Our Products
These Rotary oil- sealed pumps are quite operating and vibration less designed for continuous working and tested to assured satisfactory performance of the pump. Mechanism is contained in a metal case with oil level sight gauge and drain plug at base. Motor driven pumps are completely mounted on rectangular base plate and are furnished with V belt & motor. Supplied with non return valve & vacuum gauge.
STAGE | SINGLE STAGE | DOUBLE STAGE | |||||||
Pumping speed ltr | 50 | 100 | 150 | 200 | 50 | 100 | 150 | 200 | |
Motor speed ( RPM) | 550 | 550 | 550 | 550 | 550 | 550 | 550 | 550 | |
Motor power (H.P) | 1/4 | 1 /4 | 1/2 | 1/2 | 1/4 | 1/4 | 1/2 | 1/2 |
Optional Extra : Vacuum Gauge (Dial type with regulator).
The generated design and construction comprises of an outer chamber fabricated out of thick cold rolled mild steel sheets, Rectangular in shape placed horizontally with opening in the front. Refractory muffle of required muffle of required size forms the inner chamber. This is surrounded by ceramic fiber blankets on all the four sides and the rear to reduce heat losses to a minimum.
The chamber is provided with a single 100mm thick ceramic fibre insulation mounted on heavy duty hinges and provided with latch. The furnace is heated by KANTHAL APM heating coils wound in spiral form on the muffle high grade refractory cement and backed by ceramic fiber blankets. The temperature inside is maintained at any conjunction with a Cr/Al thermo couple housed in the hot zone.
Control Panel: Consist of temperature controller, Airbrake magnetic contractor, indicating lamps, isolated. The furnace is finished in attractive powder coat finish.
Technical specifications:
Optional:
Microprocessor based digital PID controller with SSR output for better accuracy of 2 to 3 C
Inner Chamber size (mm) | Power Rating (kw) |
100 x 100 x 225 | 4.0 |
125 x 125 x 250 | 4.0 |
150 x 150 x 300 | 4.5 |
200 x 200 x 300 | 6.0 |
300 x 300 x 300 | 7.5 |
Doyble walled chamber, outer chamber rectangular in shape made of thick mild steel sheets. The inner chamber is RECTANGULAR in shape made of stainless steel sheets with provision for vacuum pump and the vacuum gauge is provided at the top of unit. The inner chamber accommodates one no. Stainless steel tray at adjustable height.
The oven is insulated with special grade glass wool to reduce the radiation heat loss to the minimum. The door is of stainless steel plate with a specially designed Mechanism having alignment. A perfect seal is obtained by a positive screw specially designed tightening lid. A glass window is provided in the center for viewing without opening the door.
A set of bound heaters is wrapped around the vacuum chamber for fast response and maximum uniformity of heat. The temperature is indicated and controlled by a microprocessor based PID temperature indicator cum controlled by a microprocessor based PID temperature indicator cum controller working in conjunction with RTD sensor.
A compact model control panel accommodating, pilot indicating lamps, PID temperature controller, will be fitted on the side of the oven. For easy operation.
Chamber size (diameter x ht) mm | 300 x 300 x 350 |
Maximum temperature C | 200 |
Optional:
TLPPL 128 TECHNICO HOTPLATE
Technico hot plates are available in two models- Round and rectangular shape with cast iron or stainless steel top.
This is a heavy duty heating plate with a removable cast iron plate/ stainless steel at the top. The housing is made of mild steel sheet and finished in powder coat paint.
A heat control switch for low, medium & high and two nos. indicating lamps are provided on the front panel. The unit is designed for operating on 230 V Single phase 50 C/ S. mains.
Round model /Square model :
SIZE | RATING (kw) |
8 | 1.5 |
10 | 2.0 |
12 | 2.0 |
For Rectangular Model :
SIZE | RATING (kw) |
10 x 12 | 1.5 |
10 x 16 | 1.5 |
12 x 18 | 1.75 |
12 x 24 | 2.0 |
18 x 24 | 3.0 |
Optional :
Digital temperature controller.
Microprocessor based PID Controller.
Topmade of stainless steel
Fully made of stainless steel.
All types of Industries needs to have a Testing Lab, let it be in Food & Beverage, Cement, Paper, Fertilizer, Distilleries & Breweries, Petro Chemicals, Refineries, Sugar, Automobile, Steel, Foundry, RO Plants, Mineral Water Plants, Effluent T reatment Plants, Tanneries etc
Depending on the types and nature of the Testing Equipment / Quality Control Equipment and the Size of the Laboratory the required furniture and accessories can be fitted. Technico' gives support in designing the Labs to suit the user's need. Adding Value and Aesthetic looks, a utility Lab can be created.
This is very useful of nitrogen content in the substance by digestion for 300 or 500 ml. Capacity flasks provided with LEAD FUME DUCT and pair of hangers. The unit works on 220 /230 V A.C supply.
Inner is made of SS-304 & outer fabricated out of cold rolled MS sheets with powder coating. The paramedical lid is made of SS prevents falling of condensed water droplets on the specimens. The inter space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses.
Heated by energy efficient heaters & controlled by microprocessor based digital controller with LED display with RTD sensor.
The bath is provided with an oscillating tray riding on rollers oscillated through a PMDC motor for continuous operation. The shaking tray can either hold test tube or Erlenmeyer flask of capacity 25 ml. or 50 ml. or 100 ml. or 250 ml. or 500 ml. or 1000 ml. as ordered by the users. Electronically controlled shaking mechanism provides quick reciprocating motion & speed control. The unit is fixed with DC drive for speed range from 20 200 cycles per minute.
Built in front control panel accommodating all the controlling device located at the side of the bath for operational convenience.
COOLING OPTION:
CFC pre refrigeration system provided at the lower portion for controlling the temperature from 0 100C
TECHNICAL SPECIFICATIONS:
OPTIONAL:
Tehinco Cryo bath is a doubled walled chamber, inner made of stainless steel of 304 grade and outer made of cold rolled mild steel sheets and attractively finished in powder coat painting. The inter space in between the walls is tightly packed with PUF insulation. The chamber is provided with top opening lid made of stainless steel and provided with handle.
Evaporating coils are kept inside the inner chamber for faster cooling. CFC free registration system consisting of hermetically sealed compressor, air-cooled condenser and accessories is provided at the lower portion of the bath.
The temperature is controlled by Digital ON/ OFF temperature controller tirrer to recwith an accuracy of 1 to 2 C.The unit is fitted with a sti to re circulate the liquid in the tank to maintain uniform temperature inside the bath.
Capacity (ltrs) | Chamber size (mm) | Rating (kw) |
12 | 200 x 220 x260 | 2.0 |
28 | 300 x 360 x 300 | 3.0 |
40 | 370 x 300 x 400 | 4.0 |
Optional:
Microprocessor based digital PID temperature controller for better accuracy.
Double walled chamber, outer chamber rectangular in shape made of thick mild steel sheets. The inner chamber is Cylindrical in shape made of stainless steel sheets with provision for vacuum pump and the vacuum gauge is provided at the top of unit. The inner chamber accommodates one no. Stainless steel tray at adjustable height.
The oven is insulated with special grade glass wool to reduce the radiation heat loss to the minimum. The door is of stainless steel plate with a specially designed Mechanism having alignment. A perfect seal is obtained by a positive screw specially designed tightening lid. A glass window is provided in the center for viewing without opening the door.
A set of bound heaters is wrapped around the vacuum chamber for fast response and maximum uniformity of heat. The temperature is indicated and controlled by a microprocessor based PID temperature indicator cum controlled by a microprocessor based PID temperature indicator cum controller working in conjunction with RTD sensor.
A compact model control panel accommodating, pilot indicating lamps, PID temperature controller, will be fitted on the side of the oven. For easy operation.
Chamber size (diameter x depth) mm | 200 x200 | 250 x 250 | 250 x 300 | 300 x 300 |
Maximum temperature C | 200 | 200 | 200 | 200 |
The Instrument Work Table can be provided with below options.
This Lab can have the following arrangements :
Technico heating Mantles are single piece and are made of flexible knitted glass fabric to which resistance wire is attached in a coil form. The heating mantle is housed in a housing made of mild steel sheets with powder coating finish. Each Mantle is fitted with built in energy regulator & pilot lamps. Designed for operation on 230 V single- phase 50 cys. A/C. Suitable for heating application using round bottom borosilicate glass ware.
Optional :
Capacity (ml) | 100 | 250 | 500 | 1000 | 2000 | 3000 | 5000 | 10000 | 20000 | 50000 |
Rating (watts) | 60 | 150 | 200 | 300 | 500 | 750 | 800 | 1000 | 2000 | 3000 |
A Micro / Bio Lab can have the following arrangements :
Storage cupboard are suitable for wall mounting above the worktable. Ideal for storing important chemicals, reagents, etc., two adjustable shelves are provided with sliding glass doors and locks.
The Cupboard is made of CRCA / G.I sheet metal with Epoxy powder coating.
Technico tray Drier consists of a Triple walled chamber. The inner chamber fabricated out of Mild steel or 304 grade stainless steel sheet. The middle and outer chamber is made of mild steel. The inter space in between the walls is tightly packed with special grade glass wool insulation to eliminate radiation heat loss to a minimum.
The chamber is provided with a double walled door double door made of mild steel or SS 304 in the front with glass wool insulation in between. The door mounted on heavy duty hinges and provided with roller type spring loaded latch.
The heating elements used will be strip type heaters distributed in both sides of the drier and the terminals are neatly brought and terminated in the junction box outside the chamber. The heating elements can be easily replaced and due care is taken for easy maintenance.
To achieve uniform temperature all over the inner chamber, the unit is incorporated with continuously rated powerful motor along with blower assembly will be fitted on the sides or top of the oven. The drier will be provided with adjustable opening at the top to vent moisture vapors produced during process.
The temperature inside is maintained at any desired level within the operating range by a On / Off Digital temperature controller working in conjunction with RTD / Thermocouple placed in the hot zone.
The drier will accommodates required number of trays. The trays are fabricated out of 304 grade stainless steel sheets the trays will be stainless steel trays with SS bracket runner.
A compact control panel accommodating, pilot indicating lamps, On / Off switch , On /Off Digital temperature controller, MCB, Starter, units, etc., is provided at oneside of the chamber for operational convenience.
Technical Specification:
Options:
NON STANDARD SIZE CAN BE OFFERED ON REQUEST.
Technico salt spray test chamber entire is constructed by thick polypropylene or acrylic sheet body. The top lid door will be made of transparent Acrylic. The solution reservoir is separated externally in a cylindrical vessel and fixed to the side of the main chamber. The solution is sprayed inside the chamber by means of compressed air (Air compressor not in our scope) and its level is controlled by float valve.
The main chamber is provided with transparent acrylic cover lid mounted on fabricated acrylic hinges. The top lid closes the entire chamber without fog leakage. The saturation tower and the control panel are attached with the sidewall of the main chamber. The control panel is made of FRP material. Solution and water drain out tap are also provided. Suitable specimen holders and job holding devices are furnished inside the chamber.
Technical Specification:
Temperature controller:
Humidity Indicator:
Digital Timer:
Pressure gauge:
Solution tank :5 % of the sodium chloride (100 lit) is prepared and poured in the chamber reservoir. It is passed to the spray tower through the mechanical float through which is maintaining the water level in the tower.
POWER SUPPLY:The chambers plug pin should be connected to the power supply & the timer to be set according to the testing hours.
PRESSURE REGULTOR WITH GAUGE:The compressed air enters to the solenoid valve. It is controlled by the help of pressure regulator (15 lbs.) in pressure gauge.
When the testing specimen or components are loaded to the chamber. The drain out valve is kept open because the condensed for water should not touch the specimens
STANDARD SIZE:600 x 600 x 600H or 600 x 900 x 900H.
We are the main supplier of this product.
AUTOCLAVE VERTICAL
Technico Vertical Autoclave is a Double walled chamber. The Interior, Perforated Basket and the Doomed Lid made of polished Stainless steel of 304 grade, Argon TIG welded. The outer chamber is also made of 304 grade stainless steel. The doom lid is tightened with wing nuts to ensure pressure tightness. Heating elements are immersion type, heaters of suitable rating. The unit is fitted with Neoprene rubber gasket to ensure tight sealing. The unit is incorporated with pedal lifting device for easy opening of the lid.
Standard accessories supplied with unit are pressure gauge, steam release cock, spring loaded safety valve, Cord and plug.
Technical specifications:
Inner chamber size x Height (mm) | Capacity (lts.) | Power rating (kw) |
250 x 450 | 22 | 2.0 |
300 x 500 | 40 | 3.0 |
350 x 600 | 50 | 3.0 |
450 x 600 | 100 | 4.0 |
450 x 750 | 125 | 4.0 |
550 x750 | 150 | 5.0 |
750 x 1000 | 250 | 6.0 |
Optional Accessories:
TLPPL 102 TECHNICO HORIZONTAL AUTOCLAVE CYLINDER
Technico Horizontal Autoclave is a triple walled unit, mounted horizontally on a sturdy heavy mild steel tubular stand. Interior chamber & Boiler are made of SS 316 Grade. Jacket exterior, Lid ring radial system piping & Boiler are made of SS 304 Grade & the lid made of polished stainless steel with leak proof argon TIG welding. The lid is tightened with radial locking system self-locking safety door which cannot be opened while the chamber is under pressure.
Separate valves are provided for injection of steam into the chamber & releasing the steam from the chamber.
Standard accessories supplied with the unit:
Automatic low water level cut off device, Pressure gauge & Steam release cock, Safety valve & Digital temperature indicator.
x Depth (mm) | Capacity app. (lts.) | Power rating (kw) |
400 x 600 | 78 | 6.0 |
500 x 900 | 165 | 9.0 |
550 x 750 | 152 | 6.0 |
400 x 1100 | 162 | 9.0 |
500 x 1200 | 221 | 9.0 |
Techinco Hot & cold chamber is a sturdy, triple walled construction, interior made of 304 stainless steel sheets and exterior made of cold rolled mild steel / Electro- Galvanized sheet steel. The inter space in between the walls is tightly packed with 75 mm PUF insulation to minimize thermal loss.
The chamber is provided with double walled door with toughened glass viewing window which allows inspection of samples without disturbing the temperature inside the chamber. The door is mounted on heavy duty chromium plated hinges and with effective locking arrangements and seals against atmospheric infiltration by resistence silicon rubber gasket.
Heating elements are made of imported nichrome wires evenly distributed on the three sides. The temperature below ambinent is achieved by incorporating heavy duty sealed CFC free compressor of emersion cope land make having condenser reservoir, cooling fan assembly and filled with suitable Refrigerant gas which will be circulated through out the inner chamber for effective uniform temperature.
The temperature within the range is a controlled and indicated by Microprocessor based PID Controller or optionally a smart range Microprocessor based Programmable PID controller with PT 100 sensor. The Microprocessor based programmable PID controllers will have multi segments (heat, cool & soak) having multi program.
The operating time for the chamber can be set by means of a automatic timer provided in the control panel.
A compact control panel accommodating all controlling switches, indicating lamps, Temperature controllers are located on the side of the chamber for operational convenience.
Option : RS 232 Computer interfacing. In addition user friendly software will be incorporated. (computer not in our scope).
Technical Specification:
Available Temperature Ranges : - 50 Deg . C to -150 Deg. C. 3 Deg.C.
Chamber size : 450 x 450 x 450 mm Min size.
ANY WORKING CHAMBER SIZE AND TEMPERATURE RANGE CAN BE OFFERED.
Technico Hot Air oven Thermostat model is a double walled chamber, inner made of stainless steel sheets and outer made of cold rolled mild steel sheets duly finished in powder coating. Inter space in between the walls is tightly packed with special grade glass wool.
Inner chamber accommodates perforated stainless steel trays at adjustable heights. Insulated double walled door in the front is provided with locking arrangements. Heating is by Kanthal A1 heaters evently distributed on the three sides. Temperature is indicated and controlled by precision thrermostat within the opening range. Built in control panel accommodating all electricals / electronic accessories is provided of the side of the chamber.
Technical Specification:
Other details as above
Designed for continuous shaking of solutions in Erlenmeyer flasks. It is a compact bench type table top model, counter balanced drive mechanism for high stability and dependability for continuous operation. Platform fitted on ball bearing crank shafts for giving an orbital motion to the flasks within a of 25 mm. Platform provided with lotus clamps for holding the flask. A geared variable speed DC motor with variable speed control, mounted on a heavy & sturdy angle iron frame. A speed indicated by digital RPM indicator. Designed to work on 220/230 V AC.
Heated by energy efficient heaters & controlled by microprocessor based digital controller with LED display with RTD sensor.
The bath is provided with an oscillating tray riding on rollers oscillated through a PMDC motor for continuous operation. The shaking tray can either hold test tube or Erlenmeyer flask of capacity 25 ml. or 50 ml. or 100 ml. or 250 ml. or 500 ml. or 1000 ml. as ordered by the users. Electronically controlled shaking mechanism provides quick reciprocating motion & speed control. The unit is fixed with DC drive for speed range from 20 200 cycles per minute.
Built in front control panel accommodating all the controlling device located at the side of the bath for operational convenience.
COOLING OPTION:
CFC pre refrigeration system provided at the lower portion for controlling the temperature from 0 100c
TECHNICAL SPECIFICATIONS:
OPTIONAL:
Platform size (cm) | Holding capacity |
45 x 45 | 9 flask x 500 ml. |
16 flask x 250 ml. | |
60 x 60 | 25 flask x 500 ml. |
36 flask x 500 ml. | |
90 x 90 | 49 flask x 500 ml. |
81 flask x 350 ml. |
Technico Flocculator or jar testing apparatus consists of a illuminated base with fluorescent tube mounted below translucent plastic plate to provide diffused cold light through floc samples. Flocculator consists of geared continuous run heavy duty 1/ 20 h.p variable speed motor from 50 to 100 RPM with built in speed control.
Stainless steel stirring rods are provided with adjustable spacers to adjust the depth of stirring paddles. The stirring shafts can be removed without disturbing other stirrers. It is supplied with either two or four or six stirrers working on 230 V AC. This unit is supplied with beakers.
Models Available:
We are the main supplier of this product.
Technico Muffle furnace construction comprises of an outer chamber fabricated out of thick cold rolled mild steel sheets. Rectangular in shape placed horizontally with opening in the front. Refractory muffle of required muffle of required size forms the inner chamber. This is surrounded by ceramic fibre blankets on all the four sides and the rear to reduce heat losses to a minimum.
The furnace is heated by KANTHALAI heating coils wounded in spiral form on the muffle embedded in high grade refractory cement and backed by ceramic fibre blankets.
The temperature inside is maintained at any desired level within the operating range by a digital automatic temperature indicator cum- controller working in conjuction with a Cr/ Al thermocouple housed in the hot zones.
Control panel : Consists of temperature controller, Air break magnetic contractor, indicating lamps, energy regulator. The furnace is finished in attractive powder coat finish.
Technical specifications:
OPTIONAL:
Microprocessor based digital PID controller with SSR output better accuracy of 2 to 3 C.
Inner Chamber size (mm) | Power Rating (kw) |
100 x 100 x 225 | 3.5 |
125 x 125 x 250 | 3.5 |
150 x 150 x 300 | 4.0 |
200 x 200 x 300 | 5.0 |
300 x 300 x 300 | 6.0 |
Designed for continuous shaking of solutions in Erienmeyer flasks. It is a compact bench type table top model with platform fitted with lotus clamps mounted on a ball bearing crank shafts to give an orbital motion to the flaks with in a diameter of 25 mm. A see through acrylic cover is provided.
Heating system with air circulation is also provided. Temperature controlled by digital temperature controller & fitted to air circulating fan for temperature uniformity.
The DC motor with variable speed control is covered by means of a V belt with pitch pulley & is mounted on a heavy sturdy angle iron frame. The speed is indicated in RPM indicator. Designed to work on 220/230 V AC supply.
TECHNICAL SPECIFICATIONS:
OPTIONAL:
This is very useful for distillation purpose for 300 ml or 500 ml.
The unit is provided with condenser rack. The unit works on 220 / 230 V A.c. supply.
Technico Glove box main working chamber will be made of stainless steel 304 with Epoxy powder coating finish. The chamber will be provided with a Antee / Mini- pass chamber to enable transfer of necessary samples into the main chamber.
The Glove box chamber will have a front window for clear observation of the inner chamber. If Transparent Acrylic windows is required on both sides we can also provide this.
The gloves will made ofBlack Neoprene Rubberof 30 Mil.
Size : 6 cff x 32 L Or 8 cuff x 32 L
The chamber will be illuminated by tube lights provided in the front top side for a clear bright view of the inner chamber.
The main chamber will be provided with a vacuum port, Gas purging port and gas inlet part with suitable valve arrangements. The vacuum port will be used to vacuumed the chamber to remove the air/ atmosphere / Moisture vapours from the chamber. The chamber under ve pressure can be now purged with any insert Gas like nitrogen etc. to have a working inert atmosphere inside.
Both the main chamber and Antee chamber can be purged with inert gas like Nitrogeen etc. for having a inert working atmosphere inside the glove box chamber. The gas from a cylinder is connected to the gas inlet below the moisture silica gel filter.
This will neutralize the ve pressure and make the chamber slightly above atmosphere pressure. A Dial Gauge is provided to indicate the vacuum and pressure . The same process can be performed for the Antee Chamber.
Note: The Glove box is not meant to be operated under High vacuum or High pressure.
A Suitable vacuum pump of required capacity will be provided with in built and fittings with vacuum Hose connection. A timer will be provided which will cut- off the vacuum system of safety level.
OPTIONAL:
Chamber size (L ) x ( W) x (H) mm | No of Gloves |
800 x 800 x 800 | 1 pair |
1000 x 800 x 900 | 1 pair |
1200 x 900 x 1000 | 1 pair or 3 gloves |
1500 x 900 x 1000 | 2 pair |
SINK UNIT
A Stand alone Sink Unit give additional advantage in an Lab. This kind of Sink Unit can be positioned any where in the lab as required and is easy to shift to another location at later stage without disturbing the existing Work table arrangements.
SALIENT FEATURES
We are the main supplier of this product.
Material of Construction: Pipe made up of GI (C - Class) heavy grade confirming to IS : 2139 with self closing stainless steel valve. Bowl for Eye Wash, Eye wash Nozzles and Shower Head are made up of Highly Visible anti corrosive plastic / SS 304 Grade. F oot P edal, Spring and pull chain are made up of MS Galvanized / SS 304 Grade.
EMERGENCY EYE WASH: (Hand/Foot Operated)
Material of Construction: Pipe made up of GI (C - Class) heavy grade confirming to IS : 2139 with self closing stainless steel valve. Bowl for Eye Wash, Eyewash Nozzles and Shower Head are made up of Highly Visible anti corrosive plastic / SS 304 Grade.
TISSUE CULTURE RACKS Tissue Culture Racks are used in R&D and developing of New and Hybrid variety of Saplings / Plants by Tissue Culture method under In-Door artificial Illumination and Humidity controlled environment.
MATERIAL OF CONSTRUCTION :
The structure is made of M.S.Tube Epoxy powder coated or Stainless Steel Tube of and the Racks made of 20 Swg . M.S.Sheet epoxy powder coated or Stainless Steel 304 Sheet.
CONTROL PANEL :
Located at the right side of the Rack with the following :
In addition - 2 Nos. Cooling Fans will be provided at the back side of the Control Panel.
Techinco upright Deep freezer model is a double walled chamber. The inner chamber is made of corrosive thick gauge stainless steel sheet of 304 Grade and outer made of thick cold rolled mild steel, attractively finished in Epoxy powder coating. The inter space between the outer and the inner chamber will be tightly packed with PUF insulation on all the sides Trays at adjustable height.
The doubled walled door in the front, is made as per chamber construction, mounted heavy duty hinges and provided with effective locking arrangements. The door is gasketted along the edges for effective sealing of the door in closed position.
CFC free refrigerant system consists of hermetically sealed cope land compressor, air cooled condenser and heavy duty motor driven fan are provided at the low portion. Temperature is indicated and controlled by smart range of digital temp. controller working in conjuction with PT -100 sensor. The unit is mounted on the smooth moving castor wheels for eazy movement with the laboratory.
Optional:
Suitable Voltage Stabilizer.
Capacity (ltrs) | Trays | Inner chamber size (mm0 |
110 | one | 425 x 400 x680 |
165 | two | 500 x 415 x 825 |
280 | three | 580 x 500 x 1000 |
325 | three | 725 x 500 x 900 |
The Document / Book / File Storage Cupboard (SCV) is provided with 4 or 5 horizontal partitions with front shutter slide in / slideout type arrangement with locking facility. Ideal for storage of all types of documents / books etc.
The Cabinet is made of CRCA / G.I sheet metal with Epoxy powder coating.
Electrically operated, Body made of stainless steel. The unit is fitted with built in energy regulator and indicating lamps.
Suitable for heating cruicbles with samples.
AIR CURTAIN
The Air Curtain maintains the interior air Conditioning efficiency to save energy, shile preventing entry of dust, harmful insects and Fumes from outside. Automatic switch for operating When opening / closing of door.
Canopy hoods are designed to remove steam, heat or odours from large or bulky apparatus such as ovens, steam baths or autoclaves. Vapour removal is most efficient when the canopy is mounted no more that 12 above the equipment.
PEG BOARD
Lab Glassware drying rack / pegboard, 400 * 550* 110 mm, 27 Pegs in authentic grey color made up of High Gr ade PP with Single faced, Tray hole for water drainage and detachable Peg for convenient use. Installation can be done in deck mounted pattern also.