Other Products / Services #1719872

We are offering Abel Flash Point Apparatus.
A) electrically heated model with energy regulator with oil/gas jet test flame

b) electrically heated model with voltage varrier (digital display of voltage) with oil/gas jet test flame

c) electrically heated model with voltage varrier (digital display of voltage) with oil/gas jet test flame & with digital temp. Indicator

We are offering Temperature Control Trainer. Temperature control trainer is designed for understanding the basic temperature control principles. The process setup consists of heating tank fitted with ssr controlled heater for on-line heating of the water. The flow of water can be manipulated and measured by rotameter. Temperature sensor (rtd) is used for temperature sensing. The process parameter (temperature) is controlled by microprocessor based digital indicating controller which manipulates heat input to the process. These units along with necessary piping and fitting are mounted on support frame designed for tabletop mounting. The controllers can be connected to computer through usb port for monitoring the process in scada mode.

We are offering temperature measurement
the setup is designed to study
1 different types of temperature sensors for characteristics and time constants.
2 seebeck effect
3 temperature indicator and its calibration
4 temperature transmitter and its calibration
5 compensating cable, thermocouple connector

We are offering Pressure Control Trainer. pressure control trainer is designed for understanding the basic principles of pressure control. the process set up consists of pressure vessel fitted with pneumatic control valve. pressure transmitter is used for pressure sensing. the process parameter (pressure) is controlled by microprocessor based digital indicating controller which manipulates pneumatic control valve fitted at outlet of pressure tank outlet through i/p converter. these units along with necessary piping are fitted on support housing designed for tabletop mounting. the controllers can be connected to computer through usb port for monitoring the process in scada mode.

We are offering Level Control Trainer.
Level control trainer is designed for understanding the basic principles of level control. The process setup consists of supply water tank fitted with pump for water circulation. The level transmitter used for level sensing is fitted on transparent process tank. The process
parameter (level) is controlled by microprocessor based digital indicating controller which manipulates pneumatic control valve through i/p converter. A pneumatic control valve adjusts the water flow in to the tank. These units along with necessary piping are fitted on support housing designed for tabletop mounting. The controllers can be connected to computer through usb port for monitoring the process in scada mode.

We are offering Cascade Control Trainer.
The setup is designed to understand the advanced control methods used for complex processes in the industries. Different experiments like flow, level and cascade control can be configured and studied with the setup. It consists of water supply tank, pump, level transmitter, transparent level tank, orifice meters with differential pressure transmitters, rotameters, pneumatic control valve, i/p converter and serial based dual loop controller. These units along with necessary piping are mounted on support housing designed for tabletop mounting. The controllers can be connected to computer through usb port for monitoring the process in scada mode.

We are offering Pensky Martens Flash Point Tester.
a) Electrically heated model with energy regulator control with oil/ gas jet test flame

b) Electrically heated model with voltage varrier (digital display of voltage) with oil/gas jet test flame

c) Electrically heated model with voltage varrier (digital display of voltage) with oil/gas jet test flame & motorized stirrer

d) Electrically heated model with voltage varrier (digital display of voltage) with oil/gas jet test flame & motorized stirrer & digital temperature indicator

We are offering Flow Measurement Trainer.
The set up is designed to study following different type of units used for flow measurement.
1) venturimeter
2) orifice meter
3) pitot tube
4) rotameter
5) water meter
setup consists of flow measurement units under study, supply tank, submersible pump for closed loop water circulation, acrylic measuring tank with graduated scale and differential pressure measuring arrangement mounted on stand alone structure.

We are offering Flow Control Trainer. Flow control trainer is designed for understanding the basic principles of flow control. The process setup consists of supply water tank fitted with pump for water circulation. A dp transmitter is used for flow sensing which measures differential pressure across orifice meter.
The process parameter (flow) is controlled by microprocessor based digital indicating controller which manipulates pneumatic control valve through i/p converter. The control valve is fitted in water flow line. The controllers can be connected to computer through usb port for monitoring the process in scada mode.

We are offering Plc Trainer. Plc trainer set up is designed to demonstrate working capabilities of plc, its programming and ladder logic. The setup is working model of water filling system consisting of different types of inputs (6) /outputs (3) like float switches, micro switch, solenoid valves, pump and push buttons. The plc unit can be interfaced with computer through serial communication for software programming. It can also be operated in simulation mode to develop and study different ladder logic. The setup is tabletop mounted with in built control module.

We are offering Redwood Viscometer no. 1.
according to ip- 70 (without thermometer), used for determination of viscosity of lubricating oils and fuels with stainless steel jet (viscosity below 2000 secs)

redwood viscometer no. 2
according to ip- 70 (without thermometer), used for determination of viscosity of lubricating oils and fuels with stainless steel jet (viscosity above 2000 secs)

We are offering Kinematic Viscometer Bath.
A)full visibility constant temperature high precision kinematics viscometer bath for u-tube viscometer with digital controller-cum-indicator. Rectangular in shape as per astmd- 445.
B) our kinematic viscometer bath for u-tube viscometer as per astmd 445

auto viscosity calculator with digital stop watch

We are offering Saybolt Viscometer. as per astm d 88, suitable for determining the viscosity of fuel oil and lubricating oil- both thin & thick. complete with universal & furol jets made of 18/ 8 stainless steel , saybolt flask. stirring is done by hand with turn table arrangements