Our Product / Services
Specification
Part .NO | External Diameter Ø p(mm) |
Drum Height Ø h(mm) |
Body Thickness T1(mm) |
Crown Thickness T2(mm) |
Kelly Box Size K (mm) |
Picks NR. |
Kelly Box Size K (mm) |
---|---|---|---|---|---|---|---|
THCB040 | 400 | 1000-2000 |
15 | 30 | 200 x 200 | 18 | THCB040 |
THCB050 | 500 | 1000-2000 | 15 | 30 | 200 x 200 | 20 | THCB050 |
THCB060 | 600 | 1000-2000 | 15 | 30 | 200 X 200 | 25 | THCB060 |
THCB080 | 800 | 1000-2000 | 15 | 30 - 40 | 200 X 200 | 30 | THCB080 |
THCB100 | 1000 | 1000-2000 | 20 | 30 - 40 | 200 X 200 | 34 | THCB100 |
THCB120 | 1200 | 1000-2000 | 20 | 30 - 40 | 200 X 200 | 38 | THCB120 |
THCB150 | 1500 | 1000-2000 | 20 | 30 - 40 | 200 X 200 | 46 | THCB150 |
THCB200 | 2000 | 1000-2000 | 20 | 30 - 40 | 200 x 200 | 60 | THCB200 |
THCB250 | 2500 | 1000-2000 | 20 | 30 - 40 | 200 x 200 | 78 | THCB250 |
Specification
Part .NO |
Drilling Diameter Ø p(mm) |
Internal Diameter Ø i(mm) |
Thickness T1(mm) |
Single Wall T2(mm) |
Double Wall T3(mm) |
Length L (mm) |
---|---|---|---|---|---|---|
THCB040 | 400 | 340 | 30 | 10 | 8 | 1000 - 6000 |
THCB050 | 500 | 440 | 30 | 10 | 8 | 1000 - 6000 |
THCB060 | 600 | 540 | 30 | 10 | 8 | 1000 - 6000 |
THCB080 | 800 | 720 | 40 | 15 | 10 | 1000 - 6000 |
THCB100 | 1000 | 920 | 40 | 15 | 10 | 1000 - 6000 |
THCB120 | 1200 | 1120 | 40 | 15 | 10 | 1000 - 6000 |
THCB150 | 1500 | 1420 | 40 | 15 | 10 | 1000 - 6000 |
THCB200 | 2000 | 1920 | 40 | 15 | 10 | 1000- 6000 |
Models available in four sizes for scribing circles up to 80" in diameter 40" radius. Folding type design three smallest models will fit conveniently into a shirt pocket. Sturdy friction joints maintain rigidity and accuracy, and are made from lightweight, rustproof aluminium for long wear. Soapstone crayon is included. The scribe holder will accept round, square or flat soap stone crayon, pencil or steel point scribe.
Specification
PART NO. | RADIUS (INCH) |
---|---|
TRM8 | 0 - 8" |
TRM20 | 0 - 20" |
TRM24 | 0 - 24" |
TRM40 | 0 - 40" |
The TAG Split Frame Clamshell range of portable cold pipe cutting and bevelling machines are designed for ease of use, even in difficult situations.
Thanks to their low profile frame they are the perfect machines for use when access to the pipe is restricted.
The TAG range of Cut and Prep Split Frame Clamshells are available with pneumatic, servo electric motors and hydraulic motors, and will cover a range from 1" to 54" o/d (6" range per ring).
Larger sizes are available on request. Cutting and bevelling can be performed simultaneously; any type of weld prep can be achieved including compound angles and "J-preps".
Download our Aluminium Light Weight Split Frame Clamshell Catalogue Here
This specialist service combines VAUTID’s superior hardfacing welding consumables, skilled craftsmanship, and the latest welding technology. It is available right around the world.
Flange Pins are an economical and efficient way to align flanges. For use in ½ - 1½" holes. Quick release design for fast flange alignment. Durable zinc coating finish increases tool life. For use in flange holes up to 1½" deep. Knurled handles increase grip. Lightweight 1.60kg / 3.5lbs.
Specification
PART NO. | SIZE (INCH) | DESCRIPTION |
---|---|---|
TQFFP1 | 7/16 - 1½" | Quick Fit Carbon Flange Pins |
TFPSS1 | 1/4 - 7/8" | Stainless Steel Flange Pins |
We manufacture top-quality individual components and production parts using VAUTID composite wear plates. These can be supplied as ready-to-assemble units or as components within complex steel fabrications.
Designed primarily for pipe fitting applications. For all metal work the magnetic feature will offer an extra hand. Multi purpose tool offers 360 degree adjustable dial set level. Includes 2 x 20 pound magnets exerting 50 pound pull this will secure the unit in place on any steel, this enables hands free levelling. For aligning flanges the TAG Magnetic Universal Level is designed to be used with the Quick Flange Pins.
Thermion manufactures different range of Piling Winches in configurations of Single, Double and Triple drum. The winches are specially designed and manufactured in a way that fits into your site working requirements.
Generals Specifications are :
Bored Piling Rigs & Accessories
Heavy Duty Tools such as Tripod, Bailors, Chisel, Tremie Set and Casings
Driven Piling Rigs & Accessories
Accessories such as Pile Shoes, Monkey Hammer Etc.
Features and AdvantagesAttaches and detaches in seconds Makes up earth leads three ways - lug, clamp onand bare cable A simple yet effective device eliminates earth lead twisting, tangling and unnecessary wear. Provides a stable earth for circumferential welding of pipes and fittings and eliminates weld pinholes caused by poor earthing. Anti-arc bearings take loads of up to 400 amps.
We Specialize in Manufacturing of Chisels with Hardox Wear Plates. These Chisels have Been Found to Be Far Better in Performance Than the Chisels Manufactured with En19/c45 Material.
hardox as We all Know is the Worlds Leading Abrasion and Impact Resistant Steel. the Hardox Steel is Hard Through and Through, from the Surface Deep Down to Its Core, Giving You Extended Service Life and High Productivity in the Most Challenging Environments.
Specification
PART NO. | SIZE (MM) |
---|---|
TFSQ300 | 300mm x 300mm / 30mm x 5mm |
TFSQ400 | 400mm x 400mm / 30mm x 5mm |
TFSQ500 | 500mm x 500mm / 30mm x 5mm |
Economical tool for marking straight lines around pipe, or for use of a straight edge. Made out of flexible gasket material, with good resistance to heat and cold.
Available in two colours, designating material type and service temperature. Gray material is used high temperature applications up to 550ºF asbestos free wrap-a-rounds in 3.88" and 5.00" feature a metric scale and pitch chart.
All sizes are printed with a scale in inches, pitch chart, tangent chart and other useful markings. Extra small and special order sizes are unmarked.
Specification
PART NO. | DIMENSIONS WIDTH (INCH) / LENGTH (FT) | PIPE SIZE (INCH) |
---|---|---|
TW3 | 3.88" / 4ft | 3 - 6" |
TW4 | 3.88" / 6ft | 3 - 10" |
TW5 | 5.00" / 7ft | 4 - 12" |
TW6 | 5.00" / 9ft | 6 - 16" |
TW3PF | 3.88" / ft length desired (priced per ft) | 3" - Any |
TW5PF | 5.00" / ft length desired (priced per ft) | 4" - Any |
Special length over 10ft up to 375ft |
Time saving tool designed to lay out pipe and structural joints. Precise layout of any angle, tees, wyes, crosses, elbows. Eliminated mathematical formulas/cut & try material waste. Consists of X-shape frame, calibrated protractor and a triple jointed marking arm and holder, the protract is calibrated on both sides, one side in degrees and other side in rise-inches per foot.
Specification
PART NO. | SIZE (INCH) |
---|---|
TCM18 | 1.5 - 18" |
TCM48 | 8 - 48" |
The TAG Centering Head aids in the setting of centre lines, establishing angles and marks, for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. Standard model is used on pipe ½" diameter and larger and has a 4" Y-type head fitted with an adjustable dial set level (DSL) and a manually operated hardened centering pin.The large centering head is ideal for pipe 1" diameter and up and has an 8" Y-type head and a DSL. A spring-loaded hardened centering pin eliminates the need for a hammer.
Specification
PART NO. | SIZE (INCH) |
---|---|
TCH | Standard ½" plus |
TCHL | Extra Large 1" plus |