Technophilia Systems Pvt. Ltd.

New Link Road, Mumbai, Maharashtra

AVR Atmega 8 Development Mother Board - SN 138020 is especially designed for the students having interest in electronics, embedded system, robotics and industrial-automation. This board is made in such a way that it becomes easier for any body to learn about AVR micro controllers. This board can also be used in various applications and hobby projects.

We are offering 8051 development board - s/n 102011. 1. 8051 development board (102011): 1.1. Features 8051 development board is a 8051 micro controller based mother board. It can be use for various embedded system development applications and in the field of robotics as a brain of the robot. This board have the following features. compatible with most of the 8051 and 8052 series of 40 pin microcontrollers. available with nxp p89v51rd2 micro controller on board motor driver for driving 2 dc motors or 1 stepper motors motor enable disable control switch onboard 4 channel adc optional lcd interface pc interface through uart 11.0592 mhz crystal exposed all io port for general-purpose application five tact switches for external input, reset and interrupt four test leds for status and debugging purpose buzzer for generating audible response exposed isp pins for programming on board programmer for p89v51rd2 microcontroller on board regulated power supply dual power supply for logic and driving load.

We are offering computer motherboards. The lpc1768 microcontroller has 512kb of internal flash and 64kb ram. Ethernet mac, usb devicehostotg interface, 8-channel general purpose dma controller, 4 uarts, 2 can channels, 2 ssp controllers, spi interface, 3 i2c-bus interfaces, 2-input plus 2-output i2s-bus interface, 8-channel 12-bit adc, 10-bit dac, motor control pwm, quadrature encoder interface, 4 general purpose timers, 6-output general purpose pwm, ultra-low power real-time clock (rtc) with separate battery supply, and up to 70 general purpose io pins

We are offering arduino duemilanove board (atmega8) - s/n 129013. Atmega8 arduino board sn129013 arduino board is a microcontroller board based on the atmega328p. It has 14 digital io pins, 6 analog inputs, a 16 mhz crystal oscillator, a usb connection, a power jack, a reset button, a power switch as well as on board motor driver ic(l293d). It contains everything needed to support the microcontroller, simply connect it to a computer with a usb cable or power it with a ac to dc adapter or battery to get started. This board uses the ftdi usb to serial driver chip. microcontroller atmel atmega328p operating voltage of 5v maximum supply voltage 6 to 20v digital io pins 14 dc current per io pin 40 ma dc current for 3.3v pin 50 ma flash memory 8kb of which 2kb is used by boot loader sram 1kb, eeprom 512byte clock speed 16mhz can be powered via the usb connection or with an external power supply

We are offering atmega 32 development board - s/n 107010. Avr development board 107010 is especially designed for those having interest in electronics, embedded system, robotics and industrial-automation. This board is made in such a way that it becomes easier for anybody to learn about avr micro controllers. This board can also be used in various industrial applications and projects. Avr development board 107010: includes atmel’s atmega32 microcontroller with 32kb flash memory working at 16mips compatible with all avr 40 pin micro controllers. On-board lcd interface (it can also be used for any other general purpose application). On-board motor driver for connecting 4 dc motors or 2 stepper motors onboard servo interface on-board regulated power supply. Pc interface through uart. On-board buzzer. 16 mhz external crystal. Exposed all 32 io pins. Exposed 8 channel io pins for adc and sensors with 5v1a power supply. Exposed 8 channel io pins for servo and sensors with dual power supply. Five tact switches for external input and reset. Four test surface mounted leds for status and debugging purpose. On board usb programmer. Dual or single power supply option. Exposed isp pins for programming.

We are offering non - programmable 10 in 1 mother board - sn 812322.

We are offering non - programmable 9 in 1 mother board - sn 103010.

We are offering l293dne shield - s/n 139510. This is basically a motor driver ic which takes input from microcontroller and is able to drive the dc and stepper motors by using separate power supply 5-40v.

We are offering 2 in 1 relay board - s/n 811141. Two relay switch in one board.

We are offering 7 segment display - sn 135504.

We are offering matrix led - sn: 105511 led matrix display.

• Country of OriginIndia

We are offering Max232N Shield - S/N 139411. Feature: input voltage levels are compatible with standard сmos levels output voltage levels are compatible with eiatia-232-e levels single supply voltage: 5v low input current: 0.1μa at тa= 25 °с output current: 24ma latching current not less than 450ma at тa= 25°с the transmitter outputs and receiver inputs are protected to ±15kv air esd low cost application: battery-powered rs232 systems terminals modems computers

We are offering rtc module - s/n 808520. Feature: real-time clock (rtc) counts seconds, minutes, hours, date of the month, month, and day of the week, and year with leap-year compensation valid up to 2100. 56-byte, battery-backed, general-purpose ram with unlimited writes. I2c serial interface. Automatic power-fail detect and switch circuitry. Consumes less than 500na in battery-backup mode with oscillator running. Optional industrial temperature range: -40�c to +85�c. Available in 8-pin dip. connected with clock crystal of 32.768 khz.

We are offering cc2500 module. Product id: imcir-addcir-cc2500, cc2500 module

We are providing dtmf module - s/n 93521. Decodes dtmf tones to 4 bit binary value this module can be used to make mobile operated robots and other mobile operated gadgets this module is poweredby zarlink's mt8870de ic onboard pins for supply and audio connector.

We are offering bluetooth module - s/n 134504. Feature: ready to use bluetooth module fully qualified bluetooth v2.0+edr 1.8v core, 1.8 to 3.6v io low power 1.8v operation minimum external components integrated 1.8v regulator usb and dual uart ports support for 8mbit external flash on board reset switch is present. Led as work mode indicator is present for supply and bluetooth connections (pairing or connected) using on board jumper one can switch bluetooth module from pairing mode to configuration mode(hc-05 at command mode) separate connectors are present to connect bluetooth module to microcontroller board or computer application: personal digital assistants (pdas) computer accessories (compact flash cards, pcmcia cards, sd cards and usb dongles) digital cameras cable replacement barcode scanners measurement monitoring system industrial sensors and control medical devices asset tracking

We offer avr usb programmer - s/n 810210. Product id: imcir-addcir-avr_usb_prog

We are offering Motor Driver L293D - S/N 89110. Product ID: IMCir-AddCir-MD_L293D

We are offering Motor Driver L298. Product ID: IMCir-AddCir-MD_L298

We are offering acceleration sensor - s/n 118811. Product id: imcir-sensor-accrlr_118811

We are offering analog sound sensor - s/n 104811. On board mic analog operation on board female connector for data , supply and ground can be use for various embedded applications low cost.

We are offering analog optical sensor - s/n 812840. Simple design led and photo diode as a transmitter and reciever analog operation cost effective

We are offering digital optical sensor/multi-purpose optical sensor - s/n 144810. Simple design infra red led and photo diode as a transmitter and recieverdigital operation - cost effective

we are offering Digital Sound Sensor cum Timer - S/N 103811. double sided pcb design on board mic power indicator led digital operation on board potentiometer cost effective

We are providing small size touch screen with 4 pin female connector. Product id: imec-tocscrn-smallrect4f

We are offering bo wheels with rubber grip. Product id: imhw-chassis-bowheel_grip

We are offering big plastic wheel - 6mm dc motor shaft product id: imhw-chassis-6mmwheel.

We are offering small plastic wheel - 6mm dc motor shaft. Product id: imhw-chassis-6mmwheel_s

We are offering mega robotic chassis without motors. Product id: imhw-chassis-mega

We are offering auto chassis specially designed for sumo wrestling / robowar - without motors. Product id: imhw-chassis-sumo_war

We are offering robotic arm with motors. Product id: imhw-chassis-arm_motors

We are offering mini robotic chassis with motors. Product id: imhw-chassis-mini_motors

We are offering mega robotic chassis with motors. Product id: imhw-chassis-mega_motors

We are offering hexapod with motors. product id: imhw-chassis-hexapod_motors.

We are offering two wheel balancing chassis. Product id: imhw-chassis-balancing_bomotors

We offer stair-case climbing robot with motors. Product id: imhw-chassis-staircase_m

We are offering fork lifting robot. Product id: imhw-chassis-forklifter_m

we offer robotic crane with motors. product id: imhw-chassis-crane_m

we offer x cavator chassis with motors. product id: imhw-chassis-xcavator_m

We offer robotic arm on vehicle with motors. Product id: imhw-chassis-arm_wheel_m