Post Buy Requirement
TI
Thane, Maharashtra, India
Add Review

Bath Linens #1614721

Cryo Bath

Construction: double walled construction with inner s.s. Argon welded one piece pot which avoids leakages. insulation: 2 thick puf insulation ensures temperature stability & reduced energy consumption. water circulation: circulation pump is provided for better uniformity of temperature instead of stirrer.side mounted circulating pump 18 ltr. /min capacity, single phase, 230 volts. heating system: s.s. Tubular heater (water immersion type) is used at bottom for better heat distribution. lid: top mounted removable lid. refrigeration system: cfc free hermitically sealed emerson copeland make compressor for better cooling with r 134 a (eco friendly) refrigerant with time delay to safe guard compressor. safety: 1.compressor on delay timer (2 min.) to safe guard the compressor2.in built over load protector provided for hermetically sealed compressor features: 1.caster wheel for easy movement. 2.circulation pump use for drain(do not dry run circulation pump). supply: 230v ac, single phase, 50hz specifications : standard model: inside s.s. 304 mirror finish argon welded one piece pot & outer mild steel (crca) sheet with powder coated. temperature range: 50 c to 900 c temperature accuracy: 10c control system: imported microprocessor based auto tuned pid controller with ce mark & dual display of set value & process value.
View Complete Details

Water Bath

We are offering water bath (electric, thermostatic) ti 240 / 241 are designed & manufactured to comply requirements of industries. Water baths are suitable for digestion in various sizes flasks supplied with concentric rings. It is doubled walled constructed supplied with drop on lid & ring with 6, 12holes of 7.5cm dia. Ti 240 model with 4 holes & 1 hole of 12.5cm dia. technical data temp. Range : 5c above ambientto 95ctemp. Accuracy : 2csupply : 230v, ac standard model inside s.s. 304 with mirror finish & outsidemild steel powder coated gmp model (ti 241 only) inside s.s. 316 with mirror finish & outsidestainless steel 304 with dull buff finish
View Complete Details

Water Bath

We are offering water bathtempo make shaker water baths are designed & manufactured to comply requirements of industries. Shaker water baths are used for sample thawing, bacteriological examinations, warming reagents, coliformdeterminations, microbiological assays, hybridization applications, cell cultures & aeration, increasing solubility rates, molecular biology assays & bacterial cultures. technical data temp. Range : 5c above ambientto 60ctemp. Accuracy : 0.5cshaking speed : 40 to 120 rpmspeed indicator : digital standard model inside s.s. 304 with mirror finish & outsidemild steel(crca) powder coated. gmp model inside s.s. 316 with mirror finish & outsidestainless steel 304 with dull buff finish.
View Complete Details

Water Bath

We are offering water bath are ideal for application in refractometry, polarimetry, rotational viscometry, in biotechnology laboratories for development of culture applications & general laboratory work. Besides it these constant temperature water baths are useful inchemical industry, biology, pharmacy, environmental protection, hygiene & disease control, academies and other science research and producing areas. technical data temp. Range : 5c above ambient to 90ctemp. Accuracy : 0.5csupply : 230v, ac standard model inside s.s. 304 with mirror finish & outsidemild steel powder coated gmp model inside s.s. 316 with mirror finish & outsidestainless steel 304 with dull buff finish
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shrikant Gawde (Tempo Instruments Pvt. Ltd.)
  • Top Syringe Compound, Behind Samrat Hotel, Pandurang Wadi, Mira Road(east),W.e.hghway, Mira Bhayandar, Thane, Maharashtra - 401101
  • Share us via
Manufacturer of Bath Linens from Thane, Maharashtra by Tempo Instruments Pvt. Ltd.
Post Buy Requirement
TI
Thane, Maharashtra, India
Add Review

Bath Linens #1614721

Cryo Bath

Construction: double walled construction with inner s.s. Argon welded one piece pot which avoids leakages. insulation: 2 thick puf insulation ensures temperature stability & reduced energy consumption. water circulation: circulation pump is provided for better uniformity of temperature instead of stirrer.side mounted circulating pump 18 ltr. /min capacity, single phase, 230 volts. heating system: s.s. Tubular heater (water immersion type) is used at bottom for better heat distribution. lid: top mounted removable lid. refrigeration system: cfc free hermitically sealed emerson copeland make compressor for better cooling with r 134 a (eco friendly) refrigerant with time delay to safe guard compressor. safety: 1.compressor on delay timer (2 min.) to safe guard the compressor2.in built over load protector provided for hermetically sealed compressor features: 1.caster wheel for easy movement. 2.circulation pump use for drain(do not dry run circulation pump). supply: 230v ac, single phase, 50hz specifications : standard model: inside s.s. 304 mirror finish argon welded one piece pot & outer mild steel (crca) sheet with powder coated. temperature range: 50 c to 900 c temperature accuracy: 10c control system: imported microprocessor based auto tuned pid controller with ce mark & dual display of set value & process value.
View Complete Details

Water Bath

We are offering water bath (electric, thermostatic) ti 240 / 241 are designed & manufactured to comply requirements of industries. Water baths are suitable for digestion in various sizes flasks supplied with concentric rings. It is doubled walled constructed supplied with drop on lid & ring with 6, 12holes of 7.5cm dia. Ti 240 model with 4 holes & 1 hole of 12.5cm dia. technical data temp. Range : 5c above ambientto 95ctemp. Accuracy : 2csupply : 230v, ac standard model inside s.s. 304 with mirror finish & outsidemild steel powder coated gmp model (ti 241 only) inside s.s. 316 with mirror finish & outsidestainless steel 304 with dull buff finish
View Complete Details

Water Bath

We are offering water bathtempo make shaker water baths are designed & manufactured to comply requirements of industries. Shaker water baths are used for sample thawing, bacteriological examinations, warming reagents, coliformdeterminations, microbiological assays, hybridization applications, cell cultures & aeration, increasing solubility rates, molecular biology assays & bacterial cultures. technical data temp. Range : 5c above ambientto 60ctemp. Accuracy : 0.5cshaking speed : 40 to 120 rpmspeed indicator : digital standard model inside s.s. 304 with mirror finish & outsidemild steel(crca) powder coated. gmp model inside s.s. 316 with mirror finish & outsidestainless steel 304 with dull buff finish.
View Complete Details

Water Bath

We are offering water bath are ideal for application in refractometry, polarimetry, rotational viscometry, in biotechnology laboratories for development of culture applications & general laboratory work. Besides it these constant temperature water baths are useful inchemical industry, biology, pharmacy, environmental protection, hygiene & disease control, academies and other science research and producing areas. technical data temp. Range : 5c above ambient to 90ctemp. Accuracy : 0.5csupply : 230v, ac standard model inside s.s. 304 with mirror finish & outsidemild steel powder coated gmp model inside s.s. 316 with mirror finish & outsidestainless steel 304 with dull buff finish
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shrikant Gawde (Tempo Instruments Pvt. Ltd.)
  • Top Syringe Compound, Behind Samrat Hotel, Pandurang Wadi, Mira Road(east),W.e.hghway, Mira Bhayandar, Thane, Maharashtra - 401101
  • Share us via