR, lighter weight, comparable strength & current carrying capacity, lower electrical losses and superior corrosion resistance have given AAAC a wide acceptance in the distribution and transmission lines.

Features
High strength to weight ratio
Better sag characteristics
Improved electrical properties
Excellent resistance to corrosion
Specifications
Higher Tensile Strength
Excellent Corrosion Resistance
Good Strength to Weight Ratio
Lower Electrical Losses
Moderate Conductivity 52.5% IACS
Typical Application
Transmission and Distribution applications in corrosive environments, ACSR replacement.
View Complete Details

Aluminium Conductor Steel Reinforced (ACSR)

Aluminum Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn 1350-H19 aluminum wire on galvanized steel wire core.
The core can be single wire or stranded depending on the size.
Steel wire core is available in Class A , B or Class C galvanization for corrosion protection.
Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease.
The proportion of steel and aluminum in an ACSR conductor can be selected based on the mechanical strength and current carrying capacity demanded by each application.
ACSR conductors are recognized for their record of economy, dependability and favorable strength / weight ratio. ACSR conductors combine the light weight and good conductivity of aluminum with the high tensile strength and ruggedness of steel.
In line design, this can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors.
The steel strands are added as mechanical reinforcements.
ACSR conductors are recognized for their record of economy, dependability and favorable strength / weight ratio.
ACSR conductors combine the light weight and good conductivity of aluminum with the high tensile strength and ruggedness of steel.
In line design, this can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors.
The steel strands are added as mechanical reinforcements.
The cross sections above illustrate some common stranding.
The steel core wires are protected from corrosion by galvanizing.
The standard Class A zinc coating is usually adequate for ordinary environments.
For greater protection, Class B and C galvanized coatings may be specified.
The product is available with conductor corrosion resistant inhibitor treatment applied to the central steel component.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Aditya Tapadia (TAPADIA INSTRUMENTS)
  • T-25, M.I.D.C. Area, Higna Road, Hingna Road, Nagpur, Maharashtra - 440016
  • Share us via
  • Call 08068051310 Ext. 173
Aluminium Conductor Steel Reinforced (ACSR) Retailer from Nagpur, Maharashtra
Post Buy Requirement
TI
Nagpur, Maharashtra, India
gstGST : 27AAXPT1539N1ZO Verified Add Review

Our Products

Enameled Copper Strips

  • Application Electric Connection
  • Diameter 0.02 - 1 Mm
  • Wire Gauge 0-5
  • Insulation Type Enamelled
  • Size 1.200 Mm To 0.093 Mm
  • Thermal Capacity 200°C

We are one of the leading Exporters of Enameled Copper Strips. We have been involved in the business of catering high quality Enameled Copper Strips to our wide base of clientele network. Our Enameled Copper Strips provide better insulation and are ideal for insulating oil in oil-filled transformers and switchgears. We offer Enamelled Copper Strips that are made from superior quality raw materials to ensure the characteristic features of the finished Enamelled Copper Strips. The salient features of our Enamelled Copper Strips are durability, resistivity, tensile strength, endurance, flexibility, resistance to heat, water and weather and affordability. We supply Enameled Copper Strips to electrical industries, automotive industries, etc. as these are applicable in windings of electric motor stators, generators, special transformers and high voltage motors.

View Complete Details

Fibreglass Covered Copper Strips

  • Material Copper And Aluminium
  • Copper Size Range 6 to 80 sq. mm
  • Aluminium Size Range 10 to 90 sq. mm
  • Copper Class 200, 180 & 155
  • Aluminium Class 180 & 155
  • For Round Al Wires 4.000 mm to 8.000 mm

We are a well reckoned Supplier of Fibreglass Covered Copper Strips. We offer a wide variety of Double Fibreglass Covered Copper Strips in various specifications as per the clients� requirements. Our Double Fibreglass Covered Copper Strips are efficient insulators and ensure high thermal stability. Fiberglass Covered Copper Strips are known for their electrical properties, resistance to varnish and abrasion. We supply Fibreglass Covered Copper Strips to electrical industries, automotive industries, etc. as these are applicable in windings of electric motor stators, generators, special transformers and high voltage motors.

View Complete Details

All Aluminium Conductors (AAC)

AAC is made up of one or more strands of hard drawn 1350 Aluminum Alloy.
AAC has had limited use in transmission lines and rural distribution because of the long spans utilized.
Good Conductivity -61.2% IACS
Good Corrosion Resistance
High Conductivity to Weight Ratio.
Moderate Strength

Typical Application
Short spans where maximum current transfer is required.
The excellent corrosion resistance of aluminum has made AAC a conductor of choice in coastal areas.
Because of its relatively poor strength-to-weight ratio, AAC has seen extensive use in urban areas where spans are usually short but high conductivity is required.
These conductors are used in low, medium and high voltage overhead lines.
View Complete Details

All Aluminium Alloy Conductors (AAAC)

AAAC are made out of high strength Aluminum-Magnesium-Silicon alloy.
AAAC with different variants of electrical grade Alloys type 6101 and 6201.
These conductors are designed to get better strength to weight ratio and offers improved electrical characteristics, excellent sag-tension characteristics and superior corrosion resistance when compared with ACSR.
Equivalent aluminum alloy conductors have approximately the same ampacity and strength as their ACSR counterparts with a much improved strength-to-weight ratio, and also exhibit substantially better electrical loss characteristics than their equivalent single layer ACSR constructions. The thermal coefficient of expansion is greater than that of ACSR.
As compared to conventional ACSR, lighter weight, comparable strength & current carrying capacity, lower electrical losses and superior corrosion resistance have given AAAC a wide acceptance in the distribution and transmission lines.

Features
High strength to weight ratio
Better sag characteristics
Improved electrical properties
Excellent resistance to corrosion
Specifications
Higher Tensile Strength
Excellent Corrosion Resistance
Good Strength to Weight Ratio
Lower Electrical Losses
Moderate Conductivity 52.5% IACS
Typical Application
Transmission and Distribution applications in corrosive environments, ACSR replacement.
View Complete Details

Aluminium Conductor Steel Reinforced (ACSR)

Aluminum Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn 1350-H19 aluminum wire on galvanized steel wire core.
The core can be single wire or stranded depending on the size.
Steel wire core is available in Class A , B or Class C galvanization for corrosion protection.
Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease.
The proportion of steel and aluminum in an ACSR conductor can be selected based on the mechanical strength and current carrying capacity demanded by each application.
ACSR conductors are recognized for their record of economy, dependability and favorable strength / weight ratio. ACSR conductors combine the light weight and good conductivity of aluminum with the high tensile strength and ruggedness of steel.
In line design, this can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors.
The steel strands are added as mechanical reinforcements.
ACSR conductors are recognized for their record of economy, dependability and favorable strength / weight ratio.
ACSR conductors combine the light weight and good conductivity of aluminum with the high tensile strength and ruggedness of steel.
In line design, this can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors.
The steel strands are added as mechanical reinforcements.
The cross sections above illustrate some common stranding.
The steel core wires are protected from corrosion by galvanizing.
The standard Class A zinc coating is usually adequate for ordinary environments.
For greater protection, Class B and C galvanized coatings may be specified.
The product is available with conductor corrosion resistant inhibitor treatment applied to the central steel component.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Aditya Tapadia (TAPADIA INSTRUMENTS)
  • T-25, M.I.D.C. Area, Higna Road, Hingna Road, Nagpur, Maharashtra - 440016
  • Share us via
  • Call 08068051310 Ext. 173