Mumbai, Maharashtra, India
Our Products
Teleflo In Line And End Of Line Detonation Type And Deflagrations Type Flame Arrestors Or Arresters, Teleflo Spark Arrestors, Teleflo Emergency Vents, Teleflo Free Vent, Teleflo Breathers PVRV, Teleflo Vent Head Caps, Teleflo End Of Line Vents, Teleflo Flame Banks, Teleflo Flash Arrestors, Teleflo Gauge Hatch, Teleflo Slot Dipping Devices , Etc.
Operation
Flame Arrestors, detonation flame arrestors, detonation arrestors, flame detonation arrestors stop the propagation of a flame by absorbing and dissipating heat through the large surface area of the bank sheets. Ignited vapor attempting to pass through the arrestor is forced through small passages within the bank assembly. Heat is absorbed, lowering the temperature of the gas below its ignition point and quenching the flame. Flame Arresters are typically used in the chemical, petrochemical and pharmaceutical industries on applications such as storage tank facilities, flare stacks, incineration systems, storage tank roofs or digester convertor to prevent the propagation of confined and unconfined deflagrations. Detonation flame Arresters additionally stop the high pressures and velocities that can result in detonations. Incase of ignition of vapors they burn harmlessly at the flame arrestor, preventing ignition of vapors in the tank and subsequent explosion.
Design Features
The main benefits of the Teleflo Atmos. detonation flame Arrestor, flame arrestors, detonation arrestors, flame detonation arrestors are derived from ifs unique element design. The large channel openings provide excellent pressure drop to flow and enhanced flow characteristics often resulting in reducing overall size and cost of both Flame arrestor and piping. In addition to this the less restrictive nature of the larger channel openings result in less clogging and easier cleaning - both important maintenance considerations. Finally the element enables higher operating pressures to be achieved. The 'Teleflo Atmos' Flame Arrestor after extensive research has been certified and type tested by FCRI, B.V. and other government agencies, and has also received the most stringent approval for Flame Arrestors, incorporating extended burn time performance, and have acceptance with B.P.C.L, I.O.C.L, H.P.C.L, L & T , REL , RIL & B.H.E.L., and many chemical, pharmaceutical , power industries and petrochemical industries.
Configuration
'Teleflo Atmos' Flame Arrestors are available for all common gas groupings to IEC or NEC codes, and supplied in range of sizes/materials/options; Net Free Area - three to four times, Bank Assembly - extensible and removable. Special "off-set" housing design is not affected by condensate accumulation, even when installed in horizontal piping. The result is minimal pressure drop, increased flow capacity and heat dissipation. Ordering information given below
| Size: 1" to 36" Refer graph for sizing. |
Location: Within 15' (4.6m) upstream of flame source. |
Pressure Dop: Refer Graph, Should Not Exceed 1 PSI. |
Materials: Low Copper aluminum, steel, SS 304/316 stainless steel. |
| Codes: API, ASME, CCE, IS etc. |
Tests: Type test, pr, drop, flame propagation, API 2000. |
Element: Plate stack or crimped metal |
Installation: In-line, end-of-line, inverted, weather hood requirement. |
Placed on the top of flammable liquid storage tank, our Emergency & Conservation Vents are used for relieving excessive internal pressure caused by the exposure of the tank to fire. Explosions caused by such conditions may be readily avoided by providing adequate emergency vent, emergency relief vent, end of line vent which permit the vapors to escape from the tank. These emergency vents usually include pallet assemblies, which are weighted to stay closed under normal pressure conditions and which open only when a predetermined pressure is attained, thus relieving the abnormal volume of vapor generated under the fire condition.
Made of quality material and components, ourGauge Hatchis used for controlling evaporation process and for dip measurement or for sampling purpose.Gauge Hatchplaced on the top of the tank, these hatches can easily be opened by pressing the latch with hand or foot. Our range ofGauge Hatchis provided with bleeder attachment that makes it possible to relief pressure before opening the tank.
APPLICATION :
FLUIDYNE range of Gauge Hatchesallow easy access to atmospheric liquid storage tank for manual level measurement (dipping), temperature measurement and sampling.
BENEFITS :
* Robust construction to cope with regular use.
* Range of size and materials to suit a wide range of application.
* Non-sparking feature, provide by the use of Nitrite rubber or PTFE insert.
* The cover is designed with a condensation rim. This encourages liquid drainage form the surface to reduce the possibility of freezing.
* Lockable handle and gas tight seal to 2.5 psig.
PRINCIPLE OF OPERATION :
Provides tank access where manual level gauging, temperature measurement or sampling is required the safety pedal allows the operator to open theGauge Hatchwhilst remaining 'hand free' to carry out required measuring.ORDERING CODE :
MODEL-SIZE-PROCESS CONNECTION-MATERIAL-INSERT e.g. (FGH 100, 4", ANSI 150# Connection, Aluminium Body, Nitrite Insert).
Slot Dipping Device is designed to provide a convenient and safe means of manually measuring the levels and taking samples of petroleum, petrochemical, chemical and other volatile or hazardous liquid in bulk storage tank.
It is a muffler for exhaust pipe in both light and heavy vehicles. It is mandatory to use in the highly sensitive area / zone.
Free vent for use on any atmospheric tank, protecting against internal pressure build up. The large weather hood is designed for maximum air flow from your tankthoughthe free vents.
We Are The Manufacturer of Supplier Of Dip Stick And Dip Rods Which Have the Following Types:
Teleflo Dip Level Sticks, Teleflo Dip Rods And Dip Gauges Tapes And Scales With Adaptors And Covers, Teleflo Slot Dipping Device, Etc.
Our Dip Sticks are made of superior quality non Sparking material with calibrated scale for fast and accurate measuring of the fuel level. These equipment are desinged for the personal safety of the person inspecting the tank. For measurement , simply dip the stick in the tank and the fuel level can be read off against the calibrated scale on the side of the dip stick.
Accessories like dip stick adaptor, dip stick housing and dip cap can also be supplied with the dip stick.
Dip Stick calibration is tracable to NABL, National and International Standrads.
MOC: Aluminium (Standard), Brass, Bronze, Stainless Steel available.
Our vents and fill caps are specially designed to hold a constant tank pressure, reducing evaporation loss, contamination intake, over expansion, and contraction of the tank. These caps are generally used for above ground storage and tanks holding gasoline or diesel. Additional elements can be mounted on top of the filler cap for specific operational purposes.
We Are The Manufacturer of Supplier Of Lightning Arrestors Which Have the Following Types:
Various Types Of Teleflo Lightning Arrestors Rods And Earth Electrodes In Copper Aluminum And Steel.
MODEL LA-100
The lightning protection system consists of Aerial Elevation Rods at 100 M radius with copper spikes, Brackets, Down Conductors and Intermediate Aerial Elevation Rods at every 20 M, Saddle with Clamps and Earth Electrodes.
Lightning is actually a visible discharge of static electricity within a cloud, between clouds and also between cloud and earth. The light protection system offered by us provides a means by which this discharge might leave or enter the Earth without actually passing through and damaging non-conducting parts of a structure. The Lightning Protection System has undergone many changes and today's lightning protection system offered by us exhibit the best in terms of design, materials and installation, thus valuable life and property can be well protected from nature's hazardous phenomenon like lightning. An important factor to note is that the higher the spike, the more the radius of protection. There are different types of lightning arrestors or thunder spikes available, the important issue being to select the one that will achieve the purpose.
Factors to be considered for selection are mainly peak values of discharged current and voltage. A design specification will be necessary for a particular area. General Design is as per BS6651:1992 code. Standard Manufacturing range include capacity of 5KV to 36KV and current rating of 5KA or 10KA. The magnitude of the surges is 10kA (10, 000A) for station class arresters and 5kA for intermediate and distribution class arresters. Other ranges are offered on request.
Teleflo offers advanced earthing electrodes which are very effective and ensures safety and have been designed to reduce soil resistivity locally and improve the grounding systems. They are very simple, totally maintenance free Fit & Forget Installations, Corrosion Proof, Weather Proof, Water resistant, Maintenance Free for almost 10 years, Highly Durable, Life Saving and Cost Effective Solution for the lifetime. Proper earthing ensures longer life of the whole system.
We bring forth our clients a qualitative range ofManhole Covers.These are designed and manufactured using quality materials and in accordance with the set industry standards. Our range is considered as non-sparking low pressure manhole covers and provides easy access to low pressure storage tanks.
Benefits:
Principle of Operation:
These covers provide access to tanks for maintenance and cleaning purposes. The manhole is secured by a transverse beam, which is attached to the center of the cover. This ensures even distribution of the holding down force to form a gas tight fitting.
Our esteemed clients from different industry verticals are offered with a qualitative range of Flat Glass Level Gauges. These are specifically designed to provide excellent performance and withstand high pressures to which it is subjected and the corrosive characteristics of the fluid. Our personnel also ensure that the process fluid does not leak through the glass fitting. These are ideal for measuring the levels of colorless liquids, interface of immiscible fluids, liquids with sub-zero temperatures and liquids with too much foaming.
In industries, you may have to measure the levels of colorless liquids, interface of immiscible fluids, liquids with sub-zero temperatures and liquids with too much foaming. All these requirements can be met with by our latest types of flat glass level gauges.
We provide high quality and most effective range of tubular level indicators that suit various industrial applications. We also offer wide varieties of gauge glass protectors. Various types of tubular level gauges available with us are :
BCO - Offset Connection Tubular gaugesOur BCO tubular gauges are superior in quality that are manufactured with a pair of auto shut off ball check valves with offset and union construction. Because of their simple design, and their ability to work without additional isolation valves they can be installed very easily and cost-effectively.
The innovative offset construction of the valves enables glass tube's to be replaced while in use. Whenever the glass tube breaks the ball check arrangement automatically closes the valve seat and prevents wastage of any fluid. Glass tube protection in the form of " Tie Rods" or "Pipe Shield" is provided.
HDO Heavy Duty Channel Protector GaugesOur highly effective tubular level gauges come with heavy wall glass tubes with 3 mm thick machine made channel protector. Designed to endure extreme conditions these valves offer very high durability.
Our superior quality transparent level Indicators are equipped with heavy valve glass tubes fitted. These valve glasses are fixed with a heavy duty metallic frame, which is made from min. 3mm thick channel box type protectors. We can also provide auto-shut-off ball check, needle or ball valve isolator as an integrated part with these indicators, if required.
These are designed specially to endure to extreme conditions and they can easily withstand alignment stress. Our premium indicators are available in two varied models : Side Mounted type and Top Mounted type.
Side Mounted Heavy Duty Indicators:
Our side mounted indicators are designed keeping in mind the extreme conditions they would have to face. They are manufactured using very strong materials and hence also provide prolonged durability. These indicators have built-in glands and we can also provide valves if required.Top Mounted Level Indicators:
Top mounted level indicators offer high levels of security to the storage tanks. Since they are mounted at the top of the tank, it reduces the risk of hazardous fluids getting spilled through any leakage. Theres a float that is channelized in the tank by a perforated pipe and a sealed glass tube. Float steam tip has an in-built pointer, which correctly indicates the level.
We bring forth our esteemed clients a qualitative range ofMagnetic Level Indicators. These are also known as liquid level indicators and are designed for offering high clarity indication of liquid levels. This range comprises a magnet in the float wherein the indicator rises or falls with the liquid. The float transfers this information to the indication rail that is mounted on the outside of the tube. Our range also comprises white and red indication flaps that represent air and liquid levels respectively. These are ideal to be mounted in various orientations such as the side, top or bottom of the vessel. Moreover, these are suitable for use in high pressure, high temperature, colored and corrosive liquids.
The Teleflo Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The Telelfo Oil Level Indicator is a clear borosilicate or acrylic tube or flat glass with , , BSP or NPT threads at one or each end. Red and green lines are sometimes included with the teleflo oil level indicator to mark upper and lower limits, or to designate running oil level and idle oil level. It can be installed with the optional breather at the top port. If the user requires a closed loop, top connection can be used as a connector port to feed back into the system. Operators can visually monitor the level of and take appropriate preventive action. The knob type oil level indicator is the simplest oil level monitoring indicator available in sizes 1/2 to 2 BSP(M).
Sensitron Thermocouples and wells are designed for making available to the industry a complete range of thermocouples for measuring temperatures from 150C to 1600C and, are highly accurate and sensitive. These thermocouples are offered with a very wide range of thermowells of different materials to suit the application.
Basically, a thermocouple is composed of two dissimilar metal wires butt welded together in a circuit. The circuit develops a small EMF, in accordance with See back effect, between the measuring and reference junctions. This EMF can be measured by means of any pyrometer in terms of temperature.
Sensitron Thermocouples are fabricated by gas or arc welding or resistance welding in accordance with ISA recommendations.
Special Thermocouple
The assembly consists of single or duplex thermocouple elements with cylindrical ceramic insulators encased in a spring loaded stainless tube. It is supplied with a screwed cover head and pipe nipple with 4 ' NPT mounting thread. In order to get highest speed of response to a temperature change, the last inch of the bore in the well is reduced in diameter to provide a tight fit around the sensitive tip of the thermocouple.
The spring loaded feature ensures positive metal to metal contact between the thermocouple and well allowing the highest possible rate of heat transfer to the measuring junction. Spring padding also allows movements of the thermal element due to expansion and contraction without damage to the element or connecting head and terminal block.
We Are The Manufacturer And Supplier Of Rota meters & Flow Meters Which Have The Following Types:
Teleflo Glass Tube, Acrylic, Metal Tube & Magnetic Rota meters And Flow Meters with Flow Switches, Teleflo Orifice Plate or Carrier Ring Type By-Pass Rota meters, Teleflo Purge Rota meters Etc.
We have pleasure in introducing our superior variable area flow meters and rotameters and industrial rotameters with special types offered for general industrial service and instrumentation requirements. Glass tube rotameters are offered where general flow measurements are within the limitations imposed by pressure rating of the glass metering tubes. For higher pressure ratings we offer metal metering tubes. Rotameters and industrial rotameters manufactured are of panel mounted types as well as pipe line mounted types. The pipeline mounted instruments are constructed to withstand pipeline installation stress, strain and vibrations. The unique gland arrangement ensures zero leakage and long life to the metering tube.
Purge Meter(Low-Flow Rotameters)
Measure low flows of gas, air, water with accuracy using this type of flow tube. This is ideal for laboratory or instrumentation applications. Mounting can be panel or by optional tripod base. Available in complete acrylic body or stainless steel body with glass metering tube. Dependable flow control is provided by needle valve located at inlet front of frame. Center line dimensions standard for back panel mounting are 65mm, 150mm and 200mm.By - Pass Rotameters
By-pass rotameters are suitable for economical measurement of flow in larger pipelines generally 2" NB to 14" NB. The construction is simple and reliable consisting of orifice plate with carrier ring and a shunt rotameter. The flow rate through the rotameter is proportional to the pressure drop across the orifice plate created by the main flow and is calibrated accordingly. During installation care should be taken to ensure laminar flow in the pipe section. Orifice plate dimensions are based on ISA/ ISO/BS standards.
Metal Tube Rotameters
Armoured metal tube rotameters are recommended for liquids or gases where process or operating conditions make all-metal construction desirable. This type of rotameter is also usefui for metering opaque fluids. The meter is manufactured in various materials of construction and with 150, 300 or 600 # flange connections. In our model RMC - 100 an extension with magnetic lenier indicating scale is bolted to the meter to indicate the float position. In another modification model RMC - 200 a dial type of indicator is provided.
| Model No | Float Mat | Meter Size | Maximum | Flow | Rate | PR Loss Water Kg/CM² | PR Loss Air Kg/CM² | Max Tube Rating Kg/Cm² |
| Water LPH | Air LPH | Air Nm³/hr | ||||||
| RM-0-A | PTFE | 6 | 5 | 160 | 0.16 | 0.10 | 0.05 | 15 |
| SS | 10 | 300 | 0.30 | |||||
| RM-0-B | PTFE | 6 | 10 | 320 | 0.32 | |||
| SS | 20 | 600 | 0.60 | |||||
| RM-0-C | PTFE | 6 | 20 | 640 | 0.64 | |||
| SS | 40 | 1200 | 1.20 | |||||
| RM-0-D | PTFE | 6 | 40 | 1280 | 1.28 | |||
| SS | 80 | 2400 | 2.40 | |||||
| RM-0-E | PTFE | 15 | 80 | 2560 | 2.56 | 0.15 | 0.07 | 12 |
| SS | 160 | 4800 | 4.80 | |||||
| RM-0-F | PTFE | 15 | 100 | 3200 | 3.20 | |||
| SS | 200 | 6000 | 6.00 |
We Are The Manufacturer And Supplier Of Orifice Plate Assembly And Venturi Which Have The Following Types:
Teleflo Orifice Plate, Orifice Plate Assembly Etc.
Weldneck, screwed, slip-on forged flanges. Flange taps, vent and drain. Orifice plate of SS, Monel with tag. Plat design as per B.S./A.P.I. Std. H.T. Bolts and Nuts. Jack screw provision.
Specifications:
| 1 | Flange: | CS, SS, A-105, CL I, CL II, A 181, A 182, IS 2002 | ||
| 2 | Flange Rating: | 150#, 300#, 400#, 600#, 900#, 1500# | ||
| 3 | Orifice Plate: | SS 304, SS 316, Monel, etc. | ||
| 4 | Orifice Type: | a) Sharp edge-straight. b) Bevel edge, c) Concentric. d) Eccentric. e) Segmental. | ||
| 5 | Drain & Vent Holes: | Provided on request | ||
| 6 | Flange Taps: | Two taps at 180 degree ½" BSP/NPT/BSPT (F) 2 Nos. per flange at 15/16" from raised face. | ||
| Drill size: ½" Ø-for under 2 ½" | 3/8" Ø-for 3" & 3 ½" | ½ Ø-for 4" & over | ||
| 7 | Jack Screws: | Two dog-point bolts on one flange at 180 degrees to facilitate removal of plate. | ||
| 8 | Gaskets: | CAF, PTFE, Spiral-wound, Ring Joint etc. | ||
We Are The Manufacturer And Supplier of Flow Switches Which Have the Following Types:
Teleflo Target or Paddle And Plunger Type Flow Switches With Adjustable Settings.We offer our clients a comprehensive range of Flow Switches that is manufactured from finest quality raw material in compliance with set industry standards. Widely appreciated for its unmatched quality and performance, this range is offered in:.
Plunger-Flapper-Paddle-Diaphragm types
Magnetic Glandless switching
Micro switch, mercury and air break type
Flanged, screwed connections
Ideal for alarms, tank overflow and motor control
Special design for vertical / horizontal flow
Level switch - nine types for every application
Internal, external, side and top mounted
Micro switch - mercury, air break and air Nvalves
Operating alarms
Motor control, level control with snap action contacts with NO/NC controls
Float operated Magnetic and Glandless
ollowing Types:
Teleflo Humidity Moisture or Carbon dioxide Silica Gel Breather Separator Absorber or Eliminator.
Silica gel breathers are used for absorption of moisture vented from storage tanks. They have desiccant or absorbers like silica gel packing available in industrial and food grades. Similarly carbondioxide absorbers (C02 ) absorbers have suitable soda lime or caustic packing to suit the service requirements. They are provided with view glass. They are designed to handle high flows and can be supplied with weather hood or goose neck arrangement for outdoor installations.
at Bombay. under rigid quality control and inspection. They have been installed In many reputed projects- Power. Fertilizer. Pharmaceutical. Chemical and process Industries.
Strainers and Filters entrap scales. solid particles. dust. sand etc which may cause damage to valuable Plant and Machinery. Valves. Pumps, Blowers, Sprayers, Gas and Oil injectors, Compressors, Bearings, Burners etc. They help to avoid contamination to food. drugs and process fluids.
TELEFLO STRAINERS are designed to offer maximum reliability and are of rugged construction for long life; Our well equipped and qualified design team will select and design the most suitable strainer and mesh type required by you and your industry.
Teleflo Strainersare manufactured from graded castings from reputed foundries. Fabricated strainers are manufactured from seamless pipes. Castings and welds are tested by D.P. Ultrasonic and X-Ray Radiography for critical services. Test bar analysis of heat numbers is carried out for chemical and physical properties. Rigid stage-wise inspection and hydraulic test at 1.5 to 2 times working pressure.
Teleflo Strainersare the first choice because of perfectly streamlined flow profiles and a large free flow area to accommodate large size of mesh. The result, better filtration, less clogging and low pressure drop. The strainers are built to withstand fluctuation in pressure, vibration, super-heat and corrosive medium.
Teleflo Stainerscover 'Y' type, Bucket, Flat plate type, Fabricated Cast, Simplex and Duplex. Mesh from 6 x 6 to 250 x 250. Materials:graded Cast Iron, Steel, Bronze, SS 304, SS 316, Flanged, Screwed and Buttweld, Forged barstock strainers are offered Upto 1500 P.S.I.
Teleflo Strainersare designed to take into consideration process data, location in pipeline, application, maintenance requirements and degree of filtrati onrequired. Construction of body and mesh are made to suit these requirements. Cover and basket is designed for easy removal and cleaning, for inspection and maintenance. Drain plugs are provided to blow off accumulated foreign particles. Drain valve is provided on request. Lifting eye bolts or lugs are provided on larger sizes. Complete test certificates for materials, hydro-test third party inspection certificates will be provided as required.
Our range of Basket Type, T Type filters and stirrers are heavily appreciated across numerous industries for superior performance and longer service life. This range has screens made up of stainless steel, brass and Monel. Best suited for gas, vapors, liquids and steam, this range is offered in Y" type, Bucket, 'T' type and Duplex at very economical prices. Some of its pertinent features are as follows:
supplied to customers specifications suitable of lengthy cross country pipelines for line sizes 2 " to 36". Also Known us Slide Bearing.
Other Information
Teleflo Ball Type Sight Glass Model FSG 250is used in pipelines by horizontal installationfor indication of flow. The verticalmovement of the PTFE ball insidethe glass dome indicates flow of the fluidandcan be viewed from any direction.
We manufactures and supplies manual hydro test pumps to avoid undue problems. The vip hydraluic test pumps are portable type and can be easily handled by one man. Pump unit mounted on fabricated m. S pail which stores liquid for testing as well as provides self base for testing separate foundation is not necessary.
We offer Air-Hydro (Booster) Test Pumps. for our clients as per their requirment.
The Hydraulic Pressure Test Pump is compact weight and can be unbolted to carry easily. Stand is designed in such a way top keep on flat / plane surface and operators without any foundation. Even for high pressure pumps no fixing or foundation is needed. All the working parts are made of stainless steel to the specified pressure. The threaded so that any be easily replaced at site. Accessories pressure gauge, check valve, siphon, needle valve, hydraulic hose provided on request.
Teleflo Laboratory Stirrers have maintenance free Electric or Air motors driven mixing elements ideally suited for continuous duty stirring and mixing applications. Teleflo Stirrers have sturdy adjustable stand, low noise, smooth start and stop with heavy duty AC/ DC Universal or Induction Motors ranging from 1/12 HP to 1.5HP. and speed 100 RPM to 15000 RPM. Retort Stand height ranges from 350 mm to 1500 mm. Capacity (depending on viscosity) ranges from 1 liter to 200 liters.
Electronic or Autovariac speed control regulators are also provided on request. Coupling is of bush type or self centering chuck type. Material of construction is of Stainless Steel SS 304 or SS 316. Teflon or PP lined mixing elements also available for specific applications. Special GMP stirrers available for Pharmaceutical Industry.
Teleflo Industrial Mixers are available in Stainless Steel SS304, SS316, Teflon or PP lined material of construction, are of three types :
Our drum mixers are light and portable with electric or air motor and ideal for easy and rapid stirring up suspensions and mixing additives in drums. For convenience and safety the unit incorporates a threaded 2" BSP or NPT bung adaptor nipple to allow mounting on standard 55 gallon ( 205 liter) drum. Models are available with either folding propeller or fixed blades.
TelefloStatic mixers are a series of geometric mixing elements fixed within a pipe, which use the energy of the flow stream to create mixing between two or more fluids.Teleflohas optimized the design of out static mixers to achieve the greatest amount of mixing with the lowest pressure loss possible, whether your application involves low viscosity fluids, high viscosity fluids, fibrous materials, or just the need for a quick flash blend, we have a static mixer design available to optimize your blending process.DESIGN PRINCIPLE
TelefloStatic mixers are a row of carefully designed fixed mixing elements within a pipe ensure mixing between two or more fluids.Teleflodesign of static mixer creates very little pressure drop and the greatest amount of mixing.Teleflomixers are used in blending processes as well as mixing. Static mixers are also called motionless mixers This is because the mixing is done by permanently affixed mixing fins, obstructions, or channels mounted in pipes, designed for promoting mixing as fluid flows through the mixes.
The criteria for using motionless mixers is to achieve homogeneity of composition in a liquid without the need for external process mixing, which can be very costly and ofter questionable. When sizing/designing a static mixer the main factors to consider is the flow rate and the properties of the fluid, and it is possible to calculate the number of mixing elements required to produce a homogeneous mixture.Teleflo STATICMIXERS COME IN Type A (Standard) and Type B ( with injection port ) as per customer's choice.
We are one of the leading manufacturers ofPP/ PVC/ PTFE/ teflon & FRP Static Mixer. Our clients can avail from us a qualitative range of Static Mixers.These have geometric mixing elements fixed within a pipe, which uses the energy of the flow stream to create mixing between two or more fluids. This range possesses optimized design of static mixers that facilitates in achieving excellent mixing with the lowest pressure loss possible. These are ideal for low viscosity fluids, high viscosity fluids, fibrous materials, or just the need for a quick flash blend.
Teleflo Magnetic Stirreris compact stainless steel top, Solid state motorized magnetic stirrer. This variable speedMagnetic Stirrerhas step less solid state speed regulator having facility of soft start & & restart. These stirrers also available with hot plate designmagnetic stirrer.
TheseMagnetic Stirrersare intended for stirring solutions of low viscosity in open or closed containers/pans. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Each apparatus of this group can be operated on a bench, a stand or a laboratory scaffold. The intensity ofMagnetic Stirrerdepending on requirements can be adjusted with the thyristorised voltage controller incorporated which also ensures step less adjustments from a very low to the maximum agitation.
Operations:
Magnetic Stirrerhas Soft start facility increases the speed of rotation gradually, which does not allow Teflon magnetic bit to slip. Restart switch is provided to bring the Teflon stirring bit at the center. Speed is variable up to 800/1000/1800RPM.
